Used Condenser Guntner for sale (927)

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Godpfxsxc Ni Ro Aqiouf

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Godpfsv Sugqjx Aqisuf

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Guedpfx Ajrp E Nkoqief

Condition: ready for operation (used), A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning unit Boge CC35, tank capacity: approx. 86l, tank filling volume: 43l. 9) airtelligence Provis control unit with capacity measurement and OPS interface. 10) Cooling water recooling station, cooling capacity: 600kW, volume flow: 37.2m³/h, weight: approx. 1000kg. The entire system is operated with a central control system. Complete documentation available. On-site inspection is possible. Guodpjuanrdjfx Aqief

Year of construction: 2008, condition: ready for operation (used), A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible. Gsdpfxsv Ip Tde Aqieuf

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Gsdpex Sywasfx Aqieuf

Condition: ready for operation (used), Year of construction: 2020, A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible. Gedox Uq Uujpfx Aqijuf

Condition: used, mileage: 268,153 km, power: 330 kW (448.67 HP), axle configuration: 8x4, color: red, driver cabin: day cab, gearing type: automatic, total length: 89,000 mm, total width: 25,500 mm, total height: 40,000 mm, loading space length: 56,000 mm, loading space width: 23,800 mm, loading space height: 10,000 mm, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (tel. [phone number]). Mercedes-Benz Arocs 4145 K 8x4 Meiller three-way tipper Godpfxezkpkqo Aqiouf A1C Front axle 7.5 t, A1Y Front axle, straight design, A2G Rear axle, ring gear 300, planetary, 13.4 t, A6A Axle ratio i = 4.571, B1B Electronic braking system with ABS and ASR, B1Z ABS, disengageable, B2A Disc brake, on front and rear axles, B2E Disc brakes with full protection, B2X Parking brake, electronic, B4A Condensate monitoring, for compressed air system, B4M Compressed air tank, steel, C0B Frame overhang 800 mm, C2O Wheelbase 4550 mm, C5J Mounting parts, for tipper, C5P Frame bolted, C5U Road paver preparation, C6C Steering, 1-circuit, C6J Steering assist pump, unregulated, C6Q Stabilizer, front axle, C6Y Stabilizer, under frame, rear axle, C7C Rear-UFS, foldable, steel tipper, test force 80%, C8A Aluminum fender, on rear axle, CLW Steering oil cooler, D0E Steering wheel, diameter 500 mm, D0L Smoker's package, D0S Compressed air connection, in the cab, D1C Driver's air suspension seat, comfort, D1N Co-driver's functional seat, D3Q Seat cover, velour, D6F Air conditioning, D6I Waste heat utilization, D6Z Construction site filter, D7G Storage compartment lid, driver and co-driver side, D7Q Storage compartment, high, on engine tunnel, D8A Roof hatch/ventilation flap, roof, E0F Batteries, Exide, E1B Batteries 2 x 12 V/170 Ah, maintenance-free, E1N Generator 28 V/100 A, E2J Fuse box, E3L Socket 24 V/15 A, co-driver footwell, E3Q Additional socket 24 V/15 A, co-driver footwell, E5H Switch for night driving lights, F0G Side module, N3G Vehicle, F0Y Mirror cover, construction vehicle, F1B M-cab ClassicSpace, 2.30 m, tunnel 170 mm, F1Q M-cab, F2B Floor variant, tunnel 170 mm, F2G Cab width 2.30 m, F2N Cab, 600 mm mounting height, F2U ClassicSpace, F3B Cab mounting, comfort, steel-sprung, F3W Cab tilting device, mechanical-hydraulic, F4I Cab rear wall, with window, F4X External storage compartment flap, left, F5L Sun visor, transparent, F6C Windshield, tinted, F6I Front mirror, heated, F6R Compressed air horns, cab roof, F7B Bumper, corners made of steel, F7D Bumper, center part with towing loops, tow hitch, F7Y Cab entry, left/right, movable, F7Z Footstep, with handrail on the roof, F8E Locking system, with central locking, F8V Light sensor, F8W Rain sensor, G0R Gearbox support arms, optimized for installation, G0T Predictive Powertrain Control, G0W Driving program offroad, G2C Gearbox G 230-12/11.7-0.78, G5A Single-plate clutch, G5G Mercedes PowerShift 3, I2G Tires, tubeless, 315/80 R 22.5 front/front leading/rear leading axle, I2H Tires, tubeless, 315/80 R 22.5 rear axle, I4L Wheel formula 8x4/4, I6I Vehicle production plant Wörth, I6W Leaf spring suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2K Loudspeaker, 2-way system, J2Y CB radio, 24 V, J3H On-Board Unit (OBU), installation + activation at the factory, J6B Multimedia cockpit, J8Y Pre-installation for Truck Data Center 7, J9D Pre-installation for toll collection, J9X Deletion of Truck Data Center, K0T Main tank, left, K1T Tank 320 l, left, 735 x 700 x 750 mm, aluminum, K3T AdBlue tank 25 l, K5M Tanks, lockable, K5S Protective cap for AdBlue dosing system, K7D Exhaust system, tailpipe to the right outside, K7R Exhaust pipe, straight, above the second axle, L0A Lighting regulations, according to UN-R 48.06, L1B Daytime running lights, L1Q Rear lights, design, in sheet metal housing with grid, L2H Sid

