Used Itf Satellite Shot Blasting for sale (1,250)

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Nsdpfx Ajwllmmoazjwl Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: like new (used), Year of construction: 2014, ROBOT BRAND: ABB Nwedpfxsz Erdye Aazol MODEL: IRB 1600-6/1.45 TECHNICAL DESCRIPTION PAYLOAD: 6 KG MAXIMUM REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROLLER: IRC 5 SOFTWARE: 6 WELDING EQUIPMENT FRONIUS TPS 4000 WITH WATER COOLING 3-AXIS ABB IRBP R 300

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RONDO MLC U – Industrial Rolling Line Industrial rolling line RONDO MLC U for the continuous production of laminated dough sheets. Particularly suitable for the production of puff pastry, croissants, Danish pastries, and other viennoiserie products. The U-shaped configuration allows for progressive rolling and sheeting of the dough before feeding it into a shaping line. Manufacturer: RONDO Model: MLC U Year: 2011 Industrial continuous rolling line U-shaped configuration Satellite rolling heads Folding/sheeting stations Transverse roller Nwodpfx Ajz D Ealeazel Touchscreen control Program memory Robust industrial construction Machine is fully functional Condition: Some conveyor belts are missing and will need to be replaced before the line can be fully used. The rest of the equipment is fully functional.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Nwsdpfxjz Drfuj Aazjl Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp Nwedpod Erqbofx Aazol coolant system vice

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz Nedpjz Dt T Tefx Aazjwl

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Njdeztkziepfx Aazjwl

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A-260606, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 77 mm, overall weight: 300 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 2 A, cutting height (max.): 100 mm, Object A260606 Refurbished Gingerbread/Cake Slicing Machine Fully refurbished gingerbread slicing machine with a cutting thickness of 77 mm. All electrical switching equipment and pneumatic components have been replaced in accordance with the latest state of current technology. By equipping the machine with two-hand operation, it has been made very safe to operate. Machine Information: Overall machine length: 1.6 meters Overall machine width: 1.25 meters Overall machine height: 1.3 meters Machine working height: 0.9 meters Distance between knives: 77 mm Machine Capacity: 240 wide slices of bread per hour Electrical Information Power supply: 400 V, N+PE Power consumption: 1.0 kW Plug type: CEE-form, 5-pin, 16 A (round red plug) Compressed air required?: Yes Minimum and Maximum Product Dimensions Product length: 100–500 mm Product width: 80–755 mm Product height: 40–100 mm Nwodpez Erybofx Aazel Machine Description This cookie slicing machine has been completely refurbished. The machine was fully disassembled, thoroughly cleaned by blasting, and coated with a durable two-component finish. It was then completely rebuilt. The machine is equipped with new bearings, a new drive motor, new pneumatic components, and a renewed and improved electrical system based on the latest technology. The machine is mounted on wheels. The speed of the product pusher is adjustable, allowing it to be adapted to the type of product being processed. This machine is in like-new condition! The machine is suitable for slicing breakfast cake (gingerbread-style cake) and/or currant bread. The machine is equipped with two swivel castors with brakes and two fixed castors. Warranty: 3 months (excluding knives)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-240601 en A-260302, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, overall weight: 900 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 6 A, year of last overhaul: 2026, cutting height (max.): 125 mm, conveyor belt width: 310 mm, Machine information: A-240601 Total machine length: 1.4 meters Total machine width: 0.7 meters Total machine height: 2.0 meters Infeed height: 1.2 - 1.8 meters Machine working height: 1.0 meter Cutting thickness: 12 millimeters Machine capacity: 1250 loaves per hour. Electrical information: Connected load: 400 volts, N+PE. Power consumption: 2.5 kilowatts. Plug type: CEE-form 5-pin 16 Amp (round red plug). Compressed air required?: No Minimum and maximum product dimensions: Product length: from 150 to 350 mm. Product width: 170 mm. Product height: from 40 to 125 mm. Machine description: This cake slicer has been fully overhauled. It was completely disassembled, grit-blasted, and sprayed with a durable 2-component coating. Following this, the machine was entirely rebuilt. It features new bearings, a new drive motor, and a renewed and improved electrical system according to the latest state-of-the-art technology. The machine is mounted on wheels. The product pusher allows you to push the final loaf through the blades. This machine is in excellent condition! The machine is suitable for slicing types of bread without fruits. This machine is mounted on 4 castors and is easy to move. It includes an oil reservoir to apply slicing oil to the band blades. Object A260302 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 metres Total machine width: 1.5 metres (including blowing table) Total machine height: 1.8 metres Working height: 0.9 metres Length of conveyor section: 1.8 metres Length of roller conveyor: 1.0 metre Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Electrical information Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Nsdpoz Eud Ajfx Aazjwl Machine description: The frame and both (2) leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Samach brush machine and a Kwik Lok clip-closing machine, suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-metre-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component high-durability topcoat. The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top face, and product guides.

