Electrical Injection Moulding Machine

FANUC ROBOSHOT S-2000 i 150B

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics Iodpfjwg S Tvjx Aadoan OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Isdpfx Aajhigmbjdjan Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Isdpforthkuox Aadean Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Technical data Year of construction: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Iajdpfx Aju Uuakeaden Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm Ijdpfx Aaetpf N Usdoan - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: used, Year of construction: 2009, functionality: fully functional, A Scholz glass autoclave with dimensions of 9000 mm length x 3000 mm diameter is an industrial hot-air autoclave designed for the production of high-quality laminated safety glass and is typically a used unit from a specific year of manufacture. General Description and Features: This large-capacity industrial autoclave is primarily utilized in the architectural glass sector for the lamination process, in which layers of glass are bonded with interlayer polymer film materials (such as PVB or SentryGlas) under precisely controlled high temperature and pressure conditions. Key features and general specifications: - Dimensions: The inner chamber measures approximately 9000 mm in length (9 meters) and 3000 mm in diameter (3 meters). - Heating System: Equipped with an electric heating system that ensures consistent temperature distribution throughout the process. - Control System: Features a control panel, typically a touchscreen operator interface, along with digital temperature and pressure controllers (Honeywell), allowing accurate process monitoring and control. - Door Mechanism: Incorporates a rapid-opening closure system designed for industrial efficiency and workplace safety. - Construction: Fabricated from premium-grade materials, most likely carbon steel for the pressure vessel, with internal components engineered to withstand the demands of glass lamination operations. - Applications: Designed primarily for laminated glass, Scholz autoclaves can also be configured for other thermal processing tasks and composite material production—such as fiber-reinforced plastics—depending on customer requirements. Technical Data: Exact operating parameters (pressure and temperature ranges) for units of these dimensions may vary, as Maschinenbau Scholz manufactures each autoclave to suit individual client demands. - Operating Pressure: While typical Scholz industrial autoclaves are rated up to 210 bar, applications in glass lamination generally require pressures between 0.1 MPa and 1.6 MPa (approximately 1 to 16 bar). - Operating Temperature: The glass lamination process typically operates from ambient temperature up to about 150°C, although Scholz autoclaves are capable of handling temperatures up to 650°C for various processes. - Electrical Specifications (example for a used model): - Rated current: 1100A - Service voltage: 400V Iajdewintkopfx Aadsn - Control voltage: 24V, 230V / 50Hz These specifications and details refer to Scholz hot-air autoclaves for glass production, covering dimensions, heating systems, and control technology.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Iajdpfx Aeh Nypfsadon

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion Iajdpfx Aaedlcy Hjdon open tool, a current UVV test is carried out before delivery and braking time measurement.

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Iaodpfxsilhfce Aaden

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Iodpfx Aasw R Dg Uodean