Condition: used, mileage: 141,880 km, power: 315 kW (428.28 HP), axle configuration: 4x2, color: red, gearing type: automatic, suspension: air, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at the telephone number provided). Mercedes-Benz Actros 1843 LL 4x2 BDF swap body chassis Gujdpfsy Ivqnsx Aqief S&G driving school equipment, 6 seats, A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle, angled design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A3D rear axle with active lubrication, unregulated, A5H axle ratio i = 2.611, B1B electronic braking system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1I electronic compressed air supply and control, high, B2A disc brake, on front and rear axles, B2X parking brake, electronic, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, B5D trailer stability control assistant (TSA), B5L trailer brake connection at the rear, Duo-Matic+Standard, C3H wheelbase 5500 mm, C4I frame overhang 2400 mm, C6I power steering pump, regulated, C8Y underbody fairing, aerodynamic, D0S compressed air connection, in the cab, D1C driver's air suspension seat, comfort, D1P co-driver's air suspension seat, comfort, D3Q seat cover, velour, D4Q shaving mirror, D4S sun visor, 1-piece, electric, front window, D4T curtain, transversely in front of the bed(s), D4Y sun visor, side, driver's side, D5F LED ambient lighting, for driving and living area, D6F air conditioning, D6I waste heat recovery system, D6M hot water auxiliary heater, cab, D7G storage compartment lid, driver's and co-driver's side, D7J drawers, under the bed, D7R storage flaps, above the windshield, D8N lift roof, electric, D9A pre-equipment for comfort bed, top, wide, E5H switch for night driving light, E5K switch for MirrorCam, on the bed, E6A trailer socket 24 V, 15-pole, E7F cable remote control for air suspension, F1H L-cab BigSpace, 2.50 m, level floor, F3C cab mounting, comfort, air-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall without window, F4X external storage compartment flap, left, F4Z storage box, left under the cab, F6C windshield tinted, F6I front mirror, heated, F6Q air horn, F6T MirrorCam, F7T door extension, F7X cab entry left/right, fixed, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0T Predictive Powertrain Control, G2B transmission G 211-12/14.93-1.0, G5A single-plate clutch, I4A axle configuration 4x2, I5A 18.0-tonner, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J2U navigation system, J3U prerequisite Fleetboard Manager App, J3V Truck Data Center 7, JDSE rear seat system, 3 persons, 3-point belts, JDSM middle seat with seat heating, air-sprung, JDSY head impact protection driver's/co-driver's seat, JDYF pedals for driving school vehicle, middle seat and co-driver, K7D exhaust system, tailpipe to the right outside, L0A lighting regulation, according to UN-R 48.06, L1A bi-xenon headlights, L1C LED daytime running lights, L1D automatic high beam/low beam and turning lights, L1H fog lights, halogen, L1P LED rear lights, L2H side marker lights, flashing, L3A work lights, below, L3Z headlight cleaning system, M5A 2nd generation engine OM470, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M6L air compressor, 2 cylinders, M7K radiator grille, M7T water

