Used Mk2 for sale (196)

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Ksdpfxezvybwo Acpedu

Year of construction: 2017, operating hours: 1,000 h, condition: used, functionality: fully functional, Probat Probatone 5 MK2, manufactured in 2017. The machine was ordered from Probat in 2017, installed in 2018, and used in production until the summer of 2024. It comes with an optional drum speed control and a pilot roasting system (for automatic roasting). A temperature probe for measuring exhaust temperature is also included, which works with a USB stick and a third-party plug-in. Both bean and exhaust temperatures can be viewed in software such as Artisan. Kdodpfez E Rfijx Acpeu The machine has been cleaned and serviced according to the Probat maintenance schedule. After being removed from production, the machine was fully cleaned and serviced, including disassembly and cleaning of the cyclone, lubrication of the bearings, and cleaning of the electrode. Important: The machine has less than 1000 production hours, as indicated on the screen counter. After being removed from production, the machine was used for a few test runs in the summer of 2025. It is in full working condition but has a few scratches on the paint, as shown in the pictures. It is possible to test the machine on-site, and assistance can be provided with transport arrangements.

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. Kodpsxv Affofx Acpodu The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Kdjdpfx Acjzmtqaspou Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Ksdezwh Hwspfx Acpjdu Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: excellent (used), Lot of HSS Twist Drills; Design: HSS; tip drill – steel drill; 118° point angle, drilling depth. Morse taper shank, depending on diameter: MT2, MT3, MT4. Spiral angle 30°. Diameters: see "Pictures" / table. "Dimensions ø" / "Flute length mm" / Total length MT2 ø21.0 120/220mm ___G10 01 → € MT2 ø22.0 90/170mm ___G15 02 → € MT2 ø22.5 150/250mm ___G10 03 → € MT3 ø26.5 150/275mm ___G15 04 → € MT3 ø28.0 150/275mm ___G15 05 → € MT3 ø31.0 150/275mm ___G15 06 → € MT4 ø34.0 150/300mm ___G15 07 → € MT4 ø36.0 160/310mm ___G15 08 → € MT4 ø39.0 130/270mm ___G15 09 → € The G10–G15 numbers are internal references. Package price: on request More twist drills will be available soon in my other listings! You will receive an invoice, listed price = Net price incl. 19% VAT. Packaging & shipping within Germany €11.00 International shipping on request. If you have any questions, feel free to contact me: 0171/8082406 The original pictures are part of the item description. Please also check my other offers. Collection, shipping, bank transfer and PayPal possible. Kjdpfjy An Izjx Acpedu

Condition: used, Offer consist of: Calender production system -Rilecart R 800 -Rilecart R 422 Kodpfx Ajzru Scjcpedu -Rilecart FAR-5/55 MK2 -SETMASTER -Kugler All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Kdjdpoyym Hkofx Acpsu Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: excellent (used), Countersink, countersink, deburring countersink, pipe deburrer -Manufacturer: Rhinos, Countersink 90° MT Shank Mount MK2 -Blade diameter: Ø 50 mm -Outer chamfers: 25-44 mm -Internal machining range: 20-39 mm Kdjdpozp Hn Dofx Acpju -Dimensions: Ø 50 x 160 mm -Weight: 0.9 kg

Condition: used, Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm Kedpjfv Unvjfx Acpjdu -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Condition: good (used), functionality: fully functional, spindle speed (max.): 10,000 rpm, overall weight: 750 kg, Aciera multi-spindle drilling machine, 4x Type Aciera 13 consisting of: 3x drilling machines 1x tapping machine mounted on a common base. Drilling head adjustable in height. No. 1 + 2 with drill chuck taper No. 3 with quill MK2 No. 4 with drill chuck taper/tapping attachment Max. distance table to drill chuck: 340/530/450/320mm Spindle stroke 120mm Adjustable depth stop, with vernier scale 0.1mm Integrated machine light Overhang 200mm Table size: 360x1120mm 1x T-slot 10mm Ksdoz S U E Iepfx Acpodu Speed range machine-dependent 175 - 10,000 rpm Overall dimensions: 1200x800x1760mm Weight approx. 750kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Kdedpfx Acoz H T Dkepou Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete Kdjdpfoztwglsx Acpou -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Kdjdpfx Acoy E T Dajpou

