Used Bwf Leveling Mounts / Fixators / Adjustable Feet for sale (33,180)

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit Kodjzzz R Djpfx Aa Rsdt - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. The equipment is disconnected from the power supply. Kedpfxjzvalpo Aa Rjdt Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Feed speed: Adjustable up to 30 m/min. Control panel: Separate control unit mounted on a mobile trolley.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: EB1206, total height: 1,800 mm, total length: 1,700 mm, total width: 2,600 mm, Proth PSGS-2550AH surface grinding machine. Like new. Never used!! Fully functional. Magnetic clamping plate: 500x250x80mm Max. workpiece weight: 320kg Travel distances: Longitudinal: 600mm Transverse: 280mm Spindle speed: 1500 RPM Hydraulic longitudinal feed: 1-25m/min Kodpfx Aajzcdy Ee Rsdt Transverse feed: 0.1-10m/min Automatic vertical adjustment, computer-controlled Weight: approx. 1350kg Electronic handwheel Demagnetization Cross-grinding attachment Coolant system Machine base made of high-quality MEEHANITE cast iron, stress-relieved multiple times, resulting in unique rigidity and smooth operation. Includes documentation, balancing device, grinding wheels and flanges, and leveling feet.

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Kdodpfx Aex Nb E Toa Ret Installation and mobility Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. * Transport possible via forklift or crane, weather-protected seals on all openings.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Kdodpfx Aozy Uy Nja Rjt Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm Kdjdpfx Aszy U Dbsa Rjt - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Kdodpoxq A Dwjfx Aa Rot Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC Kedsywuczspfx Aa Rjdt  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,568 h, functionality: fully functional, 4-axis Lathe – Universal | Brand: DMG MORI | Type: CTX alpha 500 V4 Year of manufacture: 2019 (Start-up: July 2029) (Version with Y-axis and driven tools) The machine can be inspected by appointment under power. Condition: Fully functional / ready for operation. Operating hours (week 34/2026): - Total operating hours: 12.641 h - Spindle hours: 2.605 h TECHNICAL SPECIFICATIONS / EQUIPMENT: - Turning diameter: 165 mm - Turning length: 500 mm - Main spindle as an integrated spindle motor, ISM 52 Synchro * Drive power (100/40% duty cycle): 13/14 kW * Speed range: 20 - 6.000 rpm - Partial hollow chuck (hydraulic) * Pull-tube internal diameter: 52 mm - C-axis and spindle brake (hydraulic) Kodpfjzvz Aiox Aa Rjdt - Y-axis for cross slide: +/- 40 mm, stroke: 80 mm - Tool turret: 12-position, brand: Sauter * Tool holder: VDI 30 mount, DIN 69880-30 * Driven tools * Connection/drive to DIN 5480 - Direct measuring system on the X-axis - Tailstock - CNC control: Siemens SINUMERIK 840D sl Operate * User interface: CELOS / ERGOline * Programming: ShopTurn 3G - Hollow spindle stop, adjustable, mounted at the rear on a hollow chucking device, Ø 66 mm (chuck-independent) * Belt filter system, filter fineness 40 µm * Level monitoring - Mechanical oil mist separator - Special version, operating mode BA4 “emery operation” - Coolant spray gun - Chip conveyor (hinged belt), incl. coolant tank and coolant pump, - Coolant system: 8 / 20 bar, * Coolant tank: approx. 600 l (selectable via M-function, with supply through the turret disc to the turret stations) - DMG MORI NETSERVICE - DMG MORI IoTconnector (enables DMG MORI’s online services) - DMG MORI Service Agent (controlled machine maintenance and servicing) - Bar machining package D65, consisting of: * D66 hydraulic hollow-bar clamping device * Workpiece retrieval device, with conveyor belt, conveying to the left for parts up to max. D65 x 185 mm in length, max. workpiece weight 3 kg - Documentation - CE marking Machine dimensions (L x W x H): approx. 3.843 x 2.580 x 1.825 (Height including attachment: approx. 2.415 mm) Available as an option: Milling attachments, - Collet chucks, - Jaw chucks, - Tools No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Ksdjz Dkftspfx Aa Redt Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide Kdedjtqdq Sjpfx Aa Rjt 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS coating machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed rate max. 140 m/min Upper pressure rollers with drive x 6 Pressure force adjustment via pneumatics Lower pressure rollers with drive x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste - Robust and efficient transport with 6 motor-driven pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of coating, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via no. 6 lower metal rollers and no. 6 upper rubber pressure wheels, variable with adjustable speed via an inverter. The upper pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the upper pressure wheels and corresponding independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels from the Italian company MAKOR, price €1,500 - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Weight: 280 kg Kodpfxoytc Rkj Aa Rodt 2. MAKOR ST/100 film slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel Kedsx R Umtspfx Aa Redt - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782. Kodpfezzvgajx Aa Redt

