Used Grating Perforated Sheet Step for sale (13,152)

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Fgedpfxjykuhpo Aggeg F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, Description High-quality hydraulic shear in excellent working condition, equipped with sharp blades and a full annual maintenance history. The machine offers reliable cutting performance, strong build quality, and a wide range of productivity features suitable for demanding sheet-metal workshops. Key Features Sharp blades – ready for immediate production Annual maintenance completed Cutting strokes: 10–35 strokes/min Back gauge range: 10–1000 mm Motor power: 15 kW Programmable motorized back gauge 1.5 m side gauge 1.5 m front support Shadow line light & shadow light beam Automatic hydraulic clamps Centralized greasing system Foot switch control Cycle counter Automatic shearing contacts on back fence Blade gap and tilt angle adjustment Front flip stops Adjustable stroke Fedexw R Ttjpfx Aggsgg Working channel Hour meter Self-diagnosis system Control STEP AUTOMATION EASY CUT control unit for fast programming and accurate setup Technical Specifications Dimensions (L × W × H): 4600 × 2200 × 2200 mm Max. cutting thickness: 8 mm Max. cutting thickness: 6 mm Working hours: 40,347 Cutting length: 4,000 mm Machine weight: 10,100 kg Main motor power: 5.5 kW

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. Fedpezdyh Hefx Aggjgg The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) Fgsdpfx Aex D E Hujggeg • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information The equipment is in like-new condition because the project for this purchase never machine has a maximum of 200–300 operating hours. We’ve only conducted some test runs and the like here. It hasn’t been used in series production for specific projects. So it’s basically in “like-new” condition.A Touch Sense Cap has also been integrated for the UR 10e robot. The interface is Ri Mod. The welding machine is equipped with: Welding Package Standard, Pulse, PMC, CMT, Cycle Step, and WireSense This allows for welding of all weldable (arc) materials. Seam detection can be performed via gas nozzle position, wire end, and can be programmed both as a collaborative robot and via the control UR 10e robot has a programming interface called “Weld Control UR Cap.” The individual caps are based on this robot software and were created by OH-au2mate.

Condition: good (used), Year of construction: 2003, functionality: fully functional, color channels: 4, total length: 3,860 mm, total width: 1,470 mm, Equipment: documentation/manual, Plus Version: prepared for numbering & perforating unit Perfecting 2:2 Classic Center Powder sprayer Electronic double sheet detector New rollers VARN Kompac III The Heidelberg GTO 52-4-P3 is a professional four-color small-format offset printing press, renowned for its reliability and precision in commercial job printing. This model features an integrated perfecting system, allowing for double-sided printing of sheets in a single pass. Fgedpoy Efqlefx Aggjg Key Technical Specifications Max. sheet size: 360 x 520 mm (B3 format) Min. sheet size: 105 x 180 mm (one side) / 140 x 180 mm (both sides) Printing speed: Up to 8,000 sheets per hour Substrate thickness: 0.03 mm to 0.4 mm Colors: 4 printing units Plus Version: This machine is designed as a "Plus Version," which includes preparation for additional numbering and perforating units (N+P). Control: Equipped with the Classic Center for central control of ink supply and register.

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic Fgodpfjzlytlox Aggeg - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 20086, mileage: 178,460 km, first registration: 01/1991, fuel type: diesel, axle configuration: 2 axles, fuel: diesel, color: white, gearing type: automatic, suspension: steel, Year of construction: 1991, Equipment: sliding door, For sale: a 1991 Chevrolet Step Van from Grumman Olson. The vehicle is equipped with a 6.2L V8 OHV 16V diesel engine. Mileage: 178,460 miles. The rear door opens easily. The overall condition is good. Fgsdpfx Agozk Ib Isgog The vehicle is sold as is, with a US title. A data sheet must be obtained separately, as it is required for registration in Germany. If you have any questions, please contact us by email or phone, quoting the internal number 20086.

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Fjdpfxszqz T Ds Aggjgg Item 1 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Fedpezmtqaofx Aggegg Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Spill containment sump, storage pallet for hazardous substances Type 4P-TCF Wash table with grating Manufacturer number: 80027720 Year of manufacture: 1997 Containment volume: 1000 liters Fsdpfx Aoxf Uv Isggsgg Load capacity: 2000 kg with even load distribution - Sump made of steel sheet (1.0038) - Official approval mark: LUA NRW-19h-95/14.0.0 - 3-piece hot-dip galvanized grating - Forklift pockets: 295 x 95 mm Overall dimensions (L x W x H): 1360 x 1250 x 925 mm Net weight approx. 180 kg Good condition

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Fedpszd Ulaofx Aggogg Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops Fodpfx Agozf Nk Togsgg • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fodpfozh S Ugox Aggjgg Fixed delivery desk with adjustable air nozzles.

