Used Heavy-Duty Hydraulic Profile Bending Machine for sale (77,092)

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm Fjdpfogh T Iaex Adcegc - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to Fodpofkz Rbofx Adcsgc - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 Fgedpfx Aded S Uf Socjc bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory Fgedpfx Adogh T Hrjcec - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2024 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm Fgjdpfx Aegh T Hkjdcsc - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60 M standard basement Fgedpfx Adjgh T H Dscoc - year of construction 2023 - motorized - two working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable Fedpfx Adog Ntmhecjgc - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph. Fgjdpsd A Nb Hsfx Adcjc

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Fgjdeytn E Tepfx Adcsc Technical data on photo

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Fsdpfx Adew Slctscegc Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual Fjdpfow Slcgjx Adcjgc OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Fgjdpew Slbvefx Adcjc Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Fgjdpfx Adou Snm Iecoc Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Fgsdpfxexflfms Adcoc Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Fgedeu Snlkepfx Adcsc Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: new, Year of construction: 2026, For sale: a robust, professional brushing machine Kusing K2L-600e with electric lift and digital tool-height adjustment. It is the heaviest brushing machine in its category – it withstands any vibrations even when removing material more aggressively. The machine is designed for intensive daily use, ideal for wooden-floor manufacturers or other operations where brushing is required every day. Main advantages: • Absolute stability: a massive construction prevents vibrations even under heavy material removal. • Precise tool-height adjustment: digital lift with accuracy to tenths of a millimeter. • Long service life and reliability: built from durable materials, engineered for harsh operating conditions. • Easy operation: intuitive control of speed, RPM, and lift, with minimal maintenance. ––– Fedpex Utudefx Adcogc Technical specifications • Main motor power: 4 – 5.5 – 7.5 kW (adjustable as needed) • Feed motor power: 0.75 kW • Lift motor power: 2 × 0.37 kW • Feeding speed: 2 – 12 m/min (adjusted via a frequency inverter) • Shaft length: 600 mm • Shaft diameter: 40 mm • Conveyor belt width: 600 mm • Machine weight: 950 kg

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-quality and customized industrial solutions worldwide. This hydraulic decoiler is designed for heavy-duty coil handling applications, ensuring stable, safe and efficient unwinding of steel coils in industrial production lines. The system is available for capacities ranging from 6 tons up to 20 tons, depending on production requirements. Equipped with a hydraulic mandrel expansion system and high-pressure hold-down arm, the machine provides controlled and balanced coil feeding even under heavy loads. CONFIGURATION 6 Ton Hydraulic Decoiler Fsdpfeyy Sf Ejx Adcsgc 10 Ton Hydraulic Decoiler 15 Ton Hydraulic Decoiler 20 Ton Heavy Duty Hydraulic Decoiler Configuration varies depending on coil weight, width and line requirements. KEY FEATURES Hydraulic mandrel expansion system Hydraulic hold-down (snubber arm) for stable unwinding Forward–backward body movement for precise line alignment Coil loading car for safe and fast coil positioning Coil centering system Optional mandrel support for heavy coils OPERATIONAL ADVANTAGES Safe and stable coil handling Reduced operator intervention Improved production efficiency Short lead time compared to European manufacturers Long service life with robust structure APPLICATION AREAS Press feeding systems Coil processing lines Sheet metal production Automotive and steel service centers OPTIONAL EQUIPMENT Available optional features: Hydraulic coil loading car for safe and efficient coil handling Hydraulic hold-down (press arm) system for controlled unwinding Forward–backward movable decoiler body for precise line alignment Mandrel support system for heavy-duty applications REFERENCE PROJECTS Images included in this listing represent reference installations of similar hydraulic decoilers delivered and commissioned in recent years across different countries. These projects reflect our proven manufacturing capability and international experience. Additional references can be shared upon request.

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Fgodpjza Tn Tjfx Adcsc Shelf dimensions: 2,700 x 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,200 x 2,000 mm Weight: 250 kg External reference: 1

Condition: not inspected (used), functionality: unexamined, total length: 2,700 mm, total height: 2,400 mm, total width: 600 mm, overall weight: 200 kg, No reserve price – guaranteed sale to the highest bidder! By bidding, you commit to timely collection between 23.06.2026 and 26.06.2026! Fgsdpjza Tidofx Adcoc TECHNICAL DETAILS Dimensions of storage surface: 2,600 x 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 600 x 2,400 mm Weight: 200 kg External reference: 19

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, throat depth: 400 mm, operating speed: 50 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Fodpfxjwzqx He Adcjgc Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm Fsdow A H T Aspfx Adcogc A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: not inspected (used), functionality: unexamined, total length: 8,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Shelf dimensions: 1,800 x 1,100 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,000 x 1,200 x 2,000 mm Weight: 400 kg External reference: 9 Fjdpey D Sc Esfx Adcogc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Fgjdpfx Adowk Rlxocjc max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated Fodpfx Adsv D Uhfecsgc ≤2m workpieces are unloaded through servo flaps

Condition: like new (used), Year of construction: 2024, functionality: fully functional, overall weight: 70 kg, Sturdy, custom-built robot pedestal designed for Universal Robots UR10 (robot not included). Constructed from high-quality steel profiles, providing exceptional stability and durability. Dimensions: 1000 × 1000 × 480 mm Weight: ~70 kg Material: Steel Fgedpfx Ajy Iccdedcjc Condition: Very good, like new Mobility: Equipped with lockable caster wheels for easy repositioning Top Mount: Designed for UR10, but the top plate can be easily swapped for other setups Handles: Integrated handles for safe handling and transport Location: Budapest, Hungary Perfect for industrial, R&D, or production environments requiring a solid and mobile base for robotic applications. Shipping on EXW basis (but we can help with shipping if requested). Price exludes VAT.