Used Mikron Hpm 1350 U for sale (41,223)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW Bdedpfxet Hw D Ro Apvod weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t Bjdpfxeu U Sabj Apvodd

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Bdjdpfx Apezcqf Ijvod Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Parts on table not come. Marked with red. Bjdpfowxdyxox Apvodd

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Bdedpfx Aswk Nm Ijpved

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Heated Mirrors - Leaf Spring Suspension - Differential Lock - Low Noise - Speed Limiter - Air Conditioning - Air-Suspended Seats - Rain Sensor - Rear View Camera - Sunroof - Sun Visor - Toolbox - Power Take-Off (PTO) = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Dump Truck 16m³ - 18m³ - 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm Euro6e Transmission – AT2612, 12-speed "I-Shift" automated manual transmission, suitable for gross vehicle weights up to 60 tons Emission Level – Euro VI Stage E Engine Brake – Volvo Engine Brake+ and exhaust pressure regulation, max. retardation D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design Gross Vehicle Weight – 44 tons Drive Axle Ratio – 3.33:1 Front Axle Suspension – 3-leaf parabolic springs Front Axle Load Capacity – 16 tons (2 × 8 ton front axles) Fuel Tank left front – 290 liters, between first and second axle AdBlue Tank – Chassis-mounted on the right, 57 liters, between 1st and 2nd axle Rear Underrun Protection – Aluminum, fixed, slim, EC approved Front Axle Tires – 315/80R22.5 - Drive Axle Tires – 315/80R22.5 Tire Pressure Monitoring System I-See Predictive Cruise Control (map-based topographic data, lower operating settings) Cruise Control – With I-Roll and I-Cruise, operated on the steering wheel Instrumentation – High-performance 12" fully digital instrument cluster DPF Regeneration Switch – for manual control and shutdown Hill Start Assist – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward Collision Warning with AEBS emergency braking system Cabin Climate – Electrically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera on the frame end Toll Preparation Kit for "Toll Collect" in Germany Additional Cabin Insulation – Extra thick insulation layer Cabin Color – Pure White – 1108 White Daytime Running Lights – V-shaped Dump Truck Equipment: Euromix MTP TMK 16m³ - 18m³ - 20m³ Dump Truck (HARDOX) Semi-circular shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear gate pivoting Spare wheel holder with winch Fenders aluminum Versatile lighting options Access steps to the dump body (Access steps: Inside the dump body) EuromixMTP scissor-type tipping stabilizer Accessories: Hydraulically opening rear gate Tarp, manual or electric Chute for asphalt Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarp, manual or electric, with or without tarp protection cover Folding underrun protection systems Partial discharge for small areas EUROMIX REAR DUMP TRUCK – DURABLE AND ROBUST FOR YOUR APPLICATION! = Additional Information = Bsdpfjzdbzvsx Apvodd Year of Manufacture: 2026 Front Axle 1: Steered Front Axle 2: Steered Number of Cylinders: 6 GVWR: 43,999 kg Body Manufacturer: EuormixMTP TMK 18m³ - 20m³ APK (Technical Inspection): New TÜV upon delivery

Condition: used, Year of construction: 2024, operating hours: 11 h, Equipment: all wheel drive, MAKE: MANITOU TYPE: 1350R YEAR: 2024 CE MARKED: YES OPERATING HOURS: 11 Bdjdpfx Aszbpuropvod TIRES/UNDERCARRIAGE: 100% POWER: 34KW ENGINE: WEIGHT: 2390KG OPTIONS: NEW MACHINE 2400KG MACHINE QUICK ATTACHMENT BUCKET FOUR-WHEEL DRIVE EXTRA FUNCTION

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer Bsdjy Tv S Aepfx Apvedd -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 -Power: 1200 VA -Dimensions: 215/210/H255 mm -Weight: 30.2 kg

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Leaf spring suspension - Differential lock - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sunroof - Sleeper cab - Sun visor = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Dump Truck 16m³ - 18m³ - 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm, Euro6e Transmission – AT2612, 12-speed "I-Shift" automated manual transmission, suitable for gross vehicle weights up to 60 tons Emission Level – Euro VI Stage E Engine Brake – Volvo Engine Brake+ and exhaust pressure regulator, max. retardation D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design Gross Vehicle Weight – 44 tons Drive Axle Ratio – 3.33:1 Front Axle Suspension – 3-leaf parabolic springs Front Axle Load Capacity – 16 tons (2 x 8 tons front axles) Fuel Tank – 290 liters, located on the left front side, between the first and second axles AdBlue Tank – Chassis-mounted on the right, 57 liters, between the 1st and 2nd axles Rear Underrun Protection – Aluminum, fixed, slim, EC-approved Front Axle Tires – 315/80R22.5 - Drive Axle Tires – 315/80R22.5 Tire Pressure Monitoring System I-See Predictive Cruise Control (map-based topographical data, lower operating settings) Cruise Control – With I-Roll and I-Cruise, controlled via the steering wheel Instrumentation – High-performance 12" fully digital instrument cluster DPF Regeneration Switch – For manual control and deactivation Hill Start Assist – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward Collision Warning with AEBS (Autonomous Emergency Braking System) Cabin Climate – Electrically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera at the end of the frame Toll collection preparation kit for "Toll Collect" in Germany Additional cabin insulation – Extra thick insulation layer Cabin Color – Pure White – 1108White Daytime Running Lights – V-shaped Dump Truck Equipment: Euromix MTP TMK 16m³ - 18m³ - 20m³ Dump Truck (HARDOX) Semi-round shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear gate hinged Spare wheel holder with winch Mudguards, aluminum Versatile lighting options Access steps to the dump bed (Access steps: inside the dump bed) EuromixMTP Scissor-type Dump Stabilizer Accessories: Hydraulically opening rear gate Tarp, manual or electric Asphalt chute Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarp, manual or electric, with or without tarp protection cover Folding underrun protection systems Bdjdjzc Rcgspfx Apvjd Partial discharge for small areas EUROMIX REAR DUMP – DURABLE AND ROBUST FOR YOUR OPERATIONS! = Further Information = Year of Manufacture: 2026 Front Axle 1: Steerable Front Axle 2: Steerable Number of Cylinders: 6 GVWR (Gross Vehicle Weight Rating): 43,999 kg Brand of Body: EuormixMTP TMK 18m³ - 20m³ APK (Technical Inspection): New TÜV (German technical inspection) upon delivery