Condition: ready for operation (used), Year of construction: 2004, clamping force: 6,500 kN, screw diameter: 80 mm, injection weight: 1,600 g, Hydraulic injection moulding machine manufactured in 2004. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details. • Hydraulic Core Pulls: 4 • Hydraulic Cascade: 8 • Hot Runner Control Zones: 16 Nedpfx Aez E Hikjazswl • Handling System: Wittmann W 843 Pro 0815 • Handling System Year of Manufacture: 2021 • Z-axis Travel: 3,000 mm • Y-axis Travel: 2,000 mm • X-axis Travel: 1,200 mm • C-axis: Servo, 180° • B-axis: Servo, 270° • Machine in very good overall condition • Annual maintenance has been carried out

Condition: used, Year of construction: 2011, 2011ARBURG 370 S 500-100 CNC Injection Moulding Machine Nwedjz E Ry Tepfx Aazol S/No: 218960. Clamping force: 50 t. Clearance between tie bars: 370x370 mm. Max. platen dimensions: 510x510 mm. Screw diameter: 30 mm. Shot weight: 65 g. Injection pressure: 1390 bar. Shot volume: 71 cc. Operating voltage: 400 V, 3~, 50 Hz. Control voltage: 230 V~, 50 Hz. DC control voltage: 24 V. Nominal motor current / heating: 58 / 13 A. Total rated current: 71 A. Total connected load: 42 kW

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Nedpfox Uqb Isx Aazjwl Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer Njdpfeyap Icox Aazewl - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Njdpfeyf Uy Uex Aazswl Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Njdpfx Aoyddufsazewl Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: used, Year of construction: 1990, color: yellow, loading space volume: 15 m³, loading space width: 1,700 mm, loading space length: 4,500 mm, loading space height: 2,300 mm, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Nsdpfxowt Dr Do Aazswl Body: roll-off container approx. 17 m³ open, year of manufacture unknown as there is no type plate ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Nwsdpjw Ivqmofx Aazjl

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency Nedpox Dkx Nefx Aazswl The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Nwodpfxjx D Rq Es Aazjl Application Types Injection Moulding

Condition: new, color: grey, overall weight: 10,000 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: approximately 10m³ open, asymmetric roll-off container - old DIN standard Material grade: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipping bearings: triple-sided, single-sided Njdpfx Aajvhi Afozowl tipping bearings - with warning markings - UVV sticker – container inspected and approved according to accident prevention regulations (UVV) - Continuous net or tarpaulin hooks - 4x mounting bolts - Mounting bolts and tipping bearings made from ST 52 - Corners reinforced inside and outside Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and painted outside with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY SPECIFICATIONS WITHOUT WARRANTY, subject to change, prior sale, and errors! -

Condition: used, Year of construction: 1990, color: green, loading space volume: 11 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 700 mm, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Superstructure: Roll-off container with hinged doors, approx. 11m³ Year of construction unknown, as no type plate available ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwodpfx Asvhn Uaeazel - .

Condition: used, color: blue, loading space width: 2,320 mm, loading space length: 4,950 mm, loading space height: 2,130 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, doors, lashing rails Nwsdei Rp U Tepfx Aazel Body: Box body designed as a roll-off container with wing doors, hook height approximately 1470mm! WITHOUT ROLLERS! The exact year of manufacture cannot be determined as no identification plate is present! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, Year of construction: 1996, color: green, loading space width: 2,420 mm, loading space length: 5,000 mm, loading space height: 800 mm, mileage: 1,001 km, first registration: 01/1996, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, steel superstructure, doors, tailgates, crane at the rear, emergency stop, grab control, elevated platform, 2-point mechanical support, 3 hydraulic outriggers. Superstructure: Roll-off container with folding sideboards, wing doors, and Atlas AK 100.1 V 12.8/3 A21 crane with elevated platform. Load diagram: 6.8 m - 1350 kg, 8.8 m - 950 kg, 10.8 m - 730 kg, 12.8 m - 600 kg. Mechanically extendable up to 16.1 m - 380 kg for an additional charge! Nedpfxei Rqx Ie Aazjwl Rotating head available for an additional charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, NEW PROFESSIONAL BLAST AND ABRASIVE BLASTING MACHINE, CONTRACOR ATTACHMENTS, TANK OF THE POLISH COMPANY KOMNINO, THE SANDBLACKER INCLUDES; - 200L PRESSURE TANK - SET OF HOSE, - ABRASIVE DOSING DISC VALVE, - NOZZLE TO CHOOSE - 6.5 MM, 8 MM, 9.5 MM, 11 MM, 12.5 MM, - A HELMET WITH A PROTECTIVE APRON, - TECHNICAL DOCUMENTATION UDT. Njdokht Dvjpfx Aazjwl WE WILL CHOOSE A SCREW COMPRESSOR AND A TANK FOR THE SANDBLASTER PRESSURE AND REFRIGERATION DRYER.

Condition: used, Year of construction: 1985, color: red, loading space width: 2,420 mm, loading space length: 3,150 mm, loading space height: 2,000 mm, mileage: 1,001 km, first registration: 01/1985, gearing type: other, driver cabin: other, Vehicle location: Bovenden. Nodsi Rmlfopfx Aazjwl Body: Box body with roll-up doors, walkable roof on a new city-type roll-off frame, total length approximately 4m, ex-fire department. The box was removed from a U1300L model, year of manufacture 1985! In top condition! All information is provided without guarantee, as the body is currently being prepared. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors.