Used Cjays Tig 200E Acdc Pulse for sale (1,353)

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Rcedpjh D Syvofx Am Tod Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: +-10 Volt Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Manufacturer's No. / Year of manufacture approx. 1985 Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch Redsdzql Sjpfx Am Tscd - 2-cycle / 4-cycle welding unit - Water-cooled - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Weight: 250 kg The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Rcsdpfodzqb Eex Am Tjd Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Wig welding machine MESSER GRIESHEIM, Type Combitig GW 23 AC/DC The machine only functions with DC welding and contact ignition. Manufacturer's serial number: 445276, Year of manufacture: approx. 1990 Power: 230 amps = 35% duty cycle 180 amps = 60% duty cycle 140 amps = 100% duty cycle Adjustment range: stepless Current type: DC Mains connection: 400 volts, 50 Hz, 32 amp plug - 2-cycle / 4-cycle welding unit - DC welding with contact ignition functions - AC welding and high-frequency ignition do not function - 7-meter hose package with WIG hand torch Rjdpfx Ajdzqa Ism Tjcd - Connection plug for remote potentiometer (foot switch) - without foot switch - Air-cooled - Gas pressure regulator Space requirement L x W x H: 850 x 480 x 600 mm Weight: approx. 90 kg The welding test yields good results when welding stainless steel with DC. The HF ignition does not function; however, the arc can be ignited by briefly making contact. When welding aluminum with AC, no arc is formed.

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system Redpfsdzqacjx Am Tscd - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator Rcjdpertvi Ujfx Am Ted - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug Rsdpfortvi Rox Am Tjcd - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Year of construction: 2003, condition: used, machine/vehicle number: 06H 127; Lg-Nr. 06565, Technical specifications: - Water-cooled DC inverter welding machine WIG TR 4, - Water-cooled MIG-MAG welding machine DV - IV – XT - Electrode welding machine STH 400 - For welding: stainless steel, steel, aluminum, etc. - 16 pre-selectable welding programs with: - Preset: electrode welding, WIG welding AC / DC, MIG-MAG welding - Digital voltage and amperage display - Welding current continuously adjustable from 10 A / 15 V to 400 A / 34 A - Max. welding current max. 400 A 60% duty cycle - 315 A 100% duty cycle - Power consumption 400 V / 43 A / 16 kVA - Pulse function - Welding current rise and fall setting - Arc control setting - Gas pre-flow and post-flow setting - Water-cooled WIG hose pack 8 m, lightweight design - Electrode welding cable + ground cable - Water-cooled MIG – MAG hose pack - Separate wire feeder unit DV – IV – XT for MIG – MAG welding - 4-roller wire feeder Rjdpecinmbsfx Am Tecd - Intermediate pack welding machine – wire feeder unit 4500 mm - Pressure regulator - Electrode welding cable + ground cable - Space requirement approx. W 550 x H 1650 x D 1100 mm - Weight approx. 350 kg

Year of construction: 2000, condition: good (used), machine/vehicle number: 84061, Offer 22629 - Air-cooled DC/AC welding system, mobile - For welding all weldable metals - e.g., stainless steel, steel, aluminum, brass, etc. - Welding current (TIG) continuously adjustable from 20 A to 270 A, 35% duty cycle - 100% duty cycle - Connection: 400 V - Includes: - Digital welding current display - Arc frequency control - HF start - Pulse function - Hose package, 5 m - Pressure reducer Rcodpfsixp D Usx Am Tjd - Ground cable - Mobile chassis - Space requirement: approx. W 550 x H 1150 / 1300 x D 950 mm - Weight: approx. 180 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 4495678, Offer 18336 Portable WIG-DC welding machine on a transport trolley Technical data: - WIG – DC + electrode welding - Welding current continuously adjustable for WIG welding from Rjdpfxshq T N De Am Tocd - 5 A - 10.0 V to 150 A - 22 V, 35% duty cycle - 100 A, 100% duty cycle - Connection: 220 V / 50 Hz, 15 A - Includes: - 2-cycle / 4-cycle function - HF ignition - Welding current decay setting - Gas pre-flow and post-flow regulation - Hose pack, 4.5 m length, lightweight design - Ground cable - Pressure reducer - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas cylinder holder, W 550 x H 900 x D 560 mm - Weight of transport trolley: approx. 10 kg

