Profile bending machine

Zopf ZB 60 M

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage Chodoyv N A Hjpfx Ab Dsb - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Codpfxoycu E Es Ab Djhb Height:2200mm Weight:2900kg

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF model ZB 60 M - motor-driven Chsdpfx Aezl Ud Ejb Djb - Two-roller drive - Shaft diameter 30 mm - with standard rollers - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 180 kg - Motor 0.75 kW, 400 V, 50 Hz, 3-phase

Condition: new, Year of construction: 2026, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Chjdpfx Abet D D Nze Deb Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Cedpfx Asx H Rmuob Dshb Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Horizontal bending machine Fastech FP 40 Description • Pressing force: 40t • Stroke: 285mm • Max. tool height: 250mm • Flat bar over the top edge: 200 x 24mm • Working speed: 10.0mm/sec Chsdpsfg Eu Rofx Ab Dsb • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power consumption: 4.0kW • Motor: 400 Volt 50Hz • Weight: 1100kg • Dimensions L-W-H: 1250 x 650 x 1250mm • Oil capacity: 40.0l Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 x tool set • Double foot switch

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch Chjdpowrm Dtefx Ab Dsb >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Chodpovz Ec Ijfx Ab Deb Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Weight: approx. 100 kg Codpfx Asb Ez R Usb Dshb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, incl. complete set of accessories such as video camera, spiral back-feed device Cjdpeypcd Aefx Ab Djhb