Used Mikron Hpm 1350 U for sale (41,198)

Condition: ready for operation (used), Heidenhain UE 212 ID 313501-12 The costs stated refer only to the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis costs will be waived. As part of the repair, your component will be fully overhauled and covered by a 3-month warranty from us. Hfedpoy Nqygsfx Afrjh

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-02 Hjdpfxsy Nq Azs Afrofh The costs stated cover only the analysis for repair of your component, which you may send to us. After a thorough inspection, you will receive a detailed quotation specifying the actual repair costs. If you authorize the repair, the analysis fee will be waived. As part of the repair process, your component will undergo a complete overhaul and will come with a 3-month warranty from us.

Condition: ready for operation (used), Heidenhain UE 242 ID 313503-02 The costs cover only the repair analysis of your component, which you can send to us. After inspection of your component, you will receive an estimate with the actual repair costs. Once you approve the repair, the analysis fees will be waived. As part of the repair process, your component will be completely overhauled and will come with a 3-month warranty provided by us. Hfjdoy Nq Haopfx Afreh

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Hedpfx Afex Ervuorefh

Condition: good (used), The scope of delivery includes: 01x support post, used Material color: blue total length: approx. 1.660 mm profile dimension: U: 70 x 30 mm Hfedsk Uufxopfx Afroh material thickness: approx. 2,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Base plate dimension: approx. 130 x 130 x 3.00 mm Weight / pcs. : approx. 3,570 kg

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: light blue Hfodpfx Afok Uyriorjh total length: approx. 1.600 mm profile dim.: U 50 x 28 mm number of holes: 2 pcs. hole Ø: approx. 11 mm Weight / pc.: approx. 1,800 kg General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Included in the delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 400 mm Total width: approx. 220 mm Total depth: approx. 250 mm Number of mounting holes: 03 pcs. Hole diameter: approx. 15 mm Material thickness: 6 mm Weight per item: 10.87 kg Hodpfow Dy Ivox Afrsfh Note: L-shaped brackets are welded to the sides. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which may be quoted separately depending on the delivery location and quantity.

