Used Bruderer High Speed Automatic Press for sale (62,633)

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 Kdedpfxozpfy Ss Aqqer -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Kedpfx Aqjzuzw Deqodr Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: good (used), Donau Danuflex-128 High-Speed ​​Radial Drilling Machine A manual high-speed radial drilling machine from the renowned German manufacturer DONAU Werkzeugmaschinen. This class of machine is characterized by an extremely flexible, smooth-moving swivel system and is primarily used in tool and fixture making, as well as in single-part and small-batch production. Technical Specifications Tool holder: MT4 (Morse Taper 4) Clamping table: 500 x 1055 mm Maximum reach: 1120 mm Spindle stroke: 160 mm Column diameter: Ø 150 mm Speed ​​range: 45 – 2240 rpm (electrically selectable steps) Feed range: 0.075 – 0.3 mm/rev Motor power: 1.5 / 2.2 kW Total weight: approx. 1,800 kg Additional equipment: Integrated thread-cutting unit "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Kedpszni T Hsfx Aqqedr You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Kdodpfezab Ibex Aqqjr Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: good (used), Donau DR 40 Z High-Speed ​​Radial Drilling Machine The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine designed for trade and industrial applications. It is characterized by its high flexibility and a swiveling, extendable arm, enabling fast and precise machining of workpieces. Technical Specifications Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Tapping capacity: Max. M33 in steel and M45 in cast iron. Tool holder: MT 4 (Morse Taper 4). Spindle stroke: 200 mm. Reach: Variable from 320 mm to 1140 mm. Workpiece height: Max. approx. 700 mm. Table size: 1200 x 750 mm. Speed ​​range: 45 to 2240 rpm. Feed rate: 0.075 to 0.6 m/min. Drive power: Approx. 6 kW. Weight: Approx. 1.8 to 2.0 tonnes. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! Kdsdpoznkd Tofx Aqqer International shipping costs available upon request!

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM Kdsdpfx Aqoyxy D Tsqsr - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), Elopak carton machine, stated by manufacturer to run at up to 12,000 cartons per hour. Built in 1997 but totally rebuilt by manufacturer in approx 2004 and used for less than two years. Kdjdpfx Aspivdisqqor

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet Kdjdpfx Ajvq Rtkeqqor - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Kedpfx Aqoxfqyveqodr

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Colour: Blue Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Kedpfx Aqoztxnkoqjdr

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Kdodpfx Aonmv Raeqqer

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Kedpszuarmefx Aqqsdr Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Table area: 3,000 x 1,400 mm Kjdpfx Ajzui Haoqqedr Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2009, operating hours: 2,200 h, functionality: fully functional, total width: 2,550 mm, total length: 8,650 mm, pressure: 150 bar, operating pressure: 150 bar, type of input current: DC, fuel: diesel, overall weight: 27,000 kg, empty load weight: 14,555 kg, temperature: 60 °C, fuel tank capacity: 700 l, type of cooling: water, Equipment: crane, rotational speed infinitely variable, type plate available, An authorized SUBARU dealer has a special vehicle for sale that was used for cleaning tunnels and high facades in Sweden. It was also used for high-pressure cleaning of highways and roads. It is equipped with a water cannon that can be controlled from the cab. Additionally, a power generator is installed on the vehicle body. It has a tow hitch that could, for example, be used to pull a sweeper or brushes for road cleaning, or similar equipment for maintaining road cleanliness. The Mercedes was purchased from a municipal company and was regularly serviced. We can manufacture dedicated cleaning nozzles for, for example, cleaning roads or walls. The body was manufactured by "MEC TEC AS" and features highly efficient pumps for water cleaning, up to 300 liters per minute! It also includes a power generator to power the body. It has a 11,500-liter water tank and a 500-liter tank for chemicals. The engine compartment is located at the rear of the body and contains: - Diesel engine - Large, high-pressure water pump connected to the diesel engine via a clutch - Hydraulic pump connected to the diesel engine at the front, which drives: - Small high-pressure pump for water used for cleaning vehicles and technical installations - In addition, there is a lance for remote cleaning Kedjzvnipopfx Aqqjdr - Chemical pump located in a separate cabinet at the rear on the right side - 3 diaphragm pumps located on the right side of the vehicle. - 2 hydraulic pumps connected to the distributor near the diesel engine, which drive: - Hydraulic radiator fan - Arm located on top of the vehicle - Water heating for the small high-pressure pump A tower is built above the cab and attached to an auxiliary frame. This tower forms the basis for the cleaning arm; we offer the possibility of manufacturing a dedicated nozzle for cleaning larger surfaces. The diesel tank for the body has a capacity of 700 liters. - Generator for generating power for external devices - Hydraulic oil tank - Hydraulic oil cooler Mass and dimensions: GVWR: 27,000 kg Unladen weight: 14,555 kg Payload: 12,445 kg GVWR of the combination: 71,000 kg On the drawbar (o.1): 44,000 kg External dimensions: Length: 865 cm Width: 255 cm Wheelbase: 3900/1350 mm Emission standard: EURO 6 Equipment: Body with water tank Cannon/Arm for "shooting" water Arm adjustment in the cab "ALLISON" automatic transmission Power generator Seating: 4 seats Reversing camera On-board computer Air conditioning Tachograph 3rd steerable and liftable axle Rear axle lock Air suspension front and rear Tow hitch/coupling Additional exterior lighting Orange lights Factory radio ABS Immobilizer Electric side window Electric mirrors Heated side mirrors Inspection report: The vehicle is technically and mechanically sound and arrived at our company from Sweden without any problems. It has been regularly serviced. The water cleaning system and pumps have been checked and are functioning properly. It is currently fitted with winter tires, size: 315/80R22.5, with approximately 70% tread remaining. The vehicle is, of course, accident-free and has a genuine mileage, verified by the authorized service center and the Swedish authorities. The stated price is net and applies to export and to companies. A significant discount may be possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: good (used), Kliklok Concorde K170 cartoner in nice condition. Has come from major UK food factory so has been very well maintained. Several change parts may be available with this machine. Kjdponmv N Sefx Aqqodr