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Operating consumption values: Potable water approx. 40 l/min Godpfx Aqszrfraeijuf Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Condition: good (used), Oil-water separator with pre-separation Tank volume (liters) 228.4 Compressor capacity, max. m³/min 58.5 Condensate inlet connection 3 x G1/2, 1 x G1 Filling volume in liters 158.8 Guodsg Db R Aepfx Aqijf Filter capacity in liters 1 x 37.2 / 1 x 40.3

Condition: used, Year of construction: 1999, Steam generator by company ZAFA heating media: gas, capacity: 280 kg/h incl. condensate vessel, steam-drying, steam-hose and outdoor chimney Capacity: 280 kg/h Vapour pressure: 10 bar Volume: 38 Liter Length: 1,60 m Width: 0,75 m Height: 1,65 m Weight: 1000 kg Position: horizontal Features: switch box on producer Guodpfx Ajztzbtjqijf Periphery: connection chimney, diameter 0.30 m

Condition: used, Year of construction: 1998, Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia Additional title: Refrigerant: Ammonia Cooling capacity: 70 kW Guodpfxezty Ilj Aqijf Design to: -8 °C Design tc: 27 °C Power: 15 kW Operation / Control: Control cabinet with hardware control Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Guodoztwz Aopfx Aqijf Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Godpezlg E Iofx Aqijuf Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Grounding bolt Cables in UL design

