Used Bierrebi Lea Srl. Ta 103 Lea 1011 2.028.01.067.01 for sale (15,753)

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Ijdpfx Aeyln D Tscfjti

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Itjdpoxcx Amefx Acfei

Year of construction: 2025, condition: like new (used), Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus when it is undesirable for larger stones to be present in significant quantities in the screened material. The mixing of compost, sand, or substrate in a supplementary pass while screening with a Terra-Star also works excellently. This way, dirt is turned into new money! Disc spacing: 10 mm. Screen size: 0-15/20 mm. Itjdpeyfwd Njfx Acfei Fitted with an OQ45-5 quick coupler, which can be replaced or purchased for €1,890. For excavators from 6 t For wheel loaders from 4 t Throughput: 18-23 m³/h Leak oil connection required: 2 Series: TSE.103.569

Condition: new, functionality: fully functional, machine/vehicle number: ST2100-001, overall weight: 450 kg, Year of construction: 2021, STEMA GLF Dowel Shooter Automatic Certainly the most productive dowel inserting machine for heavy and long dowels. Isdpfoxhv A Isx Acfjti Pre-installed for dowels, 80 x 8 mm, as commonly used in window manufacturing. Please refer to the detailed description in the attached PDF. The machine is available for demonstration in our showroom and ready for operation.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems Itodpfxoygh I Ue Acfsi The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Machine body, internal pipe system, control cabinet and washing basket made of stainless steel - electronically controlled basket drive - level control - lid locking - removable filter plate - weekly timer function Oil skimmer model WE AM version for additional manual cleaning - lid with viewing window, lighting, and sleeve gloves - low-pressure pump, 3-6 bar, with brush washing system and hand spray gun - blow-off gun, compressed air High-pressure unit, 160 bar, for Isdpfxsf A Nquo Acfjti AM version permanently installed on the machine side.

Condition: as good as new (ex-display), Year of construction: 2026, -Usable internal dimensions: D=900mm H=580mm (other sizes available upon request) Itsdef A D Itopfx Acfsi -Spraying pressure: 3.2 Bar -Basket load: 200kg -Tank volume: 130L -Standard accessories: • Oil skimmer • Pumping device • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Basket made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Year of construction: 2004, condition: used, functionality: unexamined, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used to coat various materials. Itjdpfjv Izr Eex Acfsi It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Electric power supply: 480 V 60 Hz Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW HOIST CONTAINER SQUARE TANK REAR OPENING DOOR AND TILTING WITH 200 MM BEAMS AND SUPPORTED FLOOR, 0.60 MT HOOK, LARGER WHEELS AND REINFORCEMENT IN THE CENTRAL EXTERNAL PART OF THE CENTERLINE PLUS REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT REF: 24-N-09 Isdpfxjvucm Rj Acfoti TYPE: for aggregates C NEW: yes LID: no OPENING: rear door and tilt OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m + 0.20 m EXTERNAL WIDTH OF THE BODY: 2.55 m INTERNAL / EXTERNAL FRONT SIDE : 1.30 m / 1.50 m INTERIOR / EXTERIOR REAR TAILGATE : 1.30 m / 1.50 m INTERIOR / EXTERIOR SIDE TAILGATE : 1.30 m / 1.50 m MC : 18 WEIGHT: 2510 kg BOTTOM FROM: 5 mm WALL FROM: 4 mm COLOR : grey ral 7000The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, functionality: fully functional, machine/vehicle number: div., For Sale: • 1x Kuris Pionier, spreading machine including spreading table, automatic servo-cutter, and band knife. Set price: €6,750 (disassembly by the buyer) Itodpfx Acowpww Esfei • 1x Kuris Pionier, spreading machine including spreading table and band knife. Set price: €5,750 (disassembly by the buyer) 1x Bierrebi cutting machine, including blade preparation table. Price: €4,950

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water Iodpfx Aceyxgppofoti 2nd and 3rd stage: rinsing with cold water workpiece passage height 2100 mm, depth 800 mm