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Air suspension + 100 km/h Equipment: - Electrically lowerable - Approach angle 4° - Automatic regulation Net price: €10,752.10 / Gross price: €12,795.00 Article number: TMA235371500.01 Technical data: • Brand: Tohaco • Model: MA235/3715 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 370 x 150 x 10 cm • External dimensions (L x W x H): 506 x 208 x 95 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Tare weight: 674 kg • Payload: 2,826 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: VB air suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Hot-dip galvanized chassis • Very stable steel frame, welded • Rear end sloped Kodpfxjzy Dtrj Aa Redt • Very stable V-drawbar • Plastic mudguards • Wheel suspension, independently air-sprung • Incl. 100 km/h approval • Loading platform can be lowered to the road surface or the ground by means of air suspension • Approach angle approx. 4°. • Air suspension fully electronic • 4 air springs • 4 adjustable shock absorbers • Emergency valves for external filling of the air suspension • Tires 195/50R13C • Polyamide air hoses • Connections of the air suspension system made of stainless steel • Function only with a fully loaded 13-pole socket • Mounting of the spring system completely under the loading platform • 12V AGM vehicle battery 75 Ah • 2 sensors for height control • Electronic height control and adjustment of the driving level of the loading platform • Electronic remote control in the drawbar • Compressor 12V 18-Bar - Made in Germany • Air tank 10 liters • Charging socket for external battery charger • ASCU control system • 18mm multiplex floor panel, made of birch wood, with anti-slip coating • Lashing rails, left, right and front • Foldable license plate holder with LED lighting • Support wheel, automatic • Oversized safety lighting • Integrated rear fog light • Reversing light • 13-pole plug _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. Kodpfozzp N Iox Aa Rsdt The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,400 mm, loading space width: 2,470 mm, loading space height: 1,150 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 6x2 Container flatbed with Fassi F545 2.26 rear-mounted crane A-dimension 10770 mm Loading height 1150 mm Side boards 600 mm FH 500 6x2 chassis, CHH-MED, hydraulically steered trailing axle, single tires * New model * Electro-hydraulically steered trailing axle, single-tired * Globetrotter safety cab * Wheelbase 5,600 mm * Euro 6 * Diesel engine 12.8 l, 510 hp / 375 kW, 2652 Nm * Volvo Engine Brake+ (VEB+) * Liftable axle * AA tires 315/60R22.5 * Rest package FH, one bed * Auxiliary heater, cab 2 kW * Cool box with freezer compartment 33 L * Info and media package with navigation * Light and visibility package Plus * Rain sensor * LED headlights * Automatic headlight leveling * Headlight cleaning system * Air suspension on front axle * Volvo dynamic steering (VDS) * Disc brakes * EBS * Air suspension rear * 505 L aluminum tank, right * Trailer coupling Rockinger 400 G-150 * Air reservoir, aluminum * LED rear lights * Front axle tires 385/55R22.5 * AA tires 315/60R22.5 * Double fuel filter on the engine, large for poor fuel quality with water separator * Radio reception: AM/FM and DAB/DAB+ * USB port, 3-way * Steering wheel adjustment, in height and inclination with additional steering column adjustment * ESP * Adaptive cruise control (ACC) with collision warning and emergency braking function * Lane departure warning with steering assistance * Air conditioning with automatic temperature control and sun sensor * Internal sun visor, electric roller blind * Load/axle load display in the vehicle display * Driver's seat comfort, air-suspended, heated * Passenger seat standard, air-suspended * Center console (luxury) at sleeper (interior light, auxiliary heater/air conditioning, roof hatch...) * Roof window and emergency exit, electrically operated * Windows tinted * Cab color black * Central locking with remote control * External sun visor * Two LED rotating beacons, orange, on cab roof FASSI loading crane F545RA.2.26 xe-dynamic * Slewing range endless * All hydraulic cylinders double-acting Ksdpexcc Adofx Aa Rsdt * XF system (extra fast) + XP system (extra power) * Hydraulic outriggers, extendable on both sides, outrigger width 7.79 m * Outriggers can be operated remotely * Joystick control for 8 functions V7 * 1 LED work light on the knuckle arm Container flatbed body in low-profile design * Straight, perforated outer frame as a platform * 2 pairs of retractable container locking devices, extendable to 3 for accommodating 20-foot containers * Lateral layered plywood floor 30 mm, center module sanded * Front wall 2,000 mm high, made of 5.5 mm thick steel sheet * 4 warning signs with lighting, extendable to 3 meters * Internal platform dimensions: 6,200 x 2,470 x 2,000 mm A suitable trailer would also be available, price on request. Detailed vehicle specifications are available upon request. We are available for further information.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Kdedpfx Asyx Sxcea Rjt Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swivel Spindle Milling Machine TX 160 "Partnership Edition" Milling stop including parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front stop jaw, electric travel swivel device for the complete stop, quick-release lever for fixing, aluminum stop jaws and pressure device, arc milling stop, electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for set milling speed, Electrical system and safety devices according to CE standard, Table dimensions: 2,500 x 780 mm, Kedpfxjvlw Ide Aa Redt Milling spindle d= 30 mm, H= 140 mm, Milling speeds: 3000/4500/6000/8000/10000 rpm, Max. tool size under the table: d= 320 mm, H= 50 mm, Motor 7.5 kW / 10 HP, 400 Volt, 50 Hz, including automatic star-delta switch, Sound pressure level according to EN 27960: 83.9 – 87.3 dB(A), Spindle inclination: -45° to +45°, Electromotive spindle swivel adjustment including electronic display and decimal impulse setting, Partnership Edition complete with: "L" version with double-sided table extension and extendable workpiece support with emergency stop button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Right-left operation according to CE standard, Preparation for the installation of AIGNER integral stop jaws Ex works, from Seevetal location, without pre-carriage, freight and instruction, as inspected, subject to prior sale

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head Kdedpszz Hk Nsfx Aa Ret x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: ready for operation (used), functionality: fully functional, The ASGO MVZ300 vacuum mixer homogenizes meats, fats, spices, and liquids in a 300-liter tank. It is designed for industrial meat processing plants, meat workshops, and prepared meal manufacturers. It can be used to prepare stuffings, hamburgers, sausages, nuggets, kebabs, processed vegetables, or cheese products. ASGO also states that its range allows for the addition of water, ice, salt, and other ingredients during mixing. How does vacuum mixing work? The operator loads the ingredients into the tank, and then parallel arms mix the product in both directions. This ensures that the ingredients are distributed more evenly throughout the mixture. Next, the vacuum system removes some of the air present in the tank. As a result, the mixture contains fewer air pockets and retains a denser structure. Vacuum operation promotes degassing and homogenization of the mixtures. ASGO equips its vacuum range with a pump, a filter, and a vacuum level adjustment. In addition, a vacuum gauge allows monitoring the vacuum during the cycle. However, the provided nameplate does not specify the brand or flow rate of the pump mounted on this machine. Therefore, the pump nameplate should be checked before adding this data to the specification sheet. A tank suitable for 300-liter batches The designation MVZ300 refers to the 300-liter version of the ASGO range. This capacity is suitable for batch production and facilitates the repetition of recipes. In addition, the tilting tank simplifies the discharge of the product after mixing and provides better access to the inside of the machine during cleaning. ASGO offers three parallel arm designs for this range: Z, S, or T. Each design is suitable for a specific type of product and texture. However, the nameplate does not allow confirmation of the arms installed on this specific unit. Therefore, their shape should be verified on the photos of the tank before publishing this information. Integration into an agri-food line The MVZ300 can be used after a grinder, cutter, or manual preparation stage. It can then feed a stuffer, former, depositor, or packaging line. This limits handling between the mixing process and the next step. Kdedpezpwu Iefx Aa Rot In addition, ASGO offers several functions for the 300-liter models, including speed adjustment, programmable control, and CO2 cooling. However, the provided nameplate does not confirm these features. Therefore, they should only appear in the specification sheet if the photos or documentation of this machine prove their presence. Technical specifications: Manufacturer and model: ASGO MVZ300 Date and serial number: May 2016 – 26200 Tank capacity: 300 liters Power supply: 400 V – 50 Hz – 3 phases + ground – 17.2 A Power, weight, and noise level: 5.5 kW – 1,250 kg – 76 dB(A) Dimensions (L, W, H) in mm: 3100 x 1350 x 1900 2QPNY064

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm Ksdpsy Na Hvsfx Aa Rodt – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik Kedpszxiv Nofx Aa Redt • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: good (used), functionality: fully functional, first registration: 07/2015, fuel type: diesel, overall weight: 7,500 kg, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 8,650 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, central locking, crane, fog lights, onboard computer, === MAIN SPECIFICATIONS === Year: 2015 Hours: 5510 h Working height: 30 m Max. horizontal outreach: 19.5 m Platform capacity: 350 kg Truck type: MAN Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cabin: Single Engine power: — Fuel type: Diesel Platform dimensions (L x W): 1.6 m working cage Platform rotation: Yes (80° + 80°) Boom type: Telescopic / articulated combination Stabilisers: Yes – hydraulic outriggers CE certification: Yes Total vehicle weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Reliable truck mounted access platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a horizontal outreach of up to 19.5 meters, making it ideal for maintenance, installation, construction and infrastructure work. The machine is equipped with hydraulic outriggers, automatic cage levelling and a rotating aluminium working platform, ensuring stable and safe operation in various working environments. All machines are fully inspected, CE-certified and ready for immediate use. === DELIVERY === Crane loading available upon request for smooth transportation. Flexible shipping options tailored to your destination and logistics preferences. Kdjdeyr Nkzspfx Aa Rst All transports handled professionally by the logistics team of Collé Rental & Sales.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor Kjdszzz Rdepfx Aa Rodt - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).