Used Distribution Cast Resin Transformer for sale (4,912)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Hjdpfxoyfvwbo Ac Ijnt Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: new, Year of construction: 2026, CORMAK TH410S Thickness Planer with Spiral Cutter Head The CORMAK TH410S thickness planer with a spiral cutter head is an advanced woodworking machine designed for professional users who require maximum precision, durability, and operating comfort. The spiral cutter head equipped with 72 replaceable carbide inserts provides exceptional surface quality, significantly quieter operation, and lower consumable wear compared to traditional straight knife cutter heads. Main advantages of the CORMAK TH410S thickness planer with spiral cutter head Spiral cutter head with 72 inserts – ensures smooth cutting, reduces vibration and noise by up to 50%, and provides significantly longer service life compared to conventional straight knives. Replaceable carbide inserts – individual segments can be rotated or replaced when worn or damaged, reducing operating costs. Ground cast iron table – provides optimal material sliding and stable workpiece guidance. Three feed speeds – allows adjustment of the processing speed according to the type of wood and production requirements. Digital height indicator – enables precise thickness adjustment with accuracy up to 0.1 mm thanks to the indicator mounted on the handwheel. Chain drive system – ensures smooth and precise material feeding through the machining zone. Advanced safety features – compliance with occupational health and safety requirements and technical documentation standards ensures safe operation. Design and technology The CORMAK TH410S thickness planer is based on a robust steel and cast iron construction, providing high rigidity and resistance to vibration. The 95 mm diameter spiral cutter head is equipped with 72 carbide inserts arranged in a spiral pattern, ensuring continuous cutting and eliminating the risk of tearing wood fibres, even when processing hard and resinous wood species. The extraction and sound-insulating cover provides quick access to the cutter head and simplifies maintenance operations. Precision and working efficiency With a planing range from 5 to 230 mm and a working width of 410 mm, the machine enables processing of both thin boards and thick structural elements. The cutter head speed of 4050 rpm and powerful 3.0 kW (S1) motor ensure high performance even during intensive operation. The use of a spiral cutter head allows achieving a high-quality surface finish without the need for additional sanding, significantly reducing preparation time before further processing. Standard equipment Spiral cutter head with 72 carbide inserts Digital thickness adjustment indicator Feed drive with chain transmission Extended table with support rollers Sound-insulated dust extraction cover Complete safety guards compliant with technical documentation and workplace safety standards Technical specifications Parameter Value Thickness planing width 410 mm Thickness adjustment range 5–230 mm Hjdpfxjx Dlp Aj Ac Ijnt Planer shaft diameter 95 mm Number of knives (spiral inserts) 72 pcs Planer shaft speed 4050 rpm Feed speed 6 m/min Dust extraction connection Ø100 mm Motor power 4.2 kW Motor power S1 100% duty 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 263 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table size – width 930 mm Table size – depth 410 mm

Condition: used, This listing is for a Millipore AFS 15E Water Purification System with 60l Tank. The unit is in full working condition and is ready for immediate release. The Millipore AFS 15E is designed to deliver high-quality Clinical Laboratory Reagent Water (CLRW) efficiently and economically, making it essential for laboratories that adhere to rigorous standards. Key Features: CLRW Compliance: Produces water that meets the Clinical and Laboratory Standards Institute (CLSI) guidelines, ensuring reliability in clinical settings. Elix® EDI Technology: Utilizes advanced electrodeionization (EDI) for low and predictable operating costs, coupled with self-regenerating ion exchange resins that reduce maintenance. Data Monitoring: Equipped with full monitoring capabilities, the system archives water quality data for up to six months, allowing for easy tracking and compliance verification. Hjdpfsxxy Szex Ac Ijnt Feed Water Quality: Accepts potable water with a pressure range of 1–6 bar and a temperature range of 5–35°C, ensuring versatility in various setups. Storage Capacity: Comes with a 60L tank, providing ample storage for the purified water, which is crucial for laboratories with high water demands. Specifications: Production Capacity: Generates up to 300 litres of water daily, catering to high-throughput needs. Production Flow Rate: Delivers water to the reservoir at 15 L/h. Distribution Flow Rate: Dispenses water to analysers at up to 2 L/min, ensuring quick access when needed. Product Water Quality: Resistivity at 25°C: > 15 MΩ·cm, indicating high purity. Total Organic Carbon (TOC): < 30 ppb, suitable for sensitive analytical applications. Dimensions: Compact size of 585 x 268 x 426 mm (23 x 10.6 x 16.8 in) enables easy integration into laboratory spaces.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Hnjdpfx Acexy Idhe Ist