Condition: good (used), The scope of delivery includes: 01x U-profile, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Long hole: 40 x 15 mm Hfedpfxev Ia Rmj Afroh Material thickness: approx. 6.00 mm Weight | piece: approx. 26.31 kg Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x U-profile, used Material color: blue total length: approx. 1.480 mm U-profile: approx. 50 x 50 mm material thickness: approx. 3,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Weight / pcs.: approx. 4,930 kg General information about the article: Hjdpfxslhqkws Afrofh This article is offered for pickup only. Any additional transport or shipment of this or a dispatch of this article is connected with additional costs, which can be inquired separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow Hsdpfjh S H N Uex Afrjfh U-profile: 100 x 50 mm design: head traverse clear width: 2.707 mm 02x safety pins, used execution: completely galvanized To secure the longitudinal beams Against unintentional lifting out General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Hedpfsrywgzsx Afrofh Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 Hsdpfxjy Uwaws Afrefh - Documentation available: No - CE certificate present: No - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Table length [mm]: 1150 - Table width [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Hfedozcqf Ispfx Afreh Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Heated Mirrors - Leaf Spring Suspension - Differential Lock - Low Noise - Speed Limiter - Air Conditioning - Air-Suspended Seats - Rain Sensor - Rear View Camera - Sunroof - Sun Visor - Toolbox - Power Take-Off (PTO) = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Dump Truck 16m³ - 18m³ - 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm Euro6e Transmission – AT2612, 12-speed "I-Shift" automated manual transmission, suitable for gross vehicle weights up to 60 tons Emission Level – Euro VI Stage E Engine Brake – Volvo Engine Brake+ and exhaust pressure regulation, max. retardation D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design Gross Vehicle Weight – 44 tons Drive Axle Ratio – 3.33:1 Front Axle Suspension – 3-leaf parabolic springs Front Axle Load Capacity – 16 tons (2 × 8 ton front axles) Fuel Tank left front – 290 liters, between first and second axle AdBlue Tank – Chassis-mounted on the right, 57 liters, between 1st and 2nd axle Rear Underrun Protection – Aluminum, fixed, slim, EC approved Front Axle Tires – 315/80R22.5 - Drive Axle Tires – 315/80R22.5 Tire Pressure Monitoring System I-See Predictive Cruise Control (map-based topographic data, lower operating settings) Cruise Control – With I-Roll and I-Cruise, operated on the steering wheel Instrumentation – High-performance 12" fully digital instrument cluster DPF Regeneration Switch – for manual control and shutdown Hill Start Assist – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward Collision Warning with AEBS emergency braking system Cabin Climate – Electrically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera on the frame end Toll Preparation Kit for "Toll Collect" in Germany Additional Cabin Insulation – Extra thick insulation layer Cabin Color – Pure White – 1108 White Daytime Running Lights – V-shaped Dump Truck Equipment: Euromix MTP TMK 16m³ - 18m³ - 20m³ Dump Truck (HARDOX) Semi-circular shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear gate pivoting Spare wheel holder with winch Fenders aluminum Hfodpszdbzvsfx Afreh Versatile lighting options Access steps to the dump body (Access steps: Inside the dump body) EuromixMTP scissor-type tipping stabilizer Accessories: Hydraulically opening rear gate Tarp, manual or electric Chute for asphalt Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarp, manual or electric, with or without tarp protection cover Folding underrun protection systems Partial discharge for small areas EUROMIX REAR DUMP TRUCK – DURABLE AND ROBUST FOR YOUR APPLICATION! = Additional Information = Year of Manufacture: 2026 Front Axle 1: Steered Front Axle 2: Steered Number of Cylinders: 6 GVWR: 43,999 kg Body Manufacturer: EuormixMTP TMK 18m³ - 20m³ APK (Technical Inspection): New TÜV upon delivery

Condition: used, Year of construction: 2024, operating hours: 11 h, Equipment: all wheel drive, MAKE: MANITOU TYPE: 1350R YEAR: 2024 CE MARKED: YES OPERATING HOURS: 11 TIRES/UNDERCARRIAGE: 100% Hsdpfezbpurjx Afrofh POWER: 34KW ENGINE: WEIGHT: 2390KG OPTIONS: NEW MACHINE 2400KG MACHINE QUICK ATTACHMENT BUCKET FOUR-WHEEL DRIVE EXTRA FUNCTION

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, = Additional Options and Accessories = Hjdpfxozc Rcgo Afrefh - Heated mirrors - Leaf spring suspension - Differential lock - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sunroof - Sleeper cab - Sun visor = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Dump Truck 16m³ - 18m³ - 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm, Euro6e Transmission – AT2612, 12-speed "I-Shift" automated manual transmission, suitable for gross vehicle weights up to 60 tons Emission Level – Euro VI Stage E Engine Brake – Volvo Engine Brake+ and exhaust pressure regulator, max. retardation D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design Gross Vehicle Weight – 44 tons Drive Axle Ratio – 3.33:1 Front Axle Suspension – 3-leaf parabolic springs Front Axle Load Capacity – 16 tons (2 x 8 tons front axles) Fuel Tank – 290 liters, located on the left front side, between the first and second axles AdBlue Tank – Chassis-mounted on the right, 57 liters, between the 1st and 2nd axles Rear Underrun Protection – Aluminum, fixed, slim, EC-approved Front Axle Tires – 315/80R22.5 - Drive Axle Tires – 315/80R22.5 Tire Pressure Monitoring System I-See Predictive Cruise Control (map-based topographical data, lower operating settings) Cruise Control – With I-Roll and I-Cruise, controlled via the steering wheel Instrumentation – High-performance 12" fully digital instrument cluster DPF Regeneration Switch – For manual control and deactivation Hill Start Assist – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward Collision Warning with AEBS (Autonomous Emergency Braking System) Cabin Climate – Electrically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera at the end of the frame Toll collection preparation kit for "Toll Collect" in Germany Additional cabin insulation – Extra thick insulation layer Cabin Color – Pure White – 1108White Daytime Running Lights – V-shaped Dump Truck Equipment: Euromix MTP TMK 16m³ - 18m³ - 20m³ Dump Truck (HARDOX) Semi-round shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear gate hinged Spare wheel holder with winch Mudguards, aluminum Versatile lighting options Access steps to the dump bed (Access steps: inside the dump bed) EuromixMTP Scissor-type Dump Stabilizer Accessories: Hydraulically opening rear gate Tarp, manual or electric Asphalt chute Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarp, manual or electric, with or without tarp protection cover Folding underrun protection systems Partial discharge for small areas EUROMIX REAR DUMP – DURABLE AND ROBUST FOR YOUR OPERATIONS! = Further Information = Year of Manufacture: 2026 Front Axle 1: Steerable Front Axle 2: Steerable Number of Cylinders: 6 GVWR (Gross Vehicle Weight Rating): 43,999 kg Brand of Body: EuormixMTP TMK 18m³ - 20m³ APK (Technical Inspection): New TÜV (German technical inspection) upon delivery

