Joining and fine cutting machine / veneer saw make SCHEER type FM 8 / 3100
machine. # 72824
Technical data:
Cutting length 3100 mm
cutting height 45 mm
Saw blade dia. 180 mm
Feed manual
power requirement 1,8 kW
dimensions 3950 x 470 x 920 mm
Bq3nlzsusc
weight approx. 400 kg
used, in good condition
second hand Scheer brand Type FM2-3000 Machine no. 113136 Motor 1.65 kW Cutting length 3000 mm Handwheel tension rear support table Space requirement approx. 3500 mm x 1200 mm x 1500 mm Total connected load approx. 1.65 kW Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty
Z0nhyh09
with scoring saw unit
Vudkt3
used, great condition, little run
Made by Scheer
Type FM 4-3100 K
Year of construction approx. 1980
Machine no. 4617
GS-approved
3 x motor 5 kW, 4 HP, 2 speeds
Saw feed handwheel
Cutting length 3100 mm
pneumatic tension
front support table
rear support table
Rip fence
Self-extraction with dust bag 0.37 kW
Scoring saw unit
pneum. Maintenance unit
Required space approx. 4800 mm x 1200 mm x 1300 mm
Weight approx. 800 kg
Storage location 97447 Gerolzhofen, free on truc...
used, cleaned, function checked,
partly revised
side guides renewed,
service unit new
manufactured by Scheer
type FM 2 3100
Masch.-No. 210 228
motor 1,8 kW
cut length 3100 mm
saw blade diameter ca. 150 mm
pneumatic clamping
rear extented table
pneum. service unit
required space ca. l x w x h mm
Gwttgs
3500 x 1000 x 1600
located in 97447 Gerolzhofen
sale in current condition as seen.
- free on truck -
Used veneer saw
Internal machine number: m2845
Manufacturer Scheer
Type FM 2-3100
Year of manufacture 1986
Ma. No. 80699
Speed 2,850 rpm.
power 1,85 kW
Weight approx. 380 kg
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
A forklift/crane for loading is available.
There is the possibility of expert examination of the articles for sale on the spot. Specific questions should be clarified in advance. The information, such as technical data, dimensions, ...
Fuegesaege and fine-cut saw with rear tray
Cutting length of 3100 mm
Angle stop links
pneumatic workpiece clamping
2.5 HP motor power
HM type fine-cut sheet, dimensions approx. 3750 x 1000 x 1150 mm (Lxwxh). Weight 400kg.
3fe3nvpmr
Location: Camp 54634 Bitburg
used, good condition
manufactured by Scheer
type FM 8-3100
Masch.-No. 83077
motor 1,85 kW
cut length 3100 mm
saw blade diameter ca. 160 mm
Bn0mwfhs7e
pneumatic clamping
rear extented table
self-exhaust
required space ca. l x w x h mm
4000 x 1000 x 1300
weight ca. 450 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
max. Schnittlänge : 3100 mm
mit hinterm Auflagetisch und Anschlagrechen
Sägeblattdurchmesser : 160 mm
Spannbalkenbewegung : pneumatisch
Be0m0xt
Absaugung : extern
Vorschubart : manuell
Bewegung Sägewagen : manuell
Maße: 3700 x 600 x 1100 mm
Gewicht : ca. 950 kg
Lagerort: Nattheim
Gebr. Veneer - Fineblanking saw
Manufacturer: Langzauner
Type: LZ 2/3050
year of construction: 1986
cutting length: 3.050 mm
Bqzk0njmdn
Support table rear 500 mm with mechanical stop
Support table front extendable
secondary milling unit
suction channel
condition: used, functional
Veneer saw machine manufacturer Scheer type FM 8-3100
Cutting length 3100 mm saw blade Ø max 180 mm motor 1,85 kW feed manual connection 380/50 Volt / Hz machine dimensions:
Length, 3750 mm width 1400 mm, height of 1300 mm, weight: 500 kg rear addition table
Bdfp0sx9zc
The trolleys do not belong to the machine
Location stock 54634 Bitburg
CATALOG NUMBER 5902
TECHNICAL DATA
- 3000mm cutting length
- pneumatic pressure
- max cutting height 25mm
- disc diameter 150mm
- disc hole diameter 30mm
- electric drive of the aggregate
- equipped with a table at the back
- dimensions of the table top 3000x790mm
- 2.5kW engine
- 0.12kW feed motor
- dimensions length / width / height 4100x1250x1440mm
Bltnyfruze
- weight 596 kg
ADVANTAGES
- German production
- very good condition
- used saw
Net price: PLN 4200
Net price: EUR 966
Net price, c...
used
manufactured by Mayer
type FS 3
Lg9osicr
Masch.-No. 1270
motor 2,2 kW
cut length 3500 mm
pneumatic clamping
front extented table
rear extented table
required space ca. l x w x h mm
4300 x 1000 x 1300
weight ca. 600 kg
total connected power ca. 2,2 kW
located in 97447 Gerolzhofen
sale in current condition as seen
Without repair work. Pickup at short notice.
