Used Goldhofer Stz-Vls4-37/80 Tiefbett + Sx 1-25/80 Dolly for sale (91,648)

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: Itjdsyhkqnopfx Am Esf * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: used, mileage: 120,799 km, power: 210 kW (285.52 HP), first registration: 10/2010, fuel type: diesel, empty load weight: 15,650 kg, maximum load weight: 10,350 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,850 mm, next inspection (TÜV): 01/2020, brakes: engine braking, color: white, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, seat heater, * German vehicle * 1st hand * 2 x available * Original only 120,799 km * Checkbook maintained * Faun Easypress 525 front loader * Loading arm swivels sideways * Waste collection container with press * 25 m³ collection container volume * Graf-Syteco control panel with joystick * Camera system * Rear cab wall with window * Air conditioning * Comfort driver's seat, air suspension * Seat heating * Electric windows * Heated electric mirrors * PARKING BRAKE * Engine brake * Speed limiter * Telephone preparation * Radio CD * Liftable trailing steering axle * Leaf/air suspension + raise/lower * Allison automatic * Differential lock * Beka Max central lubrication * Roof hatch * Wheelbase: 3,850 + 1,350 mm * Max. GVW: 26,000 kg * Payload: 10,350 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Iedpfsvhpf Hex Am Eotf We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time. Itedpetv Rlbefx Am Ejf

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Iedporx S Hnofx Am Estf Under power, can be inspected any time

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Itedjx Srphepfx Am Esf

Condition: ready for operation (used), Lenze / Schneider Electric SX-1/21/0/2/8 m LED L1 card 51130049 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Iodpfxjpf Aq Ts Am Eetf

Condition: ready for operation (used), Baldor BSM1R-0.2-40-B5 servo motor. 16724A, SN:BEDBDA2606 + Gysin GPL 52-2S / 25:1 planetary gear, used, normal signs of use, 100% functional, scope of delivery as per photos Itodpfoi D E Aqsx Am Eof

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm Itjdpfxeu R S Dbo Am Eof - new exhibition machine -

Condition: ready for operation (used), Demag DCS-Pro 1 80 1/1 H3 VS30-30 chain hoist / crane SN: 94828902 - load capacity: 80 kg / control cable length: 2.00 m - chain length: 1.40 m, used, in good condition, fully functional, delivery as per photos. Itsdpfxox Eq Hlo Am Eof

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. Ijdpfxjvwlqqo Am Eetf The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Itsdpfxjvxh Ius Am Eof Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: new, Elau SX-1/22/1/0/8 m FB1 SV 5.13 L1 Card Id. 11130135 SN:911297.0010, unused in opened original packaging, 100% functional, scope of delivery as per photos Iodpfx Asv E Tuaom Ejtf

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Itsdpfshwd E Nex Am Eof Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Iodpfx Asvrh Rcjm Eetf Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2005, AMADA - HFT 80-25 - 2005 Itsdpfx Aoytrwtom Ejf - 80 t capacity - 2500 mm table - stroke 200 mm - weight 5750 kg - under power - used machine, good condition

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Itedpfx Amjxvh Hbe Eef Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm With attached control cabinet according to VDE 0100 With main switch Synchronous welding control MPS 15036

Condition: used, mileage: 121,000 km, power: 70 kW (95.17 HP), first registration: 09/2017, fuel type: diesel, overall weight: 2,420 kg, next inspection (TÜV): 09/2025, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 74 – You can find this and many other transporters on our website: ----Fiat Doblo Maxi with 3 seats. The vehicle comes from first ownership (roofer). The vehicle is wrapped in grey. Inspection/emissions (TÜV) expired 09/2025. Last service at 106,000 km (09/2024). Bott roof rack as well as Bott shelving and drawers installed in the cargo area. ----Permissible gross weight: 2,420 kg Unladen weight: approx. 1,460 kg Payload: approx. 960 kg Towing capacity: 1,000 kg Emission standard: EURO 6 Wheelbase: 3,105 mm VIN: ZFA26300006G86534 2 keys ----* Fiat Doblo Maxi from first owner * 3 seats * Bott roof rack * Bott shelving and drawers in the cargo area * Air conditioning * Hands-free system * Driver and passenger airbags * Electric windows Itjdpfxox R Ru To Am Esf * Electrically adjustable and heated exterior mirrors * Central locking * and much more ----Subject to errors, changes, and prior sale. Special equipment: External temperature display, infotainment system: UConnect (5" touchscreen), multifunction steering wheel for audio control, full-size spare wheel, front 12V socket Further equipment: Overhead storage compartment, driver/passenger airbag, traction control (ASR), electrically adjustable and heated exterior mirrors (both sides), partially painted exterior mirrors, electronic brakeforce distribution, driver assistance: hill start assist, driver assistance: brake assist, lockable glovebox, rear wing doors without windows, body type: panel van, cargo partition wall, cargo area sound insulation, height-adjustable steering column, 1.3 L 16V M-Jet engine 70 kW, engine drag torque control (MSR), radio pre-installation, 4 speakers and roof antenna, wheelbase 3,105 mm, hubcaps / full wheel covers, low emission according to Euro 6 standard, reinforced front disc brakes, right sliding door, rear side windows in load/passenger area sheeted (3rd row), height-adjustable driver’s seat, steel wheels 6.5x16, storage compartment under right front seat, 12V socket in dashboard, 12V socket in trunk/cargo area, interior trim for cargo compartment.

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Itedpfx Asxgi Etsm Eef Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Itsdpfoxg H Hbsx Am Esf Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, table width: 60 mm, working width: 2,500 mm, TECHNICAL DETAILS Pressure: 80 t Bending length: 2,500 mm Table width: 60 mm Working height: 960 mm Itsdpfx Amowmdf Do Eof Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Weight Machine weight approx.: 5,000 kg

Year of construction: 1995, condition: good (used), welding machine Branson HP 25/15-1, year: 1995 , price: 4.900 €, contact: Mr. Rainer Eckerle Iedodzngfepfx Am Eotf

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Itsdevncifspfx Am Ejf Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

Condition: used, Technical data: Iedpfx Aox Eadwsm Eotf Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 130 mm Manual feed Power supply: 380 V Total power: 0.55 kW Overall dimensions: Length: 1670 mm Width: 950 mm Height: 1600 mm

Condition: new, Technical data: Saw blade diameter: 500 mm Automatic saw feed Max cutting height: 120 mm Table length: 2540 mm Table width: 360 mm Table with 8 built-in rollers Roller diameter: 60 mm Mitre cutting capability: NO Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 2540 mm Width: 900 mm Itjdpfewya Hqex Am Esf Height: 1340 mm

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Ijdpjmi Rpiofx Am Eetf 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t