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations Hedpfeyx Dfnox Ac Ijnt -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, Hjdpfxeyy Nl No Ac Iont processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: excellent (used), Mobile - for transport by hooklift. Hedpfx Aov Snc Esc Iont 400V power supply 37kW main engine 2 receiving belts Hydraulically foldable deflector arm

Condition: good (used), Mains choke, mains filter, frequency converter, drive converter, transformer -Manufacturer: Siemens, mains filter mains choke Simodrive -2-phase choke 36KW: 6SN1111.0AA00-0CA -Mains filter: 6SN1111-0AA01-2CA0 Hjdpfswcywbox Ac Ijnt -Adapter set: 6SN1162-0GA00-0CA0 -Distribution/Price; complete -Dimensions: 580/250/H310 mm -Weight: 41.6 kg

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm Hedpfx Aoxbyltsc Iont -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Condition: used, Year of construction: 2012, machine/vehicle number: A0100-80069, functionality: fully functional, operating hours: 4,660 h, Equipment: documentation/manual, We are offering this used Hennecke ELASTOLINE F elastomer casting machine, year of manufacture 2012. The machine is in good used condition. If you have any questions or require further information, please write to us or give us a call. Hnsdpfxsx R Thco Ac Ijt

Condition: new, Self-propelled concrete distributor. Hopper capacity: 2 m³, 3 m³, and 4 m³ (other sizes also available). Various options available, such as closed cabin, reversing camera, fully enclosed covers for the concrete auger, and slide valve. More information available on request. Hnodpfx Acex Ap Awe Iet

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY VM1050H FANUC 0IMF1 VERTICAL MACHINING CENTRE YEAR OF MANUFACTURE - NEW - BUILT 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS AIR GUN SPINDLE AIR BLAST SPINDLE PROTECTION AIR CURTAIN 24 STATION ATC TOOL MAGAZINE CHAIN TYPE CHIP CONVEYOR WITH CHIP BOX Hsdpfx Ajxtfxcsc Iont FANUC 0IMF 1 WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY MANUAL PULSE GENERATOR (MPG) COOLANT FLUSHING SYSTEM COOLANT GUN FRONT DOOR INTERLOCK FULLY ENCLOSED SPLASH GUARDING SYSTEM TELESCOPIC SLIDEWAY COVERS LED WORKING AREA LIGHTING SYSTEM PATROL LIGHT (3 COLOUR) AIR CONDITIONING IN ELECTRICAL CABINET BASIC MACHINE INSTALLATION PARTS CE STANDARDS MACHINE CONFIGURATION CENTRALIZED AUTOMATIC LUBRICATION SYSTEM MACHINE MANUALS & OPERATOR HANDBOOKS STANDARD ACCESSORIES TRANSFORMER (415V, 3PH, 50HZ) BELT DRIVE SPINDLE - 8,000 RPM #40 TAPER WITH OIL COOLER SPINDLE MOTOR FANUC 11.0 / 15.0 KW MACHINE TYPE, CONSTRUCTION & FEATURES  HEAVY DUTY CAST IRON CONSTRUCTION  COMPACT DESIGN  PRE-LOADED BALLSCREWS  HIGH PERFORMANCE LINEAR GUIDEWAYS – X / Y / Z MACHINE SPECIFICATION Worktable Travel (X Axis) 850 MM Saddle Travel (Y Axis) 520 MM Spindle Travel (Z Axis) 560 MM Distance from Spindle Nose to Worktable 150 ~ 710 MM Distance from Spindle Centre to Column 580 MM FEEDRATES X Axis Rapid Traverse Rate 36 M / MIN 3 | Page Y Axis Rapid Traverse Rate 36 M / MIN Z Axis Rapid Traverse Rate 36 M / MIN Cutting Feed Rate 10 / 10 / 10 M / MIN ACCURACY Positioning accuracy (X / Y / Z) 0.008 / 0.008 / 0.008 MM Repeatability (X / Y / Z) 0.005 / 0.005 / 0.005 MM WORK TABLE Table Size 1,000 x 520 MM Max. Table Load 650 KGS T-Slots - Width 18 MM SPINDLE HEADSTOCK Tool Shank BT40 [BBT40] [CAT40] Pull Stud P40T-1 (MAS403) Spindle Speeds 8,000 RPM Max. Output Torque 70.0 / 96.0 NM Spindle Motor Power 11.0 / 15.0 KW AUTOMATIC TOOL CHANGER Number of Tools 24 Tool Shank BT40 Max. Tool Dimensions Ø 80 x 300 MM x 8.0 KGS Tool Exchange Time 1.5 SEC MISCELLANEOUS Power Requirement 25 KVA Power Supply 415V / 3PH / 50HZ Compressed Air Consumption / Pressure 280 L / MIN / 6 ~ 8 BARS Machine Dimensions (L / W / H) 3,680 x 2,480 x 2,850 Machine Weight 5,500 KGS