Year of construction: 2010, condition: used, Imperia D (85 x 105 cm), year of manufacture 2010, CE 2010 Iodpfx Acjxa Epnjfoti Machine reinforced at connecting rods Micrometric pressure adjustment Weight: 6,000 kg Mechanical speed: 1,200 sheets/hour Machine inspected by manufacturer, safety devices optimized With hardened cutting plate Self-centering universal frame Operator arm with control panel Refurbished pneumatic brake-clutch system Delivery time: 60 days Price: on request Warranty: 3 months

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. Itjdpjyg Eghjfx Acfsi The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 161625, total width: 2,450 mm, total length: 7,400 mm, total height: 3,000 mm, maximum load weight: 100 kg, heating capacity: 32 kW (43.51 HP), tank capacity: 280 l, warranty duration: 12 months, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2024, Equipment: CE marking, Ultrasonic automatic cleaning plant with versatile cycle: Charge by operator Isdjxlhvnspfx Acfsti Precleaning tank Ultrasonic cleaning Rinsing in cold water Ultrasonic cleaning Rinsing in cold water Protection in demi warm water Drying in hot air

Condition: like new (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 100925, total width: 900 mm, total length: 1,600 mm, total height: 1,900 mm, maximum load weight: 200 kg, heating capacity: 12 kW (16.32 HP), tank capacity: 600 l, warranty duration: 12 months, type of input current: three-phase, inner dimension height: 500 mm, inner dimension length: 1,200 mm, inner dimension width: 600 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, power: 12 kW (16.32 HP), operating pressure: 6 bar, Equipment: CE marking, documentation/manual, Ultrasonic cleaning machine with a pneumatic platform Pieces to be cleaned besides ultrasonic action are continuously moved up/down so that to increase the result All controls for safety working are automatized by PLC Maximal insulation and insonorization against ultrasonic noise Itjdpfx Acoxxvk Tjfji Usefull platform dimensions: mm. 1.200 x 600, maximal piece height: mm. 500 Full stainless steel AISI 304

Condition: like new (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 100925, total width: 900 mm, total length: 1,600 mm, total height: 1,900 mm, maximum load weight: 200 kg, heating capacity: 12 kW (16.32 HP), tank capacity: 600 l, warranty duration: 12 months, type of input current: three-phase, inner dimension height: 500 mm, inner dimension length: 1,200 mm, inner dimension width: 600 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, power: 12 kW (16.32 HP), operating pressure: 6 bar, Equipment: CE marking, documentation/manual, Ultrasonic cleaning machine with a pneumatic platform Pieces to be cleaned besides ultrasonic action are continuously moved up/down so that to increase the result All controls for safety working are automatized by PLC Maximal insulation and insonorization against ultrasonic noise Itjdpfx Aoxmhckjcfei Usefull platform dimensions: mm. 1.200 x 600, maximal piece height: mm. 500 Full stainless steel AISI 304

Condition: new, Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 281225, total width: 900 mm, total length: 4,500 mm, total height: 2,500 mm, heating capacity: 12 kW (16.32 HP), warranty duration: 12 months, type of input current: three-phase, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, compressed air connection: 6 bar, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, Robotic multi-stage ultrasonic washing machine Useful internal tank dimensions: mm 600 x 500 x 350h Usable tank capacity: 100 liters Itodpfx Ajxv U Ifecfji Supplied baskets: mm 550x400x280h Ultrasonic power: 3000 watts Ultrasonic frequency: 33 kHz PZT elements: 32 Heating: 16 kW (4+4+4+4) Voltage: 380V, three-phase, 50 Hz Power consumption: 14A Load per basket: 8 kg PLC for detergent liquid level, temperature and ultrasonic power control Full noise insulation Insulation with volcanic rock wool Entire construction in AISI 304 stainless steel Tank sheet thickness: 2 mm (20/10) WORK CYCLE - Loading of baskets onto motorized platform - Pre-wash with hot detergent - Washing with ULTRASOUND - Rinsing with hot running water - Washing with ULTRASOUND - Rinsing with hot running water - Protection in special cold or hot liquid - Drying with heated and ventilated air - Unloading of basket onto motorized platform

