Used Hammel Chopper for sale (141)

Condition: used, Used Lödige model FKM1200D stainless steel ploughshare mixer. Manufacturer: Lödige Model: FKM1200D/2MZ/2ZF Material: Stainless steel Capacity: 360-840 litre working capacity, 1200 litre total capacity (product dependent) Mixing Chamber: 1700 mm long x 950 mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Guodpfxsx R S Ubs Agpsb Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 25/36 kW, 730/1465 rpm, 380 V electrical motor with gearbox Also Includes: - 2 stainless steel side wntry choppers direct driven by 7.5 kW, 2930 rpm, 380 V motors. - Control panel - controls mixing time, start/stop mixing blades, start/stop choppers, open/close inlet valve, open/close outlet valve.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Gusdpfsx I Akujx Agpeb Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Gusdjwr Dhcopfx Agpsb Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: new, - 1 discharge power 5,5 (7,5) kW (PS) throughput approx. ……………. 800 kg/h electric outlet 400V 50Hz (3 phases) fuse 20 A dimensions: length 725 mm Gjdpfx Aob Nvr Iogpsub width 690 mm height 1 520 mm weight 70 kg material 1.4301 / AISI 304 discharge height 475 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: new, power 4,0 (5,45) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 880 mm width 735 mm Gedjb Nvn Tjpfx Agpoub height 1 540 mm weight 70 kg material varnished steel discharge height 450 mm suitable for branch diameter up to 50 mm

Condition: new, power 11 (15) kW (PS) throughput approx. ……………..… 1500 kg/h electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: Gedpfob Nvtkox Agpjub length 810 mm width 725 mm height 1 570 mm weight 125 kg material 1.4301 / AISI 304 discharge height 495 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, power: 4 kW (5.44 HP), fuel type: electric, machine/vehicle number: 10038627 / 316200002G, Voran Muser steel version New machine - Slight paint damage Subject to prior sale! Gjdpfx Ajtr Dx Sjgpjub

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Gusdpfx Ageim I Rujpob Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: good (used), Year of construction: 1986, working width: 500 mm, overall weight: 12,500 kg, machine/vehicle number: 017128, CASE IH 1660 axial flow Brand: Case IH Model: 1660 Year: 1987 Operating hours: 3,300 h Cross-section width: 5.00 m Various types of equipment: straw chopper, straw spreader Gjdpfx Ajvr Dxpegpsub

Condition: refurbished (used), functionality: fully functional, working width: 2,470 mm, ground clearance: 1,130 mm, color: white, overall weight: 16,000 kg, empty load weight: 3,020 kg, maximum load weight: 12,980 kg, loading space volume: 51 m³, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total height: 2,900 mm, total length: 7,820 mm, total width: 2,550 mm, MOBILE VAN BODY BOX WITH DOORS CORRUGATED SIDE WALLS REAR DOORS Guodpfx Ajx Rvqtjgpsb RAILWAY CODING NEWLY REPAINTED IN WHITE

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 23 03 28 / 1, functionality: fully functional, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing Godst Hvkvopfx Agpoub - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: excellent (used), Mixer - Grinder KOLBE -Type: MWE 32 -Diameter: 100mm -Chopper volume: 120l -Capacity for 3 mm: 1400 kg/h -Mixing speed: 24 rpm/min Gujdsup Eptjpfx Agpsb -Power main motor: 5,5 kW -Power mixing motor: 1,1 kW -Dimensions: 1250 x 800 x 1350 mm -Weight netto: 480 kg -Condition: Used

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Gedolwtzyjpfx Agpjub Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: Guedpovn D I Njfx Agpjb The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER Guodpoxmthrefx Agpob MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: used, Patty Production Line, Including: 1ea Bowl Chopper, Maker Seydelmann, Model K326 AC-8, Year 2020; 2 units of Brine Agitation Tank, Maker AMFEC, Model BT-400; 2 units, one unit is unused and storaged in the wooden case; 2ea Mixing Elevator, Maker AMFEC, Model 15-C & 2-3K; 1ea Mixer, Maker AMFEC, Model 510; Gedpfxsyhm E Uo Agpoub 1ea Small Mixer, Maker Local, Model JBZL750, Year 2023; Size 1900*1500*2000mm, Weight 1500kg; 1ea Screw Feeder, Maker AMFEC, Model 610; 1ea Vacuum Filling Machine, Maker VEMAG, Model HP25E, Year 2020; 1ea Food Molding Machine, Maker DJM, Model VF12, Year 2020; to include Mold; 1ea Spiral Freezer, Maker FPS, Model SS44-21550-1.8; to include 1 unit of CIP washing station; not include cable between control cabinet to mainframe; 1ea Laminator, Maker MULTIVAC, Model T850, Year 2020; 1ea Bagging Machine, Maker Niverplast, Model EP-1500-C-D-E-I, Year 2018; 1ea Metal Detector, Maker LOMA, Model IQ4, Year 2020; Patty Stacking Machine, Case Erector, Case Sealer, Stretch Wrapper, Inkjet Printer, Chiller, Water Chiller and more