Used Lk Machinery Mt 800 Cambio Pallet for sale (83,524)

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Lodpfot Eatxex Amnsaa Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Lajdpjyu R Dzefx Amnsa Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Lodpfxjwg Sd Uj Amnsaa Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Laedpfx Aswg R Rtjmnja

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Lasdpfewg Sgcex Amnoa

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Ledpsylirlsfx Amnoaa

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop Laedpswiq Iwjfx Amnja 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: used, functionality: unexamined, measuring range X-axis: 1,970 mm, measuring range Y-axis: 1,470 mm, measuring range Z-axis: 1,220 mm, CNC gantry coordinate measuring machine LK, model G 80 Granite clamping table size: 3490 x 2080 x 500 mm Longitudinal travel: 1970 mm Cross travel: 1470 mm Vertical travel: 1220 mm Year of construction: 1987, commissioned: 1991 Incl. Renishaw measuring system Special export price: 4,500,- Lajdjgbdy Rjpfx Amnea

Condition: used, For Sale: LK Measuring Table, Granite Length: 3500 mm Width: 2100 mm Ledpfsgbd Rtjx Amnjaa Thickness: 500 mm Weight: approx. 10,000 kg Including: air bearings Price for the LK measuring table: €4,500 Delivery Conditions: Lead time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are purchased as seen and known by the buyer. We do not provide any warranty on used machines, accessories, or parts. All our quotations, orders, and agreements are subject to the "METAALUNIE TERMS AND CONDITIONS," filed with the Registry of the District Court of Rotterdam in the latest text as deposited there. These terms and conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry, as well as used paternoster systems from manufacturers such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems like Kardex Shuttle XP and XPlus. Machinehandel De Leeuw BV Oordeelsestraat 7b 5111 PA Baarle-Nassau The Netherlands

Year of construction: 1999, condition: excellent (used), Control system: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color display, keyboard CNC-Turbo Roughness for WINDOWS TECHNICAL DATA Granite test plate (DIN 876) Length x Width 1200 x 500 mm Accuracy grade Grade 2 Flatness: 16.6 µm Weight 250 kg Linear traversing unit Waveline 60 Basic Measuring stroke 60 mm Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel distance 400 mm Positioning repeatability < 10 µm Ledslxyp Hspfx Amnsaa Machine dimensions (W x D x H) 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller shutters  Granite plate 1200 x 500 mm  ISEL feed axis with ball screw  Workpiece support plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual for Waveline  Built-in kit for roughness measurement  Built-in kit for contour measurement  Various probes and holders for roughness and contour measurements  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the granite plate  Documentation

Year of construction: 1998, condition: excellent (used), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy class: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Probing range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeat accuracy: < 10 µm Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg Ljdpfxslxyqcs Amnoaa EQUIPMENT / ACCESSORIES  Completely enclosed housing with electrically operated shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable for Waveline  Installation kit for roughness measurement  Probes and holders for roughness measurement  Machine table  Emergency stop button on the machine table  Maintenance unit for compressed air preparation  Air damping elements for hard stone plate support  Documentation

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 240 mm, turning length: 1,016 mm, turning diameter: 406 mm, spindle bore: 51 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, quill stroke: 120 mm, Main spindle (headstock) Spindle bore: 51.5 mm Spindle mount: D1-6 Spindle taper: MT 6 Laodpeyi D Tfjfx Amnsa Speed steps: 12 steps Speed range: 30 – 2,000 rpm Feeds & threads Longitudinal feeds: 0.03 – 0.89 mm/rev Cross feeds: 0.015 – 0.44 mm/rev Metric threads: 0.4 – 14 mm (52 types) Inch threads: 2 – 56 TPI (40 types) Tailstock & carriage Tailstock taper: MT 4 Quill stroke: 120 mm Top slide travel: 120 mm Cross slide travel: 228 mm Drive & dimensions Main motor: 7.5 HP (approx. 5.5 kW), 3-phase Weight: approx. 1,945 kg Dimensions (LxWxH): approx. 226 x 96 x 165 cm