Condition: excellent (used), Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes proven, configurable standard weighing applications: · BASIC for simple weighing systems · COUNT for piece counting · CHECK for simple checkweighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be configured from a PC using the IT3000 Configurator or directly via the network using a web browser. After each weighing operation, the weight, date, time, and entered data can be saved directly to a file on the PC's hard drive via Ethernet. No special PC software is required for this. In ONLINE mode, the IT3000 can be remotely controlled from a PC via the Ethernet interface. The command set includes weight requests, taring, zero-setting, and dialog functions. Any scale overload or other faults are logged in an error table—complete with date and time—and can be viewed via a web browser. Features an integrated legal-for-trade weight memory; optional legal-for-trade weight memory on the PC hard drive is also available. Operation User guidance via 20-character backlit plain-text display; data entry via numeric and function keys beneath an acid-resistant overlay. Weighing Electronics Integrated measuring amplifier for connecting up to eight 350-ohm strain-gauge load cells (4- and 6-wire technology). Calibration as single-range or multi-range scale and as single-interval or multi-interval scale. Legal-for-trade resolution: 6,000d at max. 80% preload; internal resolution: 524,000d. 50 filtered measurements per second. Calibration performed either on the IT3000 via display/keypad or via the Ethernet interface. Ethernet Interface Gujdpfxozp Uybe Aqiof Integrated Ethernet interface (RJ45) with configurable IP address for 10/100BASE-T networks. Configuration via network using "EtherPort Tool" PC software. Security Data stored in a power-failure-proof manner. Password protection. Interfaces One optional serial interface (selectable: RS232, RS485, or passive 20mA CL) for connecting a printer, remote display, or reference scale. Digital Inputs and Outputs Optional PIM module with two digital 24V inputs and two digital 24V outputs. Power Supply 110 (–15%) – 240 (+10%) VAC; 50/60 Hz, Max. power consumption: 15 VA; Option: 12 – 30 VDC. Operating Temperature –10°C to +40°C at 95% relative humidity, non-condensing. Options / Accessories Ethernet connection cable Protective cover PC COM+ communication software for online operation PC ARCHIVE software for storing weight data on a PC hard drive in a format suitable for legal-for-trade applications. You can find additional items in other sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Guedpfjykrtpsx Aqiof Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2020, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers (index H+I). The hood has undergone an inspection in our in-house workshop and the unit is fully functional. You will receive an invoice with VAT shown. Are you looking for a specific type of Rational equipment? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Professional overhaul/inspection & expert cleaning Checked & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Gujdpezn H E Tofx Aqijf This Ultra Vent hood features patented condensation technology, which binds and removes vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is completely eliminated. The installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE20015039601 Year of manufacture: 2020 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Control System: Programmable color touch control panel Ethernet network interface RS232 interface Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Used Gjdpfx Aqjzlgyroisuf The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, mileage: 86,332 km, power: 350 kW (475.87 HP), axle configuration: 6x4, color: red, driver cabin: day cab, gearing type: automatic, total length: 80,000 mm, total width: 26,000 mm, total height: 35,000 mm, loading space length: 48,200 mm, loading space width: 24,000 mm, loading space height: 9,500 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, - Braking system Guedjztlt Hopfx Aqief For inquiries regarding the vehicle, please contact Mr. Seidel (at phone number...). Mercedes-Benz Arocs 2648 K 6x4 Dautel three-way tipper Thermo-insulated Dautel 3-way tipper, with sideboards, tilting mechanism for asphalt/grain, electronic sliding tarpaulin, A1C front axle 7.5 t, A1Y front axle, straight design, A2G rear axle, bevel gear 300, planetary gears, 13.4 t, A5Y axle ratio i = 4.333, B1B electronic braking system with ABS and ASR, B1Z ABS, switchable, B2A disc brake, on front and rear axles, B2E disc brakes with full protection, B2X parking brake, electronic, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4L compressed air tank, aluminum, complete, B5B trailer brake, 2-line, C0B frame overhang 800 mm, C1R wheelbase 3600 mm, C5J fastening parts, for tipper, C5P frame bolted, C6C steering, 1-circuit, C6J steering assist pump, unregulated, C6Q stabilizer, front axle, C6Y stabilizer, under frame, rear axle, C7K battery carrier, batteries stacked, C8F fender, for chassis transport, C9Y omission of rear underrun protection (ECE), CLW steering oil cooler, D0L smoker package, D0S compressed air connection, in the cab, D1D driver's air-suspension seat, climate control, D1N co-driver's functional seat, D2N seat back, release mechanism, driver's seat, D2W armrests, on both sides, co-driver's seat, D3K seat cover, Dinamica, black, driver's seat, D3T seat cover, velour, co-driver's seat, D4Y sun visor, side, driver's side, D6G automatic climate control, D6I waste heat recovery, D6M hot water auxiliary heater, cab, D7G storage compartment lid, driver and co-driver side, D7R storage flaps, above windshield, D8A roof hatch/ventilation flap, roof, E3W PSM 2nd generation, E4B interface, Fleet Management System FMS, E5H switch for night running lights, E6A trailer socket 24 V, 15-pin, E6Z reversing warning, F0Y mirror cover, construction vehicle, F1B M-cab ClassicSpace, 2.30 m, tunnel 170 mm, F3B cab mounting, comfort, steel-sprung, F4I cab rear wall, with window, F4X storage compartment exterior flap, left, F5L external sun visor, transparent, F6C windshield tinted, F6I front mirror, heated, F6Q compressed air horn, F7Y cab entry left/right, movable, F7Z step, with handrail on the roof, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0B powertrain, 44 t to 80 t, G0R gearbox torque arms, optimized for installation, G0T Predictive Powertrain Control, G0W offroad driving program, G2F gearbox G 330-12/11.63-0.77, G5A single-disc clutch, G5G Mercedes PowerShift 3, I2H tires, tubeless, 315/80 R 22.5 rear axle, I2P tires, tubeless, 385/65 R 22.5 front axle/front steered axle/rear steered axle, I4I wheel formula 6x4, I5F 26-ton vehicle, I6I vehicle production site Wörth, I6W leaf suspension, rear axle, J1O tachograph, digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2G digital radio, J2K speakers, 2-way system, J2U navigation system, J2Y CB radio, 24 V, J3U prerequisite Fleetboard Manager App, J3V Truck Data Center 7, J6C multimedia cockpit, interactive, J6Y Remote Online, J6Z pre-equipment for Mercedes-Benz Truck App Portal, J8Y pre-equipment for Truck Data Center 7, J9D pre-equipment for toll collection, K1C fuel tank 290 l, left, 650 x 565 x 950 mm, aluminum, K3V AdBlue tank 60 l, left, K5S protective cap for AdBlue dosing system, K7D exhaust system, tailpipe to the right side, L0A lighting regulation, according to UN-R