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 -Power: 1200 VA Hfodpfx Afsy Tv S Ajroh -Dimensions: 215/210/H255 mm -Weight: 30.2 kg

Condition: good (used), HARTGESTEIN measuring and control plate DIN 876/1 with substructure Dimensions: Length: 800 mm Width: 600 mm Hfodpfxezati Rs Afreh Thickness: 120 mm Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 910 x 500 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Hfodpfoq Dlciex Afroh with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1997, Travel X/Y/Z: 1000mm/750mm/750mm, table-spindle distance range: 118mm-865mm, table dimensions X/Y: 1150mm/700mm, max. table load: 1000kg, speed: 12000rpm, tool positions: 30, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4500mm/3200mm/3100mm, weight: approx. 9500kg, spindle hours: 3427h. The tool changer is defective. Revisions in 2023: Z motor, axis lubrication, Z-axis guide carriage, Z module and interface. Documentation available. An on-site inspection is possible. Hedpfx Aezc Rfnofrjfh

Condition: used, mileage: 1,001 km, first registration: 01/1996, color: red, driver cabin: other, gearing type: other, Year of construction: 1996, Vehicle location: Bovenden, grapple control, foldable, 2-point hydraulic outriggers, four hydraulic extensions superstructure: loading crane 5 and 6 control circuit , crane approx.: 4.2m=3100kg, 6.0m=2250kg, 8.0m=1400kg, 11.8m=800kg , ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfjdpfxsi Rn Sgs Afrsh - .

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Z-axis travel: 750 mm Hsdsy Rxqvopfx Afrofh Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 090200220, Equipment: documentation/manual, For sale due to business closure - URGENT Very fine, rare, high-quality machine in working condition. Gear cutting machine for high-precision machining, providing great accuracy and reliability. It allows for the cutting of straight and helical gears. Straight-toothed gears with a diameter of 0 to 120 mm Straight-toothed gears with a diameter of 120 to 200 mm Hsdpfx Aoy Iqkpjfrefh See the technical sheet photo. Documentation accompanying the machine: Original operating manual: 150 pages Mikron representative training course (February 25 - March 1, 1963) Technical data sheet available upon request, as well as a list of available cutters: Mikron (12), L. Carpano (23), K. Schnyder-ks (27), Piltz (4) (PDF). H: 1.515 m L: 0.97 m W: 0.526 m Three-phase Machine weight: 680 kg To be picked up; removal is the responsibility of the buyer.

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 650 mm z-travel 500 mm Control Heidenhain iTNC 560 spindle tunring speed 12.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Hedpfxoy T Scwo Afrjfh Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories Hfjdpfx Afjzbrrtsroh MARCELS MASCHINEN CH