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Redpjw Tl Ifjfx Am Tocd

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Rjdpfx Ajyazhzsm Tocd

Condition: good (used), 450 A with premium panel. 16 units available. Price per unit: €2,500 excl. VAT. Rcedpfx Amex Emufe Tjd

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! Rsdpfxjdy E A Ss Am Tscd 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Condition: new, filter area: 11 m², energy consumption: 18 kWh, sheet thickness steel (max.): 2 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 5-week delivery ✈️ Delivery on request possible. ✅✅✅ Energy efficiency class A+++ ✅✅✅ A frequency converter for speed control is integrated. MA-JP12 - 18 KW/H LIST PRICE €22,500 Offer price ►► €15,172 * Gross price. Your net price for commercial customers: €12,750.00 MA-JP12 - V2 - 30 KW/H LIST PRICE €25,500 Offer price ►► €17,500 * Gross price. Your net price for commercial customers: €15,750.00 MA-JP16 - 30 KW/H - LIST PRICE €30,500 Offer price ►► €24,097 * Gross price. Your net price for commercial customers: €20,250.00 ➖➖➖➖➖ ►► Buy Now ◄◄ ✳️ Retain your liquidity! We offer a variety of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ Rsdpeggyhisfx Am Tjcd ✨✨ Buy directly from the manufacturer and benefit from price and quality advantages! ✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅ Versatile: The PROTON dust filter systems have been developed for a wide range of applications and are used in numerous industries. Especially in enclosed spaces and dusty working environments, they ensure a clean atmosphere and improved visibility of the workpiece surfaces – a crucial factor for the quality of the surface coating. ✅ Environmentally friendly & efficient: The environmentally friendly filter systems reliably capture dust particles and return cleaned air to the environment. Our jet-pulse filters are among the most widely used systems for the extraction of dry particles and for process air filtration. ✅ Maximum efficiency with low maintenance: The jet-pulse system is designed for maximum performance while minimizing maintenance time and operating costs. It is used in dust extraction systems, pneumatic conveying systems and for the removal of health-endangering substances from the air. ✅ Modularly expandable & recyclable: For even higher separation performance, the jet-pulse filter can be combined with bag filters or cartridge filters as well as a mono-cyclone. In systems with recovery systems – e.g. for the recycling of powder coatings – mono- or multi-cyclones can be used. ✅ Flexible design: The systems consist of integrated modules and can be adapted in size, material and filter type. Depending on the type of dust and the application, a choice can be made between cartridge or bag filters. ✅ Powerful & sustainable: PROTON dust filter systems impress with their high filtration performance and contribute significantly to improving the quality of work as well as protecting the environment and employees. ⭐Note on prices:⭐ The stated prices do not include a mono-cyclone and apply exclusively to the jet-pulse filter unit. The control cabinet is also not included in the scope of supply. For prices on additional components such as a control cabinet or mono-cyclone, please contact our sales department. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: good (used), We are selling a TIG welding machine ESS TIGARC 300 Redpfx Amou Sr Upo Tscd