Condition: used, mileage: 88,060 km, power: 115 kW (156.36 HP), color: yellow, gearing type: automatic, loading space length: 60,600 mm, loading space width: 24,500 mm, loading space height: 25,200 mm, Year of construction: 2020, Equipment: ABS, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (by phone). Guedpsyxklnsfx Aqiof Mercedes-Benz Axor 816 4x2 box body for furniture transport A1M Front axle, 4.1 t; A2B Rear axle, crown wheel 325, hypoid, 6.2 t; A5L Axle ratio i = 3.417; B1B Electronic braking system with ABS and ASR; B1C Electronic compressed air supply unit, low; B1F Heating for the electronic compressed air supply unit; B2A Disc brakes on front and rear axles; B4A Condensate monitoring for compressed air system; C2J Wheelbase 4,220 mm; C5I Mounting parts for flatbed body; C6A Steering ZF 8090; C6Z Reinforced stabilizer, underframe, rear axle; C7A Rear underrun protection (ECE); C7M Side guard, weight-optimized; D1B Standard driver’s air suspension seat; D1S Standard passenger’s air suspension seat; D1Z Middle seat with 3-point safety belt; D3X Flat fabric seat cover; D4A Standard dashboard; D4W Electric windows, both sides; D6Y Pollen filter; D7L Overhead storage above the windscreen, 1 compartment; D8A Roof hatch/vent; E0Y Battery cover; E1E Maintenance-free batteries, 2 x 12 V/100 Ah; E1N Generator 28 V/100 A; E3F Additional 12 V/15 A socket on the beltline; E3I Additional 24 V/15 A socket on the beltline; E5A Switch No. 1 for bodybuilder electrical system; F1X S-Cab ClassicSpace, 2.30 m, tunnel; F6C Tinted windscreen; F6I Heated front mirror; F6J Electrically adjustable main mirror, driver’s side; F7W Single-step cab entry; F8E Central locking; F8L Immobilizer with transponder; F8X Rain/light sensor; G0U Economy driving mode; G1B G 70-6/5.94-0.74 transmission; G5G Mercedes PowerShift 3; I0E Tubeless tires 215/75 R 17.5 front/rear; I4A 4x2 axle configuration; I5Q 7.5-ton vehicle; I6W Leaf suspension, rear axle; J1A 10.4 cm instrument cluster; J1O 2nd generation digital tachograph, ADR; J1S Tachograph manufacturer VDO; J3N Fleetboard Eco Support; J5S Radio with USB port and Bluetooth; J9D Pre-equipment for toll registration; J9N Pre-equipment for Truck Data Center 6 (DTCO); K0E Plastic tank 120 l, left; K3T AdBlue tank 25 l; K5M Lockable tanks; K5S Protective cap for AdBlue dosing system; K7I Exhaust system on right frame, tailpipe inward; L1B Daytime running lights; L1H Halogen fog lamps; M0S Noise insulation to ECE; M1H Engine OM934, inline 4-cylinder, 5.1 l, 115 kW (156 hp), 650 Nm; M5C Engine version Euro VI, D; Q1J Front spring 3.6 t, parabolic; Q2A Rear spring 4.6 t, parabolic; Q8L Crossmember for G135 trailer coupling; R0Z Wheel nut cover; R1A 6.00 x 17.5 tapered rim; S1D Stability Control Assist (ESP); S1H Lane Keeping Assist; S1P Active Brake Assist; S5A Speed limiter 90 km/h / 56 mph, ECE; S5Z Cruise control; S8A First aid kit; S8C Warning triangle; S8D Warning lamp; S8E Warning vest; T0F Weight option 7.49 t (3.6/4.6); U2I EBS control code, 4th generation; U3F Control code, Global AdBlue Sensor (GMS DEF); V1D Atego new distributor; V1W Standard; V2T Atego model generation 1; V6C Minimum equipment for flatbed/box vehicles; V7C Dry freight box body; V8A VIN chassis number; X2E EU type plate; X2T Maintenance documentation; X2Y Registration certificate, Part II, prepared; X3O Mercedes-Benz OnRoadService; Y1C Control for paint tones, solid double-runner; Y1G Cab paint allocation, topcoat line 2; Z3H Side marker lights, 1st position; Z3I Side marker lights, 2nd position; Z4D Inline engine, 4-cylinder. Cargo space dimensions: L 6,060 mm, W 2,450 mm, H 2,520 mm Gross vehicle weight: 7,490 kg Unladen weight: 4,975 kg Payload: ...

Condition: used, mileage: 38,489 km, power: 175 kW (237.93 HP), color: black, gearing type: automatic, total length: 78,500 mm, total width: 25,500 mm, total height: 36,500 mm, loading space length: 60,600 mm, loading space width: 24,800 mm, loading space height: 24,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, power assisted steering, - Air suspension, rear - Air suspension, front Gusdpfx Ajztlrcoqief For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. Mercedes-Benz Atego 824 L platform/tarpaulin + tail lift 6-cylinder engine! Tail lift: BÄR BC 1000 S4-A4 (1,000 kg), A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5S axle ratio i = 3.636, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B5B trailer brake, 2-line system, C2J wheelbase 4220 mm, C5I fastening parts, for platform, C6B steering ZF 8095, C6S stabilizer, for extreme high load, rear axle, C7E front underrun protection (ECE), steel, C7M protection device, lateral, weight-optimized, C8J splash guard, in the fender, C9L extended frame overhang, 200 mm, C9Y omission of rear underrun protection (ECE), D1B driver's air-suspended seat, standard, D1M co-driver's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, plain weave fabric, D4A standard cockpit, D4W window lift, electric, on both sides, D4Y sun visor, lateral, driver's side, D6F air conditioning, D6Y pollen filter, D7A additional thermal insulation, D7L storage compartment, above the windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0E batteries from Banner, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E2J fuse box, E3F additional socket 12 V/15 A, railing, E4B interface, fleet management system FMS, E5A switch no. 1 for external superstructure electrical system, E6A trailer socket 24 V, 15-pin, E6Y reversing warning, combined with hazard warning lights, E7F cable remote control for air suspension, E9H preparation for tail lift control, F1X S-cab ClassicSpace, 2.30 m, tunnel, F5L exterior sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7V cab entry, two-step, F8L immobilizer, with transponder, F8X rain/light sensor, G0U economy driving program, G1D gearbox G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0I tires tubeless, 235/75 R 17.5 front axle, I4A wheel formula 4x2, I6X air suspension, rear axle, J1A combination instrument, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S radio, with USB connection and Bluetooth, J9D preparation for toll collection, J9N preparation for Truck Data Center 6 (DTCO), K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe pointing inwards, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M2A engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M8Z fuel preheating, P0L tail lift preparation, Atego, Q1D front spring 4.0 t, parabolic, Q7B trailer coupling Ringfeder, Q7R trailer coupling G 135, for ZAA, Q8Y cross member, later installation of AHK G135 ZAA, R0Z wheel nut cover, R1B steep shoulder rims 6.75 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5Z cruise control, T0J weight variant 7.49 t (3.8/5.0), X2T maintenance documentation, Z4E in-line engine, 6 cylinders, Z5C OM 936, cargo space