- free on truck -
Feed: hand wheel or electromotroic
Year of production: 1988
Cutting length: 3050 mm
Cutting height: 65 mm
Millling unit: yes
Diameter of saw blade: 160 mm
Depth of back gauge: 500/730 mm
Sawing motor: 2,2 kW
Milling motor: 1,1 kW
Adjustable front support table: yes
Pneumatic pressure beam: yes
Rear table: yes
Back gauge: yes
Power consumption: 3.3 kW
Ndhz9
I sell the veneer cutting saw with scoring blade SCHEER FM-10 4200.
Automatic cut, length max. 4200mm
Cem0j9pq
Top pressure for material. Suitable for veneer and lamellas fine cutting.
Available immediately.
CATALOG NUMBER 5811
TECHNICAL DATA
- cutting length 3100mm
- max cutting height 40mm
- max cutting width 600mm
- max diameter of the disc 180mm
- max diameter of the cutter 180mm
- smooth regulation of the feed speed
- total power 2.2kW
- front table
- rear table
- diameter of the extraction connector 60mm
- pneumatic pressure
- dimensions length / width / height 4500x1500x1400mm
- weight about 1000 kg
ADVANTAGES
- Italian production
- saw with undercutter (with cutter)
- very good condition
...
with großer cut length 3500 mm
used, good condition
manufactured by Mayer
type FSK
built in 1985 ca.
motor 2,2 kW
cut length 3500 mm
saw blade diameter ca. 180 mm
pneumatic clamping
rip fence with hand wheel adjustable
front extented table
Ok8hn
rear extented table
veneer strip fence with stop finger
exhaust duct
pneumatic service unit
exhaust connection D 100 mm
required space ca. l x w x h mm
4400 x 1200 x 1300
weight ca. 600 kg
total connected power ca. 2,2 kW
located in 97447 Gerolzhofen
...
Cutting lenght 3100 mm
Cutting high 45 mm
98h8rhs9d
Sawblade diametre 300mm
Motor power 3 kW
Blade speed 4000 rot/min
Air pression 6 bar
Weight 1100 kg
used, good condition
manufactured by Scheer
type FM 5/ 3100 F
GS-approved
motor 2,5 PS
cut length 3100 mm
pneumatic clamping
rip fence
front extented table
rear extented table
veneer strip fence with stop finger
self-exhaust
required space ca. 3800 mm x 1500 mm x 1200 mm
Bn0qwaqaor
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without guarantee and warranty
+ with automatic feeding
+ intuitive operation via Touchscreen
+ saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on
two high precision ball-rail-systems
+ milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on
M9ejmoeww
two high precision ball-rail-systems
+ cutting and milling height 45 mm
+ saw- and milling unit can be
lifted and lowered pneumatically
+ front support table pneumatically adjustable - width of support: 230 mm
+ guiding of the saw- and millingun...
with joining planing aggregate
used, viel equipment
manufactured by Langzauner
type LZ 2-S/3500
built in 1991
Füge- veneer- and Plattenschneidmaschine in Kombinations-
ausführung Sägen-Fräsen
Schweright hand, massive basic machine with saw- and milling aggregate,
Anlifting and Absenken der beiden Werkzeugstationen about
Tastenbetätigung,
Betriebsarten-selector switch with automatic,
Bn0s02puby
tool cart in gehärteten and geschliffenen Kugelumlaufbüchsen
geführt,
feed speed about gear infinit...
used, good condition
manufactured by Scheer
type FM2-3000
Masch.-No. 124276
Fq3daeb
motor 1,6 kW
saw blade diameter ca. 180 mm
hand wheel clamping
rear extented table 3000 x 600
required space ca. 3500 mm x 1100 mm x 1400 mm
weight ca. 400 kg
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without revision,
without guarantee and warranty
used
manufactured by Scheer
type FM 3
Masch.-No. 121169
motor 1,65 kW
cut length 3000 mm
saw blade diameter ca. 180 mm max.
hand wheel clamping
rear extented table
self-exhaust
exhaust connection D 130 mm x 100 mm, Sack fehlt
required space ca. 3600 mm x 1100 mm x 1500 mm
total connected power ca. 2,02 kW
located in 97447 Gerolzhofen, free on truck, unverpackt
Bn0tahezkk
sale in current condition as seen,
without revision,
without guarantee and Gewährleistung
used, good condition
manufactured by Scheer
type FM 8-3100
built in 1983
Masch.-No. 82248
GS-approved
front extented table
rear extented table
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
Bn0kfwkd3w
without revision
without guarantee and warranty
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.