Condition: good (used), HARTGESTEIN measuring and control plate DIN 876/1 with substructure Dimensions: Bdedpfx Apjzati Rjved Length: 800 mm Width: 600 mm Thickness: 120 mm Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Bdsdpfx Apsy Rxqvovjd Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 910 x 500 mm Spindle taper SK40 Spindle speeds -10000 rpm Bedpfxsq Dlcie Apvodd Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Bdodpfx Apeuhbxaeved EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, EQUIPMENT Bjdpfeuhbqpox Apvodd - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: Serien-Nr.: 107.84.00.188,, CNC machining center, manufacturer: Mikron, type: HSM 400, year of manufacture: 2005 Serial number: 107.84.00.188, travel ranges (x/y/z-axis): 400x450x350 mm, tool holder: HKS40E, max. spindle speed: 30,000 rpm, spindle drive: 13 kW, recorded operating/load hours: 44,899/32,369 (13,350 spindle hours since replacement) CNC control system: HEIDENHAIN iTNC530 Pallet table PPC 320x320 mm, 7-position pallet changer, 68-position tool changer, 1 Cooling unit BURN, 1 extraction system KELLER L-Cut, year of manufacture: 2012, Bdodpfx Aozdtacspvod Setup probe PS 32 (WITHOUT any further accessories)

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Bsdpezbrrtefx Apvedd Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Bodpfxjqttt Ts Apvedd

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 090200220, Equipment: documentation/manual, For sale due to business closure - URGENT Very fine, rare, high-quality machine in working condition. Gear cutting machine for high-precision machining, providing great accuracy and reliability. It allows for the cutting of straight and helical gears. Straight-toothed gears with a diameter of 0 to 120 mm Straight-toothed gears with a diameter of 120 to 200 mm See the technical sheet photo. Documentation accompanying the machine: Original operating manual: 150 pages Mikron representative training course (February 25 - March 1, 1963) Technical data sheet available upon request, as well as a list of available cutters: Mikron (12), L. Carpano (23), K. Schnyder-ks (27), Piltz (4) (PDF). H: 1.515 m L: 0.97 m W: 0.526 m Three-phase Machine weight: 680 kg Bdsdpfx Ajy Iqkpepved To be picked up; removal is the responsibility of the buyer.

Condition: used, mileage: 1,001 km, first registration: 01/1996, color: red, driver cabin: other, gearing type: other, Year of construction: 1996, Vehicle location: Bovenden, grapple control, foldable, 2-point hydraulic support, four hydraulic outriggers. Bdodpfx Aei Rn Sgspvod Superstructure: Loading crane with 5 and 6 control circuits, crane capacity approx.: 4.2m = 3100kg, 6.0m = 2250kg, 8.0m = 1400kg, 11.8m = 800kg. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, load capacity: 340 kg, mount diameter: 200 mm, rapid traverse Z-axis: 1 m/min, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, spindle speed (max.): 7,500 rpm, spindle speed (min.): 10 rpm, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Bedpfx Aep Sq Tropvodd Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Condition: used, functionality: fully functional, Mikron WF 21 C Brief description: CNC tool milling machine Description: Immediately available from site due to business closure: CNC tool milling machine Mikron Model WF 21 C Year of manufacture: 1980 Bdsdpfsx Scvfjx Apvjd Control: Heidenhain TNC 155 Table: 800 x 460 mm Travel X / Y / Z: 500 / 500 / 400 mm Tool holder: SK 40 Spindle speeds: 24 - 3150 rpm Weight: 2.2 t

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M Bedpfxew A Af Is Apvjdd with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Year of construction: 1991, functionality: fully functional, Mikron A35, complete with accessories, in perfect working order. Bdedpjzcvxysfx Apved

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm Bdedstqqpljpfx Apved distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table Bjdpfx Apjy H Ivmjvjdd -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm -Weight: 365 kg