Condition: used, mileage: 21,790 km, power: 200 kW (271.92 HP), axle configuration: 4x4, color: white, driver cabin: sleeper cab, gearing type: mechanical, suspension: air, total length: 80,750 mm, total width: 25,500 mm, total height: 36,850 mm, loading space length: 55,600 mm, loading space width: 24,900 mm, loading space height: 21,900 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number: .Mercedes-Benz Arocs 1827 A 4x4 box body + tail lift Tail lift: BÄR BC 1500 S4-B4 (1,500 kg), side door with steps, A1C front axle 7.5 t, A1W differential lock, front axle, A1Y front axle, straight design, A2G rear axle, crown wheel 300, planetary gears, 13.4 t, A5W axle ratio i = 4.143, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B1Z ABS, switchable, B2B drum brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, C2I wheelbase 4200 mm, C4C frame overhang 2100 mm, C5I fastening parts, for platform body, C6C steering, 1-circuit, C6J steering power pump, unregulated, C6Q stabilizer, front axle, C6Y stabilizer, under frame, rear axle, C7A rear underrun protection (ECE), C7J battery carrier, batteries side by side, D0S compressed air connection, in the cab, D1C driver's air-suspended seat, comfort, D1P passenger's air-suspended seat, comfort, D2M seat back, unlocking, passenger seat, D2N seat back, unlocking, driver's seat, D2W armrests, on both sides, passenger seat, D3B comfort bed, lower, D3S seat cover, leather, driver's seat, D3T seat cover, velour, passenger seat, D4T curtain, transverse in front of bed(s), D6F air conditioning, D6I waste heat recovery system, D6M auxiliary hot water heater, cab, D6Z construction site filter, D7R storage compartment flaps, above the windshield, D8N lifting roof, electric, D9A pre-equipment for comfort bed, upper, wide, E0D battery sensor, from Hella, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N generator 28 V/100 A, E3A voltage converter 24 V/12 V, 10 A, E3L socket 24 V/15 A, passenger footwell, E4C additional functions, for body manufacturer, E5G battery disconnection switch outside, on the frame, E5H switch for night running lights, E6A trailer socket 24 V, 15-pin, E9E pre-equipment ADR, without chassis cover, E9H pre-equipment control for tail lift, F0G side module, N3G vehicle, F0Y mirror cover, construction vehicle, F1W L-cab, StreamSpace, 2.30 m, tunnel 320 mm, F3B cab mounting, comfort, spring-mounted, F3W cab tilting device, mechanical-hydraulic, F4H rear cab wall, without window, F4X storage compartment exterior flap, left, F4Y storage compartment exterior flap, right, F5Y A-pillar trim, F6D windshield tinted, with band filter, F6I front mirror, heated, F7B bumper, corners made of steel, F7D bumper, center part towing eyes, coupling head, F7Y cab entrance left/right, movable, F8E locking system, with central locking, F8F comfort locking system, G0R transmission torque arms, optimized for installation, G1F transmission G 141-9/14.57-1.0, G4E transfer case VG 3000-3W, 1.04 switchable, G5A single-plate clutch, G5H gear shifting, manual, I1G tires tubeless, 12 R 22.5 front axle/front steered axle/rear steered axle, I1H tires tubeless, 12 R 22.5 rear axle, I4B wheel arrangement 4x4, I5A 18-ton vehicle, I6I vehicle production site Wörth, I6W leaf spring suspension, rear axle, J1C instrument panel, 12.7 cm, with video function, J1R tachograph digital, EC, speed, ADR, J1S tachograph manufacturer VDO, J2E radio, with USB connection, J2K speakers, 2-way system, J9A pre-equipment CB radio, 12 V, DIN socket, J9D pre-equipment for toll collection, J9J pre-equipment for reversing camera, K0T main tan Guedpfx Aqoztlpzjijf