Year of construction: 2016, condition: used, Year: 2016 Fgsdpfx Agszuzd Rogeg Condition: good Counter: approx. 3,340,000 Configuration: - Creasing tool - Perforating tool, 11 TPI - 2 × perforating heads, 11 TPI Technical Specifications: - Feeder: suction belts - Feeder pile height: 180 mm - Minimum sheet size: 105 × 148 mm - Maximum sheet size: 375 × 660 mm; 375 × 1,050 mm with table extension - Paper weight – perforating: 80–300 gsm or max. 0.3 mm - Paper weight – creasing: 80–400 gsm or max. 0.4 mm - Maximum speed: 5,000 A4 sheets/hour Perforating - Maximum number of operations: 20 per sheet - Minimum spacing: 3 mm - Number of tools: 1 perforating tool Creasing - Maximum number of operations: 20 per sheet - Minimum spacing: 1 mm Multigraf Touchline CP 375 MONO is designed for perforating and creasing sheets with paper weights of up to 400 gsm. The machine is equipped with perforating tools for crosswise and longitudinal perforation in a single pass. Thanks to its interchangeable tools, the new Touchline CP 375 MONO can be quickly converted from a creasing machine to a perforating machine or vice versa at any time. The cross-perforating bar can be replaced with a creasing bar, allowing cross creasing, longitudinal perforation and partial longitudinal perforation in a single pass through the machine. Machine setup, including perforation, is fully automatic via the touchscreen. Sheet feeding is automatic and uses suction belts, and the machine can be equipped with double-sheet detection.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Fodpfsv Nwgnjx Aggogg Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator Fgodpozlpahjfx Aggeg - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Saddle compartment, front exit Equipment: - Aluminum walls - Aluminum floor - Ramp/door combination Net price: €8,554.62 / Gross price: €10,180.00 Article number: CTCA2611111.01 Technical data: • Brand: Cheval Liberte • Model: Touring Country • Vehicle type: Horse trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 320 x 167 x 230 cm • Exterior dimensions (L x W x H): 447 x 215 x 268 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,600 kg • Unladen weight: 900 kg • Payload: 1,700 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Pullman2 chassis with single-wheel suspension and coil spring Fgedpfozugirsx Aggog • Incl. wheel shock absorber (100 km/h) • Aluminum floor • Aluminum walls • Tie-down option on the outside • Tie-down option on the inside • Divided stall bars with plastic protection • Center post partition, pivotable front and rear, removable • Height adjustment for stall bars • Depth adjustment for stall bars • Panic release in the front • Fixed head grate and removable privacy screen • High side entry door • Entry door can be locked • Door lock on entry door • 2x sliding windows on the side at the rear • Single-wheel fender, plastic (black) • Rubber glued and sealed to the floor • Hay net hook • Side padding (2 pieces) • Kick protection on side walls (GFK plastic) • Awning roller as a net • Towing handle • Lifting device with gas-filled shock absorber on tailgate • Step on tailgate • 3rd brake light on tailgate • Lighting system with reversing light • 13-pin connector • License plate holder: 34 x 20 cm Special equipment included in the price: • High saddle compartment inside with: height-adjustable saddle holder, mirror, bridle holder, luggage net, storage basket _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, overall weight: 465 kg, input voltage: 240 V, total width: 600 mm, total length: 3,800 mm, total height: 1,300 mm, Multifinisher Multigraf Touchline CPC375 XPro & Folding Unit TF375 XPro Counter reading: approx. 395,000 sheets Specifications: Paper size: 105 x 148 mm - 375 x 1,050 mm Finished size: 50 x 48 mm - 375 x 1,050 mm Paper weight: 100 - 400 gsm (creasing), 80 - 300 gsm (perforating), 80 - 400 gsm (cutting) Feeder: Stack feeder (suction belt) Max. speed: 2,100 sheets/hour (SRA3 to A4, 2-up) Feeder capacity: 180 mm Double sheet detection: Ultrasonic Tool recognition: Fully automatic Operation: Touchscreen Power supply: 240 V, 50 Hz Dimensions (L x W x H) with folding unit: 3,800 x 600 x 1,300 mm Weight with folding unit: 465 kg Fodpfxexvx Ats Aggsgg The machine has been workshop overhauled and maintained according to the manufacturer’s specifications. Warranty period: 6 months. The machine is available ex stock in Renningen near Stuttgart. Optional shipping within Germany negotiable. Installation and operator training on site (within Germany) negotiable. Optional maintenance contract available.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Fjdpfx Aozxcf Roggogg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: good (used), Year of construction: 2002, machine/vehicle number: 69584, Offer 26220 Technical Data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² tensile strength 16 mm - Cutting thickness at 400 N/mm² tensile strength up to 1000 mm length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet metal clamps 18 pcs - Stroke rate 10 - 23 min - Motorized back gauge up to 1000 mm - Rear guard with light curtain - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet metal thickness in mm - Automatic cutting angle adjustment based on sheet metal thickness - Cutting length limitation - Automatic positioning of the back gauge (8 programs – 80 steps) with - Digital display and automatic retraction of the back gauge Fgsdpfxszuzrbe Aggjg - Drive 400 V / 22 kW - E - Foot pedal - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine/MEWP transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-safety long-distance FH cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Gearbox/I-Shift operated via driver's seat control unit - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco Cruise Control (cruise control) including brake cruise control - Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo engine brake - etc. WIESE body for MEWP and construction machine transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length: approx. 