Used Hess Frame Press for sale (20,796)

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, Dcedpfxjvrv H Sj Aggjl external sizes L x H 3000 x 2000 mm, ca. 200 kg

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Djdpfsd Ih H Sex Aggjcl

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Dcodpfxotqwtdj Aggol Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Djdpjztaufsfx Aggscl

Condition: new, Working width 3500 mm Dcsdpfx Aed Rzc Reggjl Working height 2300 mm Number of cylinders 4 St.

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side Dcsdpfxsyuxko Aggel > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Dcjdpfx Ajzxcf Roggel Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Dcodpfx Agoyh I Tkegel Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Dodpfx Aezxdxxsggjcl Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Djdpfx Agjd Ih H Njgscl Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. Dcsdoy Hl Hpjpfx Aggsl New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: new, Technical Data • Application: for frame assembly • Minimum frame outer dimension (mm): 120 x 120 • Maximum frame outer dimension (mm): 700 x 2200 • Machine length (mm): 2750 • Machine width (mm): 1250 • Machine height (mm): 900 • Machine available in special sizes Machine Features • Precise alignment of frame strips eliminates any displacement of the mitered surfaces relative to each other. • Manual alignment of frame strips is no longer required. • Frames can be produced economically through automation. • Frame dimensions are not limited by the machine design. • Various popular methods for joining frame miters are possible. Dcsdpfx Asfiqllsggol • The compact design results in a small footprint for the machine. • Simultaneous gluing of the center layer is possible. • Complete fronts can be glued in a single process.

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), 1 Hydropneumatic press type STHP 60 kN with two-hand operation - floor model with and without base frame Djdopn Unvopfx Aggocl The compact and handy table model has a hydropneumatic drive with pressure intensifier which can increase the punching force up to 5 times. During the working stroke, the punching cylinder is pressurised with oil by the pressure intensifier and thus has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, Technical data Type of press Hand-operated knee lever press Type of operation Manual Overhang 200 mm Adjustable installation height 110 mm - 370 mm Stroke 15 mm Max. pressing force in the tensile test 55 kN At max. permissible lever pull force 330 N Mounting bore Ø25 H7 Tool clamping Removable clamping piece Type of guide with twist protection Prismatic guide Guide adjustable without play By means of adjustment strips Hand lever position Right, adjustable by 360° Height adjustment of guide part Ratchet Fastening of guide part per screw 170 Nm Standard color RAL 7035 Weight 184 kg Dedpfxozn N Hye Aggscl

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: HFE50-20LV010254, functionality: fully functional, pressing force: 50 t, stroke length: 350 mm, throat depth: 400 mm, working width: 2,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 8 Axis configuration: Y1 + Y2 + X1 + X2 + R1 + R2 + Z1 + Z2 Press force: 50 t Max. working width: 2,090 mm Frame distance: 1,665 mm Overhang: 400 mm Max. stroke: 350 mm Punch holder: Quick-change holder Tool holder type: European design MACHINE DETAILS Drive system: CNC Control system: Amada Operateur 2 CNC Power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 2,800 mm Weight: 5,500 kg Dcodpfjzzbalex Aggel Transport packages: 2 EQUIPMENT Tools Documentation CE marking

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Dcedpfx Aektm N Doggjl

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Djdpsy A Hkhjfx Aggocl Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm Dcjdpfx Ajyif Nroggel ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: good (used), Technical data for the pallet racking crossbeam: Dedpfeibngnsx Aggocl Racking system: Meta (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange INP profile: 100 x 50 mm Agraffe: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of crossbeams: 3,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t Dedpfx Aoiulkqjggscl - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: Dedpfx Agoxdttiogjcl • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Dcodpfewgi S Nsx Aggjl

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation. Dodpsxf Na Ujfx Aggocl

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm Dedpfx Agjxukpcjgjcl hole in the table 130 mm

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Dsdex Sw Iiepfx Aggscl Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A