Used Bezel-Moving, for sale (2,227)

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Hjdpfx Aneg Icfpsdenu Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, table length 2000 mm table width 1000 mm Hnodsgp Dymjpfx Andeu table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Hodeh Dqb Djpfx Andsnu Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm Hnodpfx Aerfd Thendou connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm Hnedpjlc R Rxefx Andeu opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm dayligth max. 990 mm 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Hsdpjupxc Tsfx Andsnu Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm Hnodpjupxrhjfx Andsu bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: used, pressure 75 t stroke 250 mm Hnsdpfx Asupxr Uendou daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm Hodpfxsupxuce Andonu turning speeds 70 - 2000 U/min centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs Hsdsfg E H Sopfx Andonu * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Hedpjfg E H Tsfx Andjnu Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, weight max. in kg 1200 kg fork length 1150 mm Hsdpfx Aofgyhnendsnu stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m SPECIAL PRICE!!! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Condition: used, This listing is for a Integra VIAFLO 96 Electronic Pipette The unit is in full working condition and is ready for immediate release. The Integra VIAFLO 96 is an innovative 96-channel electronic pipette designed to enhance productivity in high-throughput laboratories. With its ergonomic design and advanced technology, it allows for efficient and accurate liquid handling, making it an essential tool for any researcher. Hnsdpfx Ansxxx S Todsu Key Features: - Intuitive Handheld Operation: The pipetting system ensures rapid, controllable, and reproducible handling of cell cultures. The VIAFLO 96 and VIAFLO 384 are designed for seamless integration on any lab bench, with a unique operating concept that makes them as easy to use as traditional handheld pipettes. Simply hold the control unit and push to move the pipetting head to the desired position, thanks to the servo-assisted steering mechanism that allows for fast and precise multichannel pipetting without complex programming. - User-Friendly Interface: Simple, intuitive controls with a high-resolution color display facilitate easy switching between protocols and adjustments on the fly. - Customizable Pipetting Modes: Choose from various pipetting modes, including standard, reverse, and serial dilutions, providing flexibility for diverse experimental designs. - Ergonomic Design: Lightweight and well-balanced to minimize strain during prolonged use, enhancing user comfort and efficiency. - Rechargeable Battery: Long-lasting battery supports more than 1,000 pipetting cycles per charge, ensuring uninterrupted productivity. - Robust Software Integration: Compatible with VIAFLO ASSIST software for easy programming of complex pipetting protocols, ensuring reproducibility and accuracy in your experiments. - Applications: - High-Throughput Screening: Ideal for compound screening, assay development, and applications requiring rapid sample processing. - Molecular Biology: Perfect for PCR setup, ELISA preparation, and other workflows demanding precision and efficiency. - Cell Culture: Streamline media preparation and cell plating with reliable volume accuracy.

Condition: used, This listing is for a Medite A550 Rotary Microtome Hnodpfoxzgv Ejx Andsu Developed and manufactured by experts in Germany The fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput. The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable. The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck Hnodpfevu Hanjx Andou - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Hnodpjwbdv Ssfx Andju Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Hsdpfx Aneu Hf Ryedsnu Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Hnsdpfex Exmtox Andju Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Hjdezgwbcspfx Andonu Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Hnsdpfx Anjzyn Igodeu Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment Hnjdezypawspfx Andju • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON04, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Hnodpsz Ipirefx Andsu Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 84 mm, clearance between the columns: 910 mm, displacement volume: 2,050 cm³, injection pressure: 1,620 bar, injection weight: 1,886 g, mold height (min.): 350 mm, ejector force: 110 N, ejector stroke: 250 mm, plate width: 1,260 mm, plate height: 1,270 mm, total length: 7,200 mm, total width: 2,150 mm, total height: 2,230 mm, overall weight: 17,210 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 183 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN500D1-3330 D=84 Clamping force 500T Tie bar spacing 910x830 Tool installation height 350 to 900 Robot interfaces Euromap 67, Euromap 13 Hnjdpfx Anoz I T E Dedeu Suitable robot available upon request Basic standard equipment: • CE standard • KEBA-3018 control system • Thermal insulation cover for the cylinder • Energy meter, intelligent version • 2 sets of core pull • 1 set of air blow device on the moving platen • 1 set of air blow device on the stationary platen • EUROMAP-67 interface • IT system • EUROMAP-13 core pull interface on the stationary platen • EUROMAP-13 core pull interface on the moving platen • 1 set of 6-way water distributor for the moving platen (11 l/min) • 1 set of 6-way water distributor for the stationary platen (11 l/min)