9,050 mm usable - External width: 2,550 mm - Loading height top of floor: approx. 1,050 mm unladen - Robust, weight-optimized welded steel construction, box-section design - Short cross member spacing for high point loads - Tapered rear for low ramp angle - Outer frame profile 90° - Front wall in reinforced version - Internal toolbox at the bottom in front of front wall - Grating floor - Designed for 5,000 daN wheel load - Steel sheet boxes above axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points - 4 lashing eyes 8 to. recessed at rear (left/right/center/center) - 4 lashing eyes 8 to. recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp Fedpfxsw Itmrj Aggogg - Ramps as 2 individual/extendable units, both ramps laterally adjustable - Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock - Robust tension bar for transport securing (alternative: strap tensioning) - 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab - Ramp and support operation via electro-hydraulic system - Remote control and emergency control on the control block - Stainless steel control box mounted on frame side - Superwinch 8.2 t with approx. 20 m steel cable - Step access with grab handles left/right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge) - Side skirting as per sample pictures (green vehicle) optional, extra charge - KTL body coating - Trailer coupling with 3.3 t ball head at rear - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 external LED work lights on frame as area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. Fgjdpfjy An I Ijx Aggsg 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Fjdpfxeym T Iao Aggjgg Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-Axle Volvo Machine/Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver cab FH - Cab autonomous heater, 2 kW Fgodpew Itl Usfx Aggog - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Transmission / I-Shift control via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco cruise control (cruise control), including braking cruise control - Manual shifting possible in automatic mode (incl. Kickdown, adaptive traction control) - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (on both sides) - Driver alert system for fatigue warning - VEB Volvo Engine Brake - Etc. WIESE body for platform and construction machine transport with hydraulic loading ramps - With 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height to upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, volume design - Short cross member spacings for high point loads - Rear tapered for low approach angle - Outer frame profile 90° - Front wall, reinforced version - Storage box inside, below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with continuous Multi-X contour along the full length with numerous 2.5 t lashing points - 4 lashing eyes, 8 t, recessed at the rear (left/right/center/center) - 4 lashing eyes, 8 t, recessed in front of the front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable pieces, both laterally adjustable - Ramps can be used as approach ramps or as drive-through ramps for material handling equipment (extension section remains closed), fixed section placed onto the building ramp - Sturdy locking bar for transport security (alternative with belt tension) - 2 hydraulic rear supports with pads, buzzer and control light in cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency operation at the control block - Control block mounted in stainless steel tool box at side of frame - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handrails right and left for access to load area - 5 stainless steel toolboxes in drawer design, incl. lighting as option (surcharge) - Side panels as per sample pictures (green vehicle) optional (surcharge) - Body coating KTL - Ball hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high at the front wall - 4 LED work lights on frame sides as ambient lighting - 2 LED work lights at the rear - 1 removable rotating beacon at rear The stock vehicle comes with white cab and superstructure in Novagrau (outer frame paintwork according to RAL color of your choice upon request, price on application).

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 340 mm, total width: 280 mm, total length: 660 mm, ground cable length: 2,500 mm, overall weight: 31 kg, type of cooling: air, hose package length: 5,000 mm, electrical fuse: 32 A, protection type (IP code): IP23, welding current (min.): 100 A, welding current (max.): 1,000 A, Equipment: documentation/manual, type plate available, incl. welding torch A12 – gas length 5 m, with shielding gas stand PSS-2 and accessories for ARC 6 to 12 mm gas, protective hose for hose assembly Fgedpfeyrtp Uox Aggeg Application: - Particularly suitable for thicker sheet metal from approx. 2 mm - Stud welding of welding nuts type HexNut M6 to M8 (special accessory required) - For welding on perforated and non-perforated sheets Features: - Microcontroller control - Function monitoring - Error code display - Lift-off test - Library function - Process flow control Safety: - Integrated mains filter - Optimal for construction sites with high mains voltage fluctuations - EMC tested - High voltage testing - Restart lockout - Thermal monitoring of the transformer - Thermally controlled fan - Galvanic isolation between control and welding cables - Maximum protection against external interference - Protection class IP 23