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Rcjdpfxeu Sqqio Am Tod Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: used, Year of construction: 1991, functionality: unexamined, pressing force: 20 t, stroke length: 51 mm, overall weight: 3,600 kg, BSTA 200E press, year of mfg. 1991, in 2000 overhauled, with BBV 101/75 roll feed on right-hand side. Adj. stroke 8 to 51 mm Rcedow S Hagspfx Am Tsd Nominal capacity 20 tons Max. tool loading width 420 mm Available immediately ex-stock. Please contact us for more information!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 755 mm, total width: 400 mm, total length: 880 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 60 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 16 A, open-circuit voltage: 87 V, welding current at 60% duty cycle: 200 A, welding current at 100% duty cycle: 170 A, input current: 16 A, protection type (IP code): IP23, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 Including TIG torch i-LTW 3000-PM, 4 m TIG Welding Welding range 3~ 400 V: [A] 5 - 300 Voltage range: [V] 10.2 - 20 TIG duty cycle AC 400 V Duty cycle AC 100% (40°C): [A] 200 Duty cycle AC 60% (40°C): [A] 230 Duty cycle AC max. welding current (40°C): [%] 30 TIG duty cycle DC 400 V Duty cycle DC 100% (40°C): [A] 230 Duty cycle DC 60% (40°C): [A] 270 Duty cycle DC max. welding current (40°C): [%] 45 Electrode Welding Welding range 400 V: [A] 10 - 200 Voltage range: [V] 20.4 - 28 Usable electrodes: [Ø in mm] 1.5 - 5 Electrode duty cycle Duty cycle 100% (40°C): [A] 170 Duty cycle 60%: [A] 200 Duty cycle max. welding current (40°C): [%] 60 General Specifications Rodpsyrttyefx Am Tocd Open circuit voltage: [V] 77 - 87 Power supply 400 V Mains voltage 3~ (50/60 Hz): [V] 400 Mains fuse 3~ (50/60 Hz): [A] 16 Positive mains tolerance 3~ (50/60 Hz): [%] 15 Negative mains tolerance 3~ (50/60 Hz): [%] 15 Mains plug: CEE 16 Standards and Approvals Protection class: IP23S Insulation class: F Standard: EN 60974-01 Markings/Certification: CE, S Cooling system Type: Gas-cooled, water-cooled Cooling capacity (l/min): [kW] 1.14 Tank capacity: [l] 3.4 Dimensions (L x W x H): [mm] 880 × 400 × 755 Weight: [kg] 60

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Rodpfewbknbsx Am Tjcd We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pulsotronic M-Pulse 2 Metal Detector with Conveyor Brand: Pulsotronic-Anlagentechnik GmbH Type: M-Pulse 2 BD-HD 350x150 LPW MFT Year of manufacture: 2018 Serial number: 90007273 Rcjdpfx Aeyr S Nmom Tjd Voltage: 115/230 VAC Frequency: 50-60 Hz Detection opening dimensions: 350 x 120 mm Belt width: 240 mm Overall dimensions: 3500 x 900 x 1300 mm The Pulsotronic M-Pulse 2 metal detector is an advanced quality control system from 2018, essential for ensuring food safety in production processes. The device is designed for precise detection of metallic contaminants in products transported on the integrated belt conveyor. With a detection opening of 350 x 120 mm and a robust stainless steel construction, the system is perfectly suited for the food industry, guaranteeing maximum detection sensitivity and easy maintenance of hygiene.

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse Rsdoxf Nvpopfx Am Tjcd - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915