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 161 kg, input voltage: 230 V, spindle speed (max.): 3,700 rpm, spindle mount: MK 2, input frequency: 50 Hz, Twister FU-200 lathe, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series production, and creative workshop projects. Key technical data: - Machine type: Lathe / Woodturning lathe - Center height: approx. 200 mm - Turning diameter: approx. 395 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm Kjdpfxozuyt Re Acpsdu - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock/spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory list - Rotatable and adjustable headstock for flexible machining - Attractive complete package for hobby woodturners, workshops, schools, and makerspaces No warranty

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting Kdodpfexcbhrex Acpeu - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: used, Thread cutting chuck, thread chuck, tapping chuck, thread cutting apparatus -Thread cutting chuck: Thread cutting device 2 pieces -Recording: MK2 Kodpfx Aeuh H Hpjcpsdu -Bore: 1x Ø14 mm / 1x Ø10 mm -Delivery/Price: complete -Transport dimensions: 163/87/H260 mm -Weight: 6.1 kg

Condition: excellent (used), mileage: 192,459 km, fuel type: diesel, color: orange, lifting height: 37,500 mm, mast type: telescopic, General Information Kdjdpfx Aouxqgwecpou Year of manufacture: 2008 Design year: 2008 Drivetrain Drive: Wheeled Functional Features Mast: Telescopic (3 sections) Mast length: 29 m Lifting capacity: 40,000 kg Superstructure brand: GROVE GMK 2035E + JIB CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request GROVE GMK 2035 E CRANE + JIB DRIVE 4X4X4 COUNTERWEIGHT 6 TONS CHASSIS: 192,459 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TIRES: 60% GOOD SIZE: 385/95/R25 UPPERCARRIAGE AIR CONDITIONING + HEATING 1 SHAVED WOOD BLOCK 1 WINCH MAXIMUM LIFTING CAPACITY: 40,000 KG MINIMUM / MAXIMUM JIB LENGTH 8.9 M / 29 M JIB: 8.5 M CENTRAL LUBRICATION SYSTEM REMOTE CONTROL ENGINE SUPERSTRUCTURE: MERCEDES-BENZ DRIVING SPEED 85 KM/H ALL DOCUMENTS AND PAPERS AVAILABLE CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW Kdjdpfx Aeyv Ahvecpju -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

Condition: ready for operation (used), H. Hartkämper Coordinate Drilling Machine Kjdoztc A Ejpfx Acpjdu -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel in X: approx. 350–450 mm -Travel in Y: approx. 180–250 mm -Base: integrated steel frame with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg Errors and omissions excepted.

Condition: used, Graphtec CUTTING PRO FC7000MK2-100 Kdjdpfx As Aaxtwocpju grit-rolling digital servo plotter for cutting foils, vinyl and other materials Cutting width: 100 cm Max speed: 148.5 m/min Knife pressure: 0.196-5.88 N / 20-600 gr Control panel with buttons for position, menu, test cut and etc. Compatible with software for cutting like Cutting Master Ports for PC connection Comes with stand and waste bag In very good working condition

Condition: good (used), loading space length: 7,250 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, color: red, General information Year of manufacture: 1997 Field of application: Construction Drivetrain Type of fuel: Hybrid Weights Empty weight: 1.980 kg Functional Lifting capacity: 200 kg Lift height: 1.400 cm Working height: 1.600 cm Ksdpezymhfsfx Acpodu CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1100 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-09-02 Production country: DK Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10110710, Technical characteristics: # Measurement capacity [mm]: Diameter 0.2 to 50 / Length 300 # Maximum workpiece size: Diameter 150 / Length 300 / Weight 10 Kg # Resolution: Diameter 0.1μm / Length 0.1μm / Rotation 0.018˚ # Precision: Diameter (2+D[mm]/100)μm / Length (5+L[mm]/100)μm # Repeatability: Diameter 0.5μm / Length 3μm Dimensions # Measuring system: 780*650*912 # Installation surface [m]: 0.8x0.8 # Weight: 145 Kg # Clamping type: Morse Taper MK2 / Travelling head tension length 20 mm Kdsdpfx Ajxxvpvocpou IT system: Windows XP Professional Electrical Equipment # Operating voltage: 230/115V # Connected load: 1.5 kVA / 16 A

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg Kdsdpfx Acozn Nm Topeu The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Reference: Turning at B.

Condition: good (used), loading space length: 8,700 mm, loading space width: 1,620 mm, loading space height: 2,100 mm, General information Year of manufacture: 1993 Field of application: Construction Drivetrain Type of fuel: Hybrid Weights Empty weight: 2.450 kg Kedpfxozy I U Hj Acpjdu Functional Lifting capacity: 200 kg Lift height: 2.300 cm Working height: 2.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1140 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-09-20 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information