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 2,700 kg, total height: 560 mm, total width: 2,200 mm, total length: 5,600 mm, Repair frame, professional sheet metal plate TM-GROUP B700 4 TON ⭐️COMPLETE WITH A SET OF NECESSARY ACCESSORIES⭐️ Sheet metal plate specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 3.6 tons ✅ Power supply: hydraulic power ✅ High quality hydraulic pump ✅ Max hydraulic pressure: 70 Mpa ✅ Frame length: 5600 mm ✅ Frame width: 2200 mm ✅ Frame height: 520 mm ✅ Plate thickness: 12 mm ✅ Compressed air pressure: 0.8 MPa ✅ Maximum pulling force: 100 kN ✅ Working range of the tower column: 360 ° ✅ Lifting range of the lifter: 680 mm - 1950 mm ✅ Solid and easy car attachment ✅ Frame includes a scissor lift ✅ Universal for all post-accident repairs - The platform is solid and its panel is created in one process thanks to precise CNC cutting - without deformation and with smooth edges. - All elements are shot-blasted, which eliminates welding stress, strengthens the surface and improves paint adhesion. - The platform is made of high-quality steel sheet, welded in a CO₂ shield, which ensures its strength and rigidity. It has numerous process holes and an ergonomically placed anchoring mechanism. - The tower rotates 360 °, works smoothly and precisely. The cylinder works vertically, providing high force and accuracy. - The hydraulic system is characterized by high power, durability and low failure rate. - Optional high-precision measuring systems are available, containing data on car bodies and instructions for easy vehicle maintenance. - The strong chain (T8) and 45# forged tools are versatile, comfortable and durable. - Reinforcing elements such as the tower guide ring and the base of the equipment are made of a single casting, which ensures even distribution of forces and resistance to deformation. - The equipment allows for precise vehicle fixation, and additional accessories are available for brands such as Mercedes-Benz, BMW, Volvo, Renault and others. ⭐️Scissor lift included!⭐️ Jack specifications: ✅ Maximum weight: 3000 kg. ✅ Maximum height: 950 mm. ✅ Minimum height: 185 mm. ✅ Maximum external dimensions: 2060-1050 mm. ✅ Jack lifting range: 680 mm - 1950 mm. ✅ Power supply voltage: 110 V/220 V-S0 Hz. Hnjdpfx Aevx N E Usc Ijt ✅ Device weight: 400 kg. - Equipped with a small trailer that allows easy transport of the lift. - The armrest is flexible, and there are three types of supports available, allowing it to be set at different heights. - Self-locking safety device, unique design, simple operation, safety and reliability. - Suitable for dismantling tires and repairing chassis of small and medium-sized delivery vans and passenger cars. ‼️ IT IS POSSIBLE TO PURCHASE A FRAME WITH A DIFFERENT NUMBER OF DOZERS / TOWERS ‼️