Condition: used, mileage: 362,558 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort Cab: Globetrotter safety cab FH (High Sleeper Cab, height 215 cm, length 205 cm) * Living Package: One bed, fold-down lower bunk (2000x815/740/660 mm) with safety net, pocket spring mattress * Air conditioning: Automatic temperature control with sun sensor Hnodsztih Iepfx Andou * Auxiliary heater: Cab, 2 kW * Cool box: 33 liters with freezer compartment under the bunk * Interior: Seats in fabric (blue/dark blue), interior in gray fabric, armrests with vinyl, two armrests on the driver's seat * Driver's seat: Comfort, air-suspended, heated, seatbelt integrated * Passenger seat: Standard, non-suspended * Curtains: On windshield and windows * Storage compartments: Above the bunk (245 liters), storage space under the bunk * Vanity/shaving mirror * Shift console (luxury) on the bunk: Controls for lights, heating/air conditioning, sunroof, door, alarm clock, windows, and radio * Writing board for the steering wheel ----Infotainment & Connectivity Instruments: Digital 12'' driver information display * Second 9'' touchscreen color display * Audio: Multi-format, 8 speakers, tweeters, AM/FM, USB port (3-way) * Navigation: Info and media package with navigation, map region Europe * Instruments High: Digital 12'' driver information display, traffic sign recognition (in conjunction with LSS-DW), chrome bezel * Telematics: Telematics gateway with 4G * Various software services (e.g., Alexa Built-In, Android Auto, TomTom Navigation App) * Immobilizer: Transponder in the key * Central locking with remote control * Tachograph: Digital, Generation 2 ----Driver Assistance: * Lane keeping assistant * Collision warning with emergency braking function * Camera monitoring of the passenger side at the front * Traffic sign recognition * Brakes: Disc brakes * EBS (Electronic Braking System), ABS * ESP (Electronic Stability Program) ----Lights & Visibility: * LED headlights with adaptive high beams * Automatic light switching between daytime running lights and low beams via light sensor * Static LED cornering lights * Daytime running lights LED, "V-Light" * LED fog lights * LED taillights * Headlight cleaning system * Rain sensor * Light and visibility package Superplus * Two work lights at the rear top of the cab, LED * Mirrors, heated and electrically adjustable with close-range camera on the passenger side * Exterior sun visors * Aluminum rims Dura-Bright EVO, chrome rings ----Engine, Transmission & Technology Engine: Diesel engine D13K500, 12.8 l, 510 hp / 375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter, and exhaust gas recirculation * Engine brake, exhaust pressure regulator (incl. engine control for I-Shift) * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * PTO PTR-FH (fast), transmission-side, connection: 1 SAE flange at the rear (600 NM) * PTO functions for I-Shift, basic * Compact retarder, transmission-mounted (rear) with medium oil, braking power: 450 kW * Suspension: Air suspension at the rear, parabolic suspension at the front, electronic level control * Differential lock, rear axle ----Exterior & Structure Fifth wheel coupling: Jost JSK 37, fifth wheel coupling height 150 mm + substructure, central lubrication * Extension element for work platform * GHH Rand CS 700 Light R-PTO L compressor ----* Tire dimension front axle: 315/80R22,5 * Tire dimension rear axle: 315/80R22,5 * Fuel tank: 650 liters * AdBlue tank: 100 liters * Technical total weight: 21,000 kg * Tare weight: 7,882 kg * Wheelbase: 3,800 mm * Inspection

Condition: good (used), fuel type: diesel, lifting height: 25,000 mm, Year of construction: 2016, operating hours: 7,136 h, Year of manufacture: 2016 Empty weight: 14.600 kg Hnsdsz I I Uaepfx Andju Carrying capacity: 4.000 kg GVW: 18.600 kg Lifting capacity: 4.000 kg CE mark: yes Technical condition: good Visual appearance: very good Manitou MRT 2540+ | Year 2016 | 7,136 hours | Radio Remote Control | Forks Powerful Manitou MRT 2540+ from 2016, with 7,136 operating hours, equipped with forks and radio remote control. A versatile rotating telehandler with a lifting height of approximately 25 metres and a maximum lifting capacity of 4,000 kg. The MRT 2540+ is designed for demanding and versatile applications, combining excellent reach with the flexibility of a rotating telehandler. Thanks to its 360° continuous rotation, materials can be lifted and positioned without constantly repositioning the entire machine. The radio remote control allows the machine to be operated remotely, providing additional flexibility for various applications. Together with the forks, the machine is ready for lifting and moving materials. With its impressive lifting height and lifting capacity, this MRT 2540+ is ideally suited for construction, assembly, industrial applications and material handling. Specifications: Make/type: Manitou MRT 2540+ Year: 2016 Hours: 7,136 Rotating telehandler Lifting height: approx. 25 metres Lifting capacity: 4,000 kg 360° continuous rotation Radio remote control Forks 4 hydraulic stabilisers Suitable for construction, industry, assembly and material handling A powerful Manitou MRT 2540+ with 7,136 hours, equipped with forks and radio remote control. The combination of 25-metre lifting height, 4-tonne capacity and 360° rotation makes this a highly versatile machine. Call us directly for more information or to arrange a viewing!