Condition: like new (used), UNDER CONSTRUCTION We are currently in the final stages of a complete overhaul of a fully automatic stationary press. This stationary press is including 2 containers 30m3 equipped with side door Build in: RV 2025 Overhaul work we have carried out: -new floor -new side panel Kdodpsw Uc T Uefx Aqqor -new guide blocks and guide plates - pressblock overhauled -cylinders fitted with new sleeves -new fork pins -new return filter -new hydraulic hoses -oil renewed

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Ksdeda Ha Nopfx Aqqsdr Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Kdedpfx Asy Tx R Isqqjr

Condition: used, Year of construction: 2008, High-speed radial drilling machine Alzrapid 32 With MK4 tool holder Quill feed, Kedpfx Aszhbl Ujqqodr Thread cutting device, Operating manual.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Kedpfxsw D T Uij Aqqsdr Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m Kjdpfecxxycjx Aqqedr with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW Kdedpfx Ascxxu Neqqer weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Refurbished BRUDERER Stamping Press BSTA250-75B incl. new PCS-100 Press Control Technical Specifications Pressing force: 250 kN Tool area (L-R x F-B): 750 x 530 mm Adjustable stroke lengths: 13, 16, 19, 25, 32, 38, 44, 47 mm Speeds: 13 mm stroke: 1,500 spm 16 mm stroke: 1,350 spm 19 mm stroke: 1,240 spm 25 mm stroke: 1,075 spm 32 mm stroke: 950 spm 38 mm stroke: 810 spm 44 mm stroke: 700 spm 47 mm stroke: 650 spm Power supply: 76 kVA Servo motor rating: 47 kW Kdodpfxeyb Etqs Aqqsr Shut height: 175.5 - 239 mm (stroke-dependent) Slide adjustment: 51 mm Strip feed width: 210 mm Strip feed height: 50 – 120 mm Additional Information · Completely refurbished eccentric high-speed press · Highly dynamic, adjustable stroke design · Equipped with modern, high-performance modular PCS-100 press control · Energy-efficient drive technology for reduced CO₂ emissions · Industry 4.0 ready via OPC-UA interface · Integrated tool monitoring · Integrated servo feed system

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,947 h, functionality: fully functional, machine/vehicle number: 1381, overall weight: 18,920 kg, year of last overhaul: 2026, We offer this Doppstadt AK 560 ECO Power high-speed shredder, which has been fully refurbished and brought back to perfect working order by the dealer. It was first put into service in 2020. Features include: - 6m rear conveyor - Overhauled shredding chamber, new rotor - New hammers - New hopper and roof plates - Equipped with two screens - Complete engine overhaul - New flexible coupling - Up-to-date technical inspection Kedpoy Tbcgjfx Aqqjdr A list of work carried out is available upon request. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Kjdpfxey Sazfs Aqqodr Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.