TIG welder

OERLIKON CITOTIG ADW 270

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for packing presse 100P2 with Rotary Cage capacity up to 2 000 kg/h power: elevator 2,2 kW (3 PS) mill 4 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 Knsdpob Ncb Njfx Ah Ujf connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 260 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A current flow 60% ED: 190 A Kedocvbu Rspfx Ah Uonf current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A space needed: 1200 x 600 x 800 mm weight: 300 kg

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for single belt press EBP420, EBP500, EBP580 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 280 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside Knodpsb Ncmfofx Ah Uof mash discharge height 1,250 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, Year of construction: 2025, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities * Cleaning program Knodpfx Aot U Iiysh Ujf * Extensive statistics * Only short downtime due to double holder * Compact design

Year of construction: 2001, condition: used, machine/vehicle number: 631-0850-001, Machine designation Tig welding machine Ksdpfe Rf Aqsx Ah Ujnf Stock-No. MA647 Manufacturer LORSCH TYPE IT 252 GW Year of manufacture approx. 2001 Machine no. 631-0850-001 Weight approx. 58kg size W 450 x L 1100 x H 750mm Welding power 250A technical data: 380 Volt, AC - DC Accessories: hose set, manometer

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Knodpfxevyuuqs Ah Usf

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in Ksdpfx Ahswf Rg Se Ujnf

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer Knsdpfx Ahsdzqace Ujf - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,160 h, Operating hours: 2160, First registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2,200 Max. lifting capacity: 3,300 kg Max. lift height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled Power: 85 kW (115 hp), 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive: Pump: electronically controlled with variable output Engine: variable displacement motor EPD TOP incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission 2-speed, electrohydraulically controlled Max speed 1st/2nd gear: 16 / 20 km/h; optionally 40 km/h Cab: Closed cab, split door 360° all-round visibility GRAMMER air-suspension seat with lap belt ROPS/FOPS certified Heater Front, roof, and rear wipers Sun blind 4x1 joystick (electronic, capacitive release) incl. travel direction switch Telescopic boom: 2-stage with electronic end position damping (Soft Stop) Attachment carrier quick-change system type "ZM2," hydraulically operated from cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle fixed, rear axle oscillating Brake system: Servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine stops Hydraulics: Pump with variable flow (LOAD SENSING) Working hydraulics flow: 125 l/min Hydraulic fan flow: 46 l/min Total flow: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V system 100 Ah battery 120A alternator Knsdpfx Asupq Tqsh Uef Stabilisation control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signals, attachment recognition and overload shutoff Optional equipment: Tires: 400/70-24 158A8 Rear hydraulic connection with separate control EU approval as tractor/agricultural tractor, 40 km/h Trailer hitch, height adjustable, self-locking, 30/32 mm pins, incl. connection for trailer lighting Air conditioning Boom suspension (B.S.S.) LED beacon on cab roof (approval responsibility of customer) LED work lights on cab (2 front, 2 rear) replacing standard halogen headlights 2 work lights at the end of the first boom section (base boom) ASCS upgrade: display with all ASCS functions + constant flow front Location: Molitor GbR

Condition: new, Year of construction: 2025, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Ksdsi D D A Sepfx Ah Uenf Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.