Condition: used, mileage: 24,508 km, power: 200 kW (271.92 HP), axle configuration: 4x4, color: white, driver cabin: sleeper cab, gearing type: mechanical, suspension: air, total length: 80,750 mm, total width: 25,500 mm, total height: 36,850 mm, loading space length: 55,600 mm, loading space width: 24,900 mm, loading space height: 21,900 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. .Mercedes-Benz Arocs 1827 A 4x4 box van + tail lift Tail lift: BÄR BC 1500 S4-B4 (1,500kg), side door with steps, A1C front axle 7.5 t, A1W front axle differential lock, A1Y front axle, straight version, A2G rear axle, crown wheel 300, planetary gears, 13.4 t, A5W axle ratio i = 4.143, B1B electronic brake system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B1Z ABS, switchable, B2B drum brake, on front and rear axle, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, C2I wheelbase 4200 mm, C4C frame overhang 2100 mm, C5I fastening parts, for platform body, C6C steering, 1-circuit, C6J steering power pump, unregulated, C6Q stabilizer, front axle, C6Y stabilizer, under frame, rear axle, C7A rear underrun protection (ECE), C7J battery carrier, batteries side by side, D0S compressed air connection, in the cab, D1C driver's air suspension seat, comfort, D1P co-driver's air suspension seat, comfort, D2M seat back, release, co-driver's seat, D2N seat back, release, driver's seat, D2W armrests, on both sides, co-driver's seat, D3B comfort bed, lower, D3S seat cover, leather, driver's seat, D3T seat cover, velour, co-driver, D4T curtain, across in front of bed(s), D6F air conditioning, D6I waste heat utilization, D6M hot water auxiliary heater, cab, D6Z construction site filter, D7R storage flaps, above windshield, D8N lifting roof, electric, D9A pre-installation comfort bed, upper, wide, E0D battery sensor, company Hella, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N generator 28 V/100 A, E3A voltage converter 24 V/12 V, 10 A, E3L socket 24 V/15 A, co-driver footwell, E4C additional functions, for body manufacturer, E5G battery disconnect switch outside, on the frame, E5H night light switch, E6A trailer socket 24 V, 15-pin, E9E pre-installation ADR, without chassis cover, E9H pre-installation control for tail lift, F0G side module, N3G vehicle, F0Y mirror cover, construction vehicle, F1W L-cab, StreamSpace, 2.30 m, tunnel 320 mm, F3B cab mounting, comfort, steel-sprung, F3W cab tilting mechanism, mechanical-hydraulic, F4H cab rear wall, without window, F4X storage compartment outer flap, left, F4Y storage compartment outer flap, right, F5Y A-pillar trim, F6D windshield tinted, with band filter, F6I front mirror, heated, F7B bumper, corners made of steel, F7D bumper, middle part towing eyes, coupling jaw, F7Y cab entry left/right, movable, F8E locking system, with central locking, F8F comfort locking system, G0R transmission torque arms, optimized for assembly, G1F transmission G 141-9/14.57-1.0, G4E transfer gearbox VG 3000-3W, 1.04 can be engaged, G5A single-plate clutch, G5H gearshift, manual, I1G tires tubeless, 12 R 22.5 front axle/steered front axle/non-steered rear axle, I1H tires tubeless, 12 R 22.5 rear axle, I4B wheel formula 4x4, I5A 18-ton vehicle, I6I vehicle production plant Wörth, I6W leaf spring suspension, rear axle, J1C combination instrument, 12.7 cm, with video function, J1R tachograph digital, EC, speed, ADR, J1S tachograph manufacturer VDO, J2E radio, with USB connection, J2K loudspeakers, 2-way system, J9A pre-installation CB radio, 12 V, DIN socket, J9D pre-installation for toll collection, J9J pre-installation for reversing camera, K0T main tank, left, K3V AdBlue tank 60 l, left, K5 Guodpfx Aqoztlpujisf

Condition: ready for operation (used), Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation. Gsdpfjiquuvex Aqieuf