Used Fod Dppa-50 for sale (33,235)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) Itedpfx Aey R Npcsb Sog To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Nilma salad spinner in as new condition. 5-8 kg per cycle with a 1-2 minute cycle time Iedpfx Aboy Hqanj Setg

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. Iodpjxmag Usfx Ab Sotg max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors Itsdpfxsx Urn As Ab Ssg - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Itodpjym D Ahjfx Ab Seg Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Itjdey R Akmjpfx Ab Ssg

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Itsdpfx Abjy R Admj Seg

Condition: used, Year of construction: 2001, Industrial cooling lubricant or oil cleaning system Belt filter system for cleaning cooling lubricants with cooling unit The system is a centralised system for cleaning and processing cooling lubricants or oils used in metal-cutting production (e.g. grinding, milling, turning) It combines mechanical filtration (belt filter), liquid storage and temperature control by means of an integrated cooling unit. General information Machine type: Centralised system for cooling lubricant preparation Filter unit manufacturer: KNOLL Maschinenbau GmbH, Bad Saulgau Iedsy S D E Uepfx Ab Sjtg Type: PF160 / 200 Year of manufacture: 2002 Reference number: 80.0917 Manufacturer cooling unit: HYFRA Industriekühlanlagen GmbH, Krunkel Type: TRK 50 EF-SS Serial number: Chiller year of construction: 2001 2. technical data - chiller (HYFRA TRK 50 EF-SS) Cooling capacity: 2000 W Max. Ambient temperature: 37 °C Permissible operating overpressure: 29.5 bar Refrigerant: R 407c Voltage: 3~ / PE / 400 V Frequency: 50 Hz Max. Operating current: 5.9 A Connected load: 3.3 kW Water filling weight (total): approx. 160 kg 3. function & area of application The system is used for centralised cleaning, cooling and recirculation of cooling lubricants or grinding oil in metal-cutting operations. It consists of a belt filter module (KNOLL PF160/200) for the filtration of solids and chips, a cooling unit (HYFRA TRK 50 EF-SS) for temperature control of the liquids Translated with (free version)

Condition: used, Colour: Grey - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 Itodpfx Abswh Nuyj Sog - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) Iodpfx Absyh Amlo Sjtg - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Itsdpewvht Refx Ab Sog Type: HUR 50 Year: 2015

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø Iodpfx Abev Dia Ae Setg 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Isdpfxeyrdplo Ab Sotg Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Iedpfsyub Spsx Ab Setg Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Itsdpfsx Sx D Sex Ab Ssg Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Iodpfx Ajwq Rkueb Sjtg Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Iodpfxoy Sidvo Ab Setg

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm Ijdpfx Asyw Titob Sstg change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h - incl. div. cutting inserts, milling cutters, mounting aids

Condition: used, functionality: fully functional, machine/vehicle number: 516329B00051, Year of construction: 2011, operating hours: 5,347 h, load capacity: 5,000 kg, lifting height: 4,670 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,330 mm, fork carriage width: 1,300 mm, fork length: 1,600 mm, empty load weight: 9,080 kg, total length: 2,700 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift Chassis number: 516329B00051 Load center: 500 Fork width: 130 mm Itodpfxsy Scrto Ab Seg Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Front tire size: 28x12.5-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 21x8-9 Rear tire condition: 40 - 60% Battery voltage: 80V Battery year of manufacture: 2011 Battery condition: 40 - 60% Side shifter, 3rd valve, 4th valve, working lights at the front, half-cab, windshield wiper,

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW Itjdpfx Abjy R Rvwe Sog * Incl.: springs and springsupport. * Stock: 1 piece.

Condition: new, HOERBIGER MSV322BE06P Id-No.: HV03115 50/11 B4 directional seat valve, unused in original packaging, 100% functional, delivery as shown in the photos. Iodpsy Srpnjfx Ab Sotg

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Itjdpfx Aboy Ic Dus Sog Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine Iedpjb A Ncrefx Ab Sotg -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 Itodpfx Aoxvyymeb Seg - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900

Condition: used, mileage: 263,889 km, power: 130 kW (176.75 HP), first registration: 12/2018, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 6,950 mm, total width: 1,990 mm, total height: 2,650 mm, loading space length: 3,970 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2018, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Reversing camera - Lane departure warning system - Fabric - Blind spot sensor - Partition wall = Notes = Configuration: 4x2, twin rear wheels, unladen weight: 2,524 kg, gross weight: 3,500 kg, tow bar, cab type: single cab, cruise control, air conditioning, number of airbags: 2, parking assistance: front and rear, electric windows, electric mirrors, partition wall, radio/cassette, Carplay, GPS navigation, color: white, maintenance manual, heated mirrors, reversing camera, lighting: LED lamp, lane departure warning, air conditioning, seat heating, Bluetooth, blind spot sensor, engine power: 130 kW (174 hp), fuel: diesel, Euro 6, drive technology: timing belt, transmission: manual, gears: 6, power steering, ABS, ASR, starter battery, sidewall paneling, rear step, roof rack: none, side doors: 1, rear closure: double door, central locking, seats: 2, seating arrangement: 1+1, upholstery: fabric, seat adjustment: manual, L4H3, twin rear wheels, air conditioning, navigation, parking sensors, LED, tow bar, spare wheel, tire type: summer tires = More Information = General Information Number of doors: 1 Itsdpfx Aeymlbfsb Seg Registration number: KLEYN1 Axle Configuration Tire size: 205/75R16 Brakes: disc brakes Axle 1: left tire tread: 4 mm; right tire tread: 5 mm; suspension: coil spring Axle 2: twin tires; left inner tread: 5 mm; left outer tread: 5 mm; right inner tread: 5 mm; right outer tread: 5 mm; suspension: leaf spring Weights Unladen weight: 2,524 kg Payload: 976 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 65 cm Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 2 Financial Information Lease price: €257 per month (panel van, 72 months); Please ask for more information and conditions.