Used Bio Extruder for sale (655)

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing - Control system Gisdpju Hik Defx Anlou

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Gijdpfx Ansy Nk S Nelou Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2025, The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. Giodsh S Undjpfx Anlou The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Giedpehlvm Nefx Anlsu

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Gisdpfoifgwhex Anlou Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 Godpfx Anjifgwleloiu D-26345 Bockhorn/Grabstede Germany

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Gsdpjk Nn Dzjfx Anlsiu Germany

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg Godpfxen Utt He Anljiu This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Gedpfoxw Tumex Anljiu Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Godpjbqt Arjfx Anlsiu

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Godsvfd Uqopfx Anloiu The extruder is fully functional

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Gijdpfxsumubys Anlou Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Gjdpfxjv Uz Awj Anleiu

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Godsxq Exqopfx Anloiu

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Gijdpfxjvw Aqhs Anlju

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Gijdpexn S Umjfx Anlou

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Giodpfx Asx Hifvenlsu

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Gijdpfovuquvox Anlou

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Compact design, one shared control cabinet, approx. 800 kg/h Gisdpeyilykefx Anlsu

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 heating zones in the barrel + 2 heating zones in the die head, designed for universal use with a nitrided plasticizing system. - Plasticizing unit fi 25 mm, nitrided - Barrier screw with mixing tip (for hard PVC) - Output torque on screw 636 Nm - maximum screw speed 80 rpm - Screw start interlock to prevent underheating - Barrel equipped with feed zone cooling (liquid cooled) - 3 barrel temperature control zones - Heating-cooling set (band heaters, cooling fan) - Lenze gearmotor with 5.5 kW motor - hopper - Stepless speed control via potentiometer and inverter - Temperature control with Omron controllers for full monitoring - Heater current measurement - heater burnout protection Gisdpfx Asxtf Hgonleu - PID heating tuning function - type J thermocouples - Die head with 2 heating zones, no cooling

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Giedpohtvmhsfx Anlsu

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Giodpohz Dyaefx Anleu

Year of construction: 2023, condition: new, 3 single-screw polyethylene profiles Gisdpfx Asy Sxmgjnlju

Year of construction: 2023, condition: new, functionality: fully functional, 3 UNITS JWELL - 65 TWIN-SCREW CONICAL EXTRUDER Gjdpfey Sxizex Anloiu

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine Gedpfsuhpiyex Anlsiu