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Lajdpfx Amop R Iwhjnoa

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Lsdpfx Asiv R Hhjmnoaa

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Laodpfx Aef Hkgpemnsa Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: used, mileage: 149,811 km, power: 125 kW (169.95 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,381 mm, loading space width: 1,865 mm, loading space height: 1,898 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Renault MASTER 2.3 cDi refrigerated box body, 3.40 m, with portal doors * Body: TBV Willstätt, right-hand side door * sliding refrigeration curtain * THERMOKING V-300 MAX on-road and stationary cooling, 380 V electric * Payload approx. 930 kg * Vehicle no. for customer inquiries: 4561 * Air conditioning * Emission sticker (green) * Electronic Stability Program (ESP) * Manual transmission * Particulate filter * Electric windows * On-board computer * Anti-lock braking system (ABS) * Three-seater * Power steering * Bluetooth * Steel wheels * Full service history * 2/3-door No liability for typographical or printing errors Sale to business customers only Subject to prior sale and modifications. All descriptions are for identification purposes only and do not constitute any guarantee as defined by sales law. The description in the contract of sale is authoritative. * TOP SERVICE & QUALITY * We are pleased to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer * Warranty insurance available upon request from the insurer * TÜV / UVV LBW / tachograph testing and installation of OBU device can be organized by our local partners * 30-day export license plates available * All export documentation possible, but each must be requested individually * Toll registration for Toll-Collect can be arranged on site * Free transfer from Stuttgart Airport or Metzingen train station (Württemberg) Ledpfx Aeyczqhsmnsaa * ARRIVAL TRAIN STATION: 72555 METZINGEN / WÜRTT. * FOR ENGLISH: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * Visit us on our website at * Over 200 vehicles in stock at all times

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Laodpfx Amew E Ey Tenja Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: new, Year of construction: 2025, type of input current: three-phase, total height: 800 mm, total width: 2,093 mm, total length: 3,400 mm, overall weight: 3,200 kg, working height: 11 mm, warranty duration: 12 months, air pressure: 7 bar, feed rate Y-axis: 60 m/min, working width: 2,400 mm, The automatic machine for the production of packaging containers from corrugated cardboard, model KDT WG8C1-2400S, is used in manufacturing facilities of all sizes that offer specialized packaging services and use packaging in various sizes and designs. The system has been developed to automate the packaging process in your company, making it as simple and convenient as possible. With this machine, you can produce any type of carton for your products according to your specifications and your customers' requirements. Laodpfeynlrgjx Amnoa

Condition: new, Year of construction: 2025, functionality: fully functional, power: 30 kW (40.79 HP), input frequency: 380 Hz, type of input current: three-phase, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,150 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,415 mm, total length: 4,500 mm, total width: 3,350 mm, overall weight: 5,000 kg, CNC Nesting Machining Center KN 3710DE – 3-Axis – 2150 x 3100 mm. Immediately available from stock. For sale is a high-performance new CNC nesting machining center KN 3710DE. This machine is ideally suited for processing MDF, chipboard, HPL, plastics, and composite materials. Technical specifications: • Working area: 3100 x 2150 mm Ljdeynhlijpfx Amneaa • X-axis: 3100 mm • Y-axis: 2150 mm • Z-axis: 100 mm • Total power: 30 kW • 3 axes • Vacuum table for board machining • Automatic tool changer (depending on configuration) • CNC control system • Connection: 380–400 V The machine is ready for operation. Ideal for furniture production, interior fittings, and series manufacturing. Further information and photos available upon request.

Condition: used, mileage: 596,319 km, power: 170 kW (231.14 HP), first registration: 01/2019, fuel type: diesel, fuel: diesel, color: blue, emission class: euro6, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, tail-lift, traction control, truck registration, ,, * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. ... Subject to changes, prior sale and errors excepted Laedpfxjyrzy Ie Amnsa

Condition: used, mileage: 698,755 km, power: 331 kW (450.03 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 14,900 kg, maximum load weight: 19,100 kg, overall weight: 34,000 kg, axle configuration: 8x2, wheelbase: 2,600 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: other, emission class: euro6, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, * German vehicle * 1st hand * Complete documentation available * M-TEC pocket silo plate * Type TSS Lajdpfovhp Nfox Amnea * Suitable for all silos * Simple operation of the floor control * Particularly durable due to robust construction * 2x hydraulic outriggers * Extendable underride guard * Small turning circle thanks to 3 steering axles * Therefore also suitable for narrow streets and city centers * Trailer coupling * Trailer hydraulics * Duomatic valve * Gross train weight 40,000 kg. * Comfort cab with air conditioning * Auxiliary heating * Cruise control * Multifunction steering wheel * Refrigerator * Electric windows * heated electric mirrors * Electric roof hatch * Stereo CD * 2 air-sprung comfort seats * Heated seats * Raised exhaust * LED work lights * Storage box * Leaf/air suspension + raise/lower * Wheelbase 2.00 m + 2.60 m + 1.40 m * GVW. 34,000 kg * Unladen weight 14,900 kg * Payload 19,100 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Lasdpfx Amoxn Aagonea

Condition: ready for operation (used), Year of construction: 2023, Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Laedpfx Aow H Avbjmnoa

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Laodpfx Amswc A Rkenea

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Laedpfx Aou S I D Rjmnsa