Condition: excellent (used), Power source 250 Amp (60% duty cycle) WELDKAR WK MIG 250 DUAL PULS, suitable for industrial use. In continuous use, the maximum welding current is 195 A. The MIG 250 Dual Pulse welding machine is versatile and is suitable for MIG / MAG, TIG (lifting arc) and MMA (electrode) welding. Equipped with various synergic welding programs for steel, stainless steel, aluminum and CuSi3. In addition, this welder is equipped with the Pulse and double pulse function. Up to 100 welding programs can be saved and recalled. Parameters can also be manually adjusted by the welder if required. The power source is equipped with a digital control panel where various parameters can be easily set and read. Including gas flow, soft start, combustion, downward slope, gas flow and pulse rate control. The latter is necessary for thin-walled welding. The 2 - 4 stroke setting provides extra convenience when welding longer parts. Partly due to the 4-roller wire feed system, a long and trouble-free wire feed is guaranteed. With the MMA function, coated electrodes can be welded. To further optimize the weld, hot start arc force parameters can be set. The welder is portable and available in a mobile frame. Furthermore, they are CE and EMC certified and suitable for use with generators with a minimum power of 12.5 kVA. Rjded Nzlxspfx Am Tecd WELDING MACHINES ARE COMPLETELY NEW, POST-EXHIBITION.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped ⭐ Device description/scope of delivery: Fronius Tps 4000 device fully equipped - nothing more is possible! - Pulse 400 amp power source - Fk 4000 FC cooling device with the optional filter including flow control - VR 4000 with the optional rollers at the bottom + extra long connecting hose package + metal feed rollers - only the best of the best installed. - Fronius Aw5000/aw4000 hose package with Job Master function on the burner (==>Display on the torch / amps, job, feed, arc adjustable on the torch) Photo = scope of delivery. New price approx. 15,000 euros (net) we offer it for 1/3 new price. Not comparable to Transsteel scrap. Rodpfjpgkkbex Am Tecd Why it's better to buy from us than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have 40-60 pieces in stock. Only these Fronius devices, no other manufacturers! - We don't just push the devices through, we disassemble them, inspect wear parts, replace them and only when everything works perfectly are the devices sold. - All of our devices are sold with the popular Fronius burners. NOT a 100 euro E*b*a*y burner but QUALITY! Depending on the equipment, the Fronius burners cost between 650 euros and 900 euros net! - Our devices are “all” clean and have no burn holes in the displays or countless burn holes/dents scattered throughout the device! You are buying an item from us that is worth seeing and doesn't look completely finished! - As a customer of ours, you have the opportunity to obtain suitable spare parts and support cheaply if the worst comes to the worst. - You will receive a proper invoice from us with VAT shown. All devices can be viewed, paid for and picked up by appointment at our main warehouse in Vienna! Insured shipping on a pallet is of course possible!

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 345 mm, total width: 180 mm, total length: 470 mm, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 12 months, type of cooling: air, hose package length: 4,000 mm, electrical fuse: 12 A, welding current at 60% duty cycle: 220 A, protection type (IP code): IP23, Equipment: documentation/manual, type plate available, MICRO-IMPULSE WELDING UNIT MICROSPOT FOR MOLD REPAIR Fully digital: The completely digital welding current source MICRO SPOT allows for almost completely unrestricted shaping of the weld pulse in the millisecond range when setting parameters. Fully functional: The MICRO SPOT is not only the first and only repair welding unit with digital pulse shaping, it is also one of the most advanced digital power sources for: - TIG DC welding (2-stroke or 4-stroke) - TIG AC welding (2-stroke or 4-stroke) - TIG AC welding (2-stroke or 4-stroke) with automatic ball formation - MMA DC+ welding - MMA DC- welding - MMA AC welding Fully creative: Redpfx Amoxzrv Rs Tocd Depending on the task and material, the “Creative Pulse Modulation” allows influence over the weld pool by means of oscillation superposition, soft or steep pulse rise, gentle pulse fade-out or abrupt pulse cut-off, etc. Fully intelligent: - Anti-stick function - Automatic post-flow gas (weld current dependent) - Automatic ball formation - Touch or HF ignition - Digital welding process control - Energy-saving inverter technology - Earth fault monitoring - Remote controllable via foot switch or torch - Gas test function - Generator-compatible - Job mode and job editing - Microprocessor control - Polarity reversal and RPI ignition - Welding current flow signal - Flow monitor for torch cooling - Temperature-controlled fan - Overtemperature protection Technical data: Mains voltage: 230 V Welding current: TIG: 3 – 220 A Electrode: 3 – 180 A Dimensions LxWxH mm: 470/180/345 Weight: 16.5 kg Protection class: IP 23