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Isdpfxoyf Ebio Acfjti

Condition: used, Year of construction: 2002, machine/vehicle number: 19711, functionality: fully functional, power: 4.5 kW (6.12 HP), cutting height (max.): 2,200 mm, saw blade diameter: 294 mm, overall weight: 1,050 kg, cutting length (max.): 5,300 mm, collet bore: 30 mm, The vertical panel saw features a solid and compact structure to ensure stability during operation. This configuration allows for consistently high cutting quality, even on large or particularly challenging materials, delivering smooth and linear movements for safe and efficient work. Itsdpfx Aswqmyrscfsi The machine is supplied with 29 blades, each with 50% remaining service life. Transport not included.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For sale: Industrial, fully automated cross-cut saw for trimming packages of lumber and structural components — a complete processing line for formatting bundles to a specified length. The machine is designed for use in sawmills and timber structure manufacturing plants, where process efficiency, precise length repeatability, and bundle stabilization during cutting are critical. The machine is available immediately — inspection and testing possible. Working parameters: • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section is determined by the extreme positions of the hydraulic clamps — cutting of smaller bundles is permissible. Cutting module: • Main motor: 11 kW • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic lubrication system for the guide bar The robust construction of the cutting unit ensures operational stability and precise cutting length repeatability. Bundle stabilization: • 6-point hydraulic clamping system (top + side + before and after the cutting line) • Bundle alignment to vertical rollers • Elimination of bundle movement as the saw enters Process automation: • Intelligent bundle strapping system • Automatic determination of strapping points • Possibility of automatic base cutting • Discharge buffer for cut bundles Conveying and handling: • Cross infeed conveyor • Cross outfeed conveyor Itsdpfxsxn Rt Ue Acfsi • Automatic discharge of bundles after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilt rollers in the cutting module (prevents jamming of large waste pieces) Automation: • Siemens PLC controller • Yaskawa servodrive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included The machine is available immediately.

Condition: new, Year of construction: 2026, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Itedpfx Aex Urucscfoi Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2026, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Iodjlz S Rbopfx Acfsti Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH Ijdpfx Acshpbu Rofeti UNBEATABLE PRICE

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW HOOK-AND-LOAD CONTAINER WITH SQUARE BODY, REAR OPENING WITH UPWARDS AND DOWNWARDS TILTING (LOADING RAMP FUNCTION) WITH 200 MM BEAMS AND SUPPORTED FLOOR, 0.60 MT HOOK, LARGER WHEELS AND REINFORCEMENT IN THE CENTRAL EXTERNAL PART OF THE CENTERLINE PLUS REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT REF: 24-N-43 Iodpfx Acovvdblsfsti TYPE: for aggregates C NEW: yes LID: no OPENING: rear ramp and tilt OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m + 0.20 m INTERNAL / EXTERNAL WIDTH OF THE BODY : 2.35 m / 2.55 m INTERIOR / EXTERIOR FRONT SIDEBOARD : 1.50 m / 1.70 m INTERIOR / EXTERIOR REAR SIDEBOARD : 0.80 m / 1.00 m INTERIOR / EXTERIOR SIDEBOARD : 0.60 m / 0.80 m MC : 9 WEIGHT: 2220 BOTTOM OF: 5 mm WALL OF: 4 mm COLOUR : green ral 6029Errors and/or omissions excepted The prices shown do not include VAT. Please contact the sales team for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: like new (used), Device like new Iodpfsx E Sm Hex Acfjti The new Discovery Hybrid Rheometer (DHR) series represents the latest technological advancements from the global leader in rheology. It combines a patented advanced drag cup motor, second-generation magnetic bearing, Force Rebalance Transducer (FRT), and a new, patent-pending True Position Sensor (TPS) in a single-head hybrid rheometer. DHR offers unprecedented performance and delivers unmatched precision for direct strain control, direct stress control, and normal force measurement. DHR includes all the popular TA innovations, such as patented Smart Swap geometries and the widest range of commercially available temperature systems and Smart Swap accessories. The result is the most advanced and versatile rheometer platform imaginable. The HR-1 model is a robust, precise, and field-proven rheometer. HR-1 utilizes state-of-the-art Discovery Hybrid Rheometer technology in a platform ideal for production control, asphalt manufacturing, and a wide range of general viscosity and viscoelasticity measurements.