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Hodpfxeziwuno Ac Ient Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. Hjdpfjfiulfex Ac Ijnt NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min Hodpfxszv Ul Rs Ac Ijnt spindle taper ISO 40 SK quill stroke 127 mm table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Hjdpfx Ajxabiqjc Iont Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: used, Year of construction: 2016, input voltage: 400 V, protection type (IP code): IP20, We offer these used electrical switchboards: ABB MNS 14 (year of manufacture 2016), Harju Elekter HEPO 31389 (year 2000), Harju Elekter HE 24840 (year 1999), SZMA RIGA, and others. A total of 50 switchboards, all were operational until dismantling. Stored in a heated warehouse. Hodpsymxwtofx Ac Iont Manufacturer: ABB, Harju Elekter Model: MNS 14, HEPO 31389, HE 24840 Year of manufacture: 2016-1999 Voltage: 230/400V, IP20, 400-630A Condition: used

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €8,340.34 / Gross price: €9,925.00 Article number: A3T235552100.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 0 cm • External dimensions (LxWxH): 722 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 915 kg • Payload: 2,585 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra-low loading height of 520 mm • Very stable steel frame, welded • Vehicle can be fitted with all options after purchase: enormous potential for retrofitting: Hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading platform made of durable and robust phenolic resin laminated wood with a non-slip surface. • Front floor storage box, lockable with spring-supported lid • Pattern of holes for securing straps made of galvanized steel Hsdjzy A Hdepfx Ac Ient • Numerous lashing points and a high-load-bearing floor offer flexible securing options as well as perfect grip. • Side panels, color: red • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) ramps (2000 mm) ensure an extremely shallow approach angle • Fold-out, spring-supported support feet complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrunning device and parking brake • Towing head made of steel casting with integrated high-security ALKO lock • Very stable V-shaped drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable, and reliable. • Robust protection of the taillights • Integrated rear fog light • Support wheel in the middle • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Hsdpszy A Nxjfx Ac Isnt Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €7,865.55 / Gross price: €9,360.00 Article number: A3T235502100.01 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 500 x 210 x 0 cm • External dimensions (LxWxH): 672 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 855 kg • Payload: 2,645 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low frame design enables an extra low loading height of 520 mm • Very stable, welded steel frame • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and robust phenolic resin plywood with an anti-slip surface. • Front floor storage box with lock and spring-assisted lid • Pattern of holes for wheel tracks made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible lashing options as well as perfect grip. • Side panels color: black • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) loading ramps (2000 mm) ensure an extremely flat loading angle • Fold-out, spring-assisted support legs complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When unfolded, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse driving automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • Large LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net: €5,693.28 / Gross: €6,775.00 Article number: A3T227451900.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 450 x 190 x 0 cm • External dimensions (LxWxH): 620 x 229 x 69 cm • Loading height of the floor: 52 cm Hjdjzy Auhepfx Ac Isnt • Permissible total weight: 2,700 kg • Unladen weight: 755 kg • Payload: 1,954 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra low loading height of 520 mm • Very stable steel frame, welded • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and resilient phenolic resin laminated wood with an anti-slip surface. • Front storage box with a spring-assisted lid • Pattern of holes for securing load made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Side panels color: red • Frame completely hot-dip galvanized • Easily extendable, roller-bearing ramps (2000 mm) ensure an extremely flat approach angle • Fold-out, spring-assisted support feet complement the extendable ramps. Can be folded in and out within seconds with your foot • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Hodpezzairsfx Ac Isnt Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 Hjdpfx Aswnhxdec Ijnt - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, NEW Electric heat plates suitable for most electric Teflon band grills (contact grills) such as GEA, CFS, Koppens, Square, etc ... in casted aluminium dimensions : 590 x 600 x 67 mm 15 kW - 3 x 400 V - 50 Hz stainless steel connection hood Hsdpfx Acjzy Nwce Ijnt stainless steel attachments

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Hnedpfx Acsziwplo Iot Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.