Used Econ Pyrolysis Furnace for sale (1,208)

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 Pedpeclupdjfx Aprspt electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Ppsdpfx Asxcybksprot Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Pedpfxed I T Exo Aprjpt For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Ppodpfx Apeym U Sgerjt Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Pjdpfx Apoyfv N Reropt

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Ppodpoxp Rbhsfx Aprst

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Ppjdjvxvgrspfx Aprst

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Podpfxowkiips Apropt

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Psdpfx Aow Igvteprept

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Ppedpfx Apoxt Rmljrst

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Psdoygw S Aopfx Aprspt

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Psdpfx Apex Sywgorjpt

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Pjdpfxsw Emyzs Apropt

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Pedjtxb Avepfx Aprjpt

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Psdpfx Apjtxb Aperspt

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Ppjdpfx Apstndwuerst

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Pjdpsxcb Hnsfx Aprept Max temperature: 1000°C

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Podehz D Iwjpfx Aprspt MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace Ppjdpfxsylaqls Apret TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Ppedpspcgzgsfx Aprot

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Ppsdpoifpuaefx Aprst

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Pedpfjq Ttz Eex Aprjpt

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Ppsdpfx Aoik E Sroprjt Min. glass size: 200 x 400 mm Glass thickness: 4 - 19 mm Start-Up: 2018

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm Ppsdoipx Dyepfx Apret KW: 814,5 Dimensions: length = 22 m, width = 7 m

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° Podpfjw Nnqusx Aprspt MARCELS MASCHINEN AG