Used Lds Dactron Laser Usb Shaker Control System for sale (62,338)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: PM 041 815-T, Pfeiffer Vacuum Model: TPS 600 Model No.: PM 041 815-T Ledpewnbxqofx Aiferp For further data see type plate illustration, device is untested.

Condition: not inspected (used), functionality: unexamined, Pfeiffer Vacuum Lrsdpfewnb D Hsx Aifsp DCU 001 For more data see the type plate image, device is untested.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11105234, TECHNICAL DETAILS Lsdpfxjyvzuhs Aiferp Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Position repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Ambient temperature for storage & transport: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air chiller Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Wrist protection rating: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled state at the previous operator.

Condition: good (used), The following Siemens Active Line modules are for sale. There are four available. Serial number: 1P 6SL3130-7ZE23-6AA3 Ljdpfx Ajrunmnoifjrp Manufactured in Germany. Further information can be found in the pictures. All four devices have the same design, there may be slight variations. You will find the sticker for all four devices, with the corresponding number and other data. If you have any further questions or are interested, please contact us. Shipping can be organized at any time on request.

Condition: used, This Siemens brand control panel is for sale. Serial number: 1P 6SL3000-0DE25-5AA1. Further information can be found in the pictures. The device is in good, used condition. Tested and ready for immediate use. For further questions please contact us. Shipping can be organized at any time on request. Ljdporum T Defx Aifsrp

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. Ljdpfoyxfrpex Aifjrp HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: repair required (used), Year of construction: 2000, Machine was used to unload an injection molding machine. The robot has 5 axes, the first axis being the rail. It was provisionally commissioned and moved in single-axis mode. Damage to the harmonic drive of the 5th axis was found. The sleeve broke there and would have to be replaced. All others run fine. Lodpfx Aiskt Nqbofjrp The control element is missing on the main switch. Machine can be inspected under voltage.

Condition: ready for operation (used), BAUMÜLLER BUH2-90/90-62-102-00 Power converter unit, inverter/rectifier good condition tested traces of storage storage find like pictures For further technical information please refer to the pictures Lredpfx Aotrlt Eoifep Scope of delivery as shown Auction price includes 19% VAT and invoice Shipping/collection by arrangement Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. No. B6491

Condition: used, Föhrenbach Laser Welding System Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Lredpjxbcwxsfx Aifjp Data sheets are available as PDF files. Complete data package (4 folders). As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Condition: new, Year of construction: 2025, functionality: fully functional, Emko ESM temperature control module, front panel mounting, relay output 24V. Ledpfx Aiew I Ebzofsrp

Condition: new, Year of construction: 2020, AU Optronics AUO TFT display 1 x P750QVN02.2 2 x 7 =14 pcs P550HVN02.2 LG 1 x LD750EQD (FL)(M1) Ljdpfjlwkuqex Aifjrp

Year of construction: 2000, condition: good (used), maximum load weight: 5,400 kg, bar diameter (max.): 40 mm, wall thickness: 50 mm, machine/vehicle number: 26130, CNC Controlled Axis: 'X' Axis Travel 0-18,000mm; 'Y' Axis (R.Hand Horizontal Drill Head) 10-450mm; 'Z' Axis (L.Hand Horizontal Drill Head) 10-450mm; 'V' Axis Travel (Vertical Drill Head) 20-895mm; 'R' Axis Travel (Saw Mitering) + 45 Degree to -60 Degree; Ljdpfx Asqcu Eueifjrp 'S' Axis (Sawing Stroke) 0-450mm; Maximum Position Speed: 'X' Axis 50 Metre/ Minute; 'Z' Axis 10 Metre/Minute; 'V' Axis 10 Metre/Minute; Hydraulic Power Packs to suit both machines; Electrical Control Enclosure for Power Electric Equipment, Central Gears for Drive Units & Electronic Equipment; Drill & Saw Line regularly serviced; Drawings of electrical circuits, controls and Manuals available; Service & repair reports all available on request. Weight of Drill Approx 6,000kg; Weight of Saw Approx 3,700kg; Bandsaw Blade size: 7400mm x 41mm wide; Weight of Electrical Cabinet Approx 700kg; Weight of Pincher with Carriage Guide Approx 800kg; The client may offer help to dismantle and remove the equipment. The footprint of the complete line is around 40 metres including the conveyor feed belt.

Year of construction: 2023, operating hours: 10,700 h, condition: like new (used), functionality: fully functional, Build Cylinder Size: 2x 400x400x520 mm Scanning Speed: 15,2 m/s Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller Ljdpfx Aijn Dxbyofsrp incl. N2 Generator incl. Breackout Station

Condition: excellent (used), Year of construction: 1996, FREQUENCY CONVERTER KVA 60 - VOLT 380/660 - 50/100 HZ - RPM 1450 - 6000 GOOD CONDITION Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz Lrsdpfx Aiowcqxcefep -Output: 380 V 100 Hz -Power: 60 KVA -

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Lodpfoy Nwtyex Aifsrp Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm Lodpfsthigrex Aifjrp - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W Lrodpfx Aethit Eeifep - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder Ljdpfx Ajrumymsifjrp lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Lrodpfx Aieh Ad E Hefop Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Lodpfx Aieh Aiy Ssferp Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: not inspected (used), Peter frequency converter FUS 037/CV from automation system. worked until recently, but has not been checked €120 per unit. Lrjdpfx Aiot Nhr Refop all 4 units €400

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler Lederwwzyopfx Aiforp • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Condition: good (used), LDS V830-335T Electrodynamic Vibration Test System with SPA10K CE and VENZO 800 Description For sale is a used electrodynamic vibration test system from Ling Dynamic Systems (LDS) consisting of: LDS V830-335T Shaker LDS SPA10K CE Power Amplifier DTC VENZO 800 Vibration Controller The system is suitable for professional vibration, shock, and environmental testing in research, development, quality assurance, as well as fatigue and material testing. Special feature of the controller: 8 activated measurement and control channels Activated in 2015 Integrated charge amplifier Sine Random (noise) Shock Resonance Search Dwell & Tracking Transient Capture Technical data, shaker Ljdsznlzyspfx Aifjrp Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V830-335T Design: Air-cooled electrodynamic shaker Sine force: 9,807 N peak Random force: 9,807 N RMS Maximum travel: 50.8 mm peak-to-peak Maximum velocity: 2.0 m/s Maximum acceleration sine: 735 m/s² (75 g) Maximum acceleration random: 588 m/s² (60 g) Frequency range: DC to 3,000 Hz First major resonance: 2,250 Hz Armature diameter: 335 mm Maximum test specimen weight: 160 kg Cooling air requirement: 0.245 m³/s Power amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Model: SPA10K CE Sine output power: 10,000 VA Maximum input power: 19.41 kVA Supply 50 Hz: 380 / 400 / 415 / 440 V Supply 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Mains voltage: 400 V ±6 % Equipment: LCD display Numeric keypad Master gain control Emergency stop Integrated air cooling Protection and monitoring systems Controller DTC VENZO 800 Vibration Controller Dactron Dual-DSP Shaker Control System 8 activated measurement and control channels Integrated charge amplifier Activated in 2015 Scope of delivery LDS V830-335T shaker with swivel frame LDS SPA10K CE power amplifier DTC VENZO 800 controller Dactron Dual-DSP controller Connection cables Software CD System manuals Calibration documents (available) Condition Used. Normal signs of wear and tear due to age and use. Scope of delivery as shown in the pictures. Pickup or shipping by freight forwarder by arrangement.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system Lrjdpfxjzntfmo Aifep - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt Lsdpfoznr Sxsx Aifjrp - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg