Used Climatic Test Chamber -5°C...+90°C for sale (96,427)

Year of construction: 2006, condition: like new (used), functionality: fully functional, Zum Verkauf stehen 3 pH-Controller für Dosieranlagen des Herstellers Dosatronic. – geeignet für pH-Regelung und chemische Dosiersysteme – industrielle Ausführung – unbenutzt (Lagerware / New Old Stock) Die Geräte stammen aus einem industriellen Lagerbestand und wurden nie installiert. Geeignet für: – Wasseraufbereitung – Schwimmbadtechnik – Chemische Industrie – Lebensmittelproduktion Zustand: Unbenutzt, jedoch länger gelagert. Funktionsprüfung nicht durchgeführt. Verkauf einzeln oder als Komplettpaket möglich. Preis: 390 € / Stück oder 1.050 € für alle 3 Standort: Slowakei (EU) Versand europaweit möglich For sale: 3 pH controllers for dosing systems (Dosatronic) – suitable for pH control and chemical dosing – industrial version – unused (new old stock) The units come from industrial stock and were never installed. Suitable for: – water treatment – swimming pool systems – chemical processing – food industry Condition: Unused, long-term storage. Functionality not tested. Available individually or as a lot. Price: 390 € per unit Hnsdpfx Asyw Riqepnol or 1,050 € for all 3 Location: Slovakia (EU) Worldwide shipping possible

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit Hnodef Axn Ajpfx Apnol ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Hodpfekqz H Djx Apnenl

Condition: new, Year of construction: 2025, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Hodpfx Apjv Iqcmsnonl Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Optimized unloading systems tailored to specific processing needs. Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Condition: used, spindle diameter 102 mm x-travel 1600 mm y-travel 1210 mm z-axis 1475 mm spindle travel 710 mm B-axis (table) 360 ° Table dimensions 1250x1400 mm Table load 3500 kg T-slots 22H7 T-slot - distance 125 mm spindle turning speed range 4-1600 U/min spindle drive 16,5 kW total power requirement 47 kW weight of the machine ca. 9,25 t Feed X/Z 6000 mm/min Feed Y 4000 mm/min Feed W 3150 mm/min Rapid traverse X/Z 6000 mm/min Rapid traverse Y 4000 mm/min Rapid traverse W 3150 mm/min Rapid traverse B 2.5 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hedpfxoyqv E No Apnsnl About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Technical data of the grating: Manufacturer: Gi-Ro Vreden Condition of the goods: new (unassembled) Reason for return: wrong order end customer The scope of delivery includes: 01x pressed grate, new (unassembled) Material color: hot-dip galvanized Total depth: 1,000 mm (bearing bar direction) Total width: 980 mm (cross bar direction) bearing bar dim.: 35/1,7 mm S355JR Hjdpfek Ebq Tox Apnsnl TS anti-slip: no QS anti-slip: no edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9,35 kg | pcs. Internal designation: R

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Hnodeyybt Ejpfx Apnel Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: like new (used), Measuring range: 450 bar Signal output: 4...20mA Operating voltage: 24...32VDC Serial number: 232A4451 Width: 126 mm Height: 145 mm Hnsdpfxsypb I Ts Apnel Depth: 75 mm Weight: 837 g Condition: Like new

Condition: good (used), 1 x 90 degree conveyor belt on stainless steel stand with wheels. Hnjdpfx Apjwvg Umsnsl Technical specification: Motor manufacturer - SEW Eurodrive. Belt width - 910 mm W x 990mm H. Belt type - modular. Footprint dimensions - 2300mm x 2550mm (motor box to far side) X 965mm H. Electrical requirements - 3 ph. Video available on request.

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container / Swap Body 30,900L / 1 compartment UN PORTABLE T11 Bottom discharge Steam heating Insulated Payload: 31,900 kg Design temperature: -40 to +130°C 5Y/CSC inspection valid until 08/2028 = Additional Information = Hnjdpfxjyha T Es Apnol General Information Year of manufacture: Apr. 2003 Model year: 2003 Weights Tare weight: 4,100 kg Payload: 31,900 kg Gross vehicle weight: 36,000 kg Functional Internal loading volume: 30,850 l Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: very good Visual condition: good For more information Please contact Arne Honingh for further details.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Hnodpfxouzn Nne Apnsl Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), Friction wheel, running wheel for bridge crane, hall crane, assembly crane, workplace crane -Wheel: for crane chassis .: 1031 4146 -Type:500h11 Part 1 Crane Chassis -Tread diameter: 500 mm -Wheel intermediate size: 90 mm -Hole: Ø 165 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 540 x 120 mm -Weight: 172 kg/piece Hnsdpfx Apov Hb U Djnjl

Condition: used, wire electrode, welding wire, welding wire -Welding wire: Avesta 904L -EN: 12072 AWS A5.9/SFA 5.9 ER385 -O: 1.00 mm -Dimension: O 300/100 mm Hsdpeff Aq Ijfx Apnsnl -Weight reel: 8.9 kg

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Hjdpfx Aorp Dyrspnsnl Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH Hedpfx Apjfktnysnenl For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes Hnjdpfxeb A Rkdo Apnol -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Condition: new, Indramat MAC 090A-0-ZD-2-C / 110-A-0 / S005 SN:75121 ,unused, 100% functional, scope of delivery according to photos Hnodpfoi D Ihisx Apnol

Condition: ready for operation (used), Rexroth MAC090C-0-KD-2-C/110-A-0 3-phase permanent magnet motor MNR: R911223273 SN:MAC090-93905, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdpfx Apotz Idksnjl

Condition: new, Rexroth M-3 SED 6 CK13/350 C G24 N9K73 L seat valve R901257167, unused, 100% functional, scope of delivery as per photos Hsdpoi Eczrjfx Apnenl

Condition: ready for operation (used), ABB Robotics PS 90/6-79-P-LSS-4318 / 3 HAC 2848-1/1 motor SN: 004.8561610017, used, in good condition, 100% fully functional, scope of delivery as per photos. Hnedpfx Apoxtv Twjnsl

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, SN MAC090-48116, after overhaul by the manufacturer, unused in opened original packaging, 100% functional Hedpfoi D Nf Hsx Apnonl

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 permanent three-phase servo motor + Stegmann DG 1604 2500 PULS / REV, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdsi D Ih Repfx Apnel

Condition: new, Siemens Simovert 6SE7022-5FA87-2DA0 braking unit E version C > unused < in opened original packaging, 100% functional Hnsdpfexahtiox Apnol

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 Permanent three-phase servo motor SN:54968 without tacho and encoder, used, normal signs of wear, 100% functional, scope of delivery as per photos Hnsdjrmga Uopfx Apnsl

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-0/WI520LV / 235450 servomotor, serial number: MAC0290-85049 + Heidenhain ROD 1424.003-1250, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Hedpfx Apjx Etyzsnjnl