Used Mineral Spiral Concentrator for sale (1,426)

Condition: new, maximum load weight: 37,820 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Chassis 10110.030 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337. K11110.893 With crossmember and container locking devices for accommodating: a) 1 x 20' container, flush at the rear. b) C715 Vehicle equipped with Quick-Lock locking devices! Suspension I 17160.013 Axle lift mechanism on axle 1. I 17165.113 Control of the axle lift, fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). 18330.701 Manufacturer of choice: Kögel - three-axle unit, with disc brakes Ø approx. 430 mm, installation depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires L20520.010 Wheels with internal sensors according to UN ECE R141. 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J). Chassis Components I 20110.012 JOST landing gears, mechanical with compensating foot, approx. 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5-inch tires consisting of: 3 pairs of semi-circular fenders with splash flaps. 21300.001 2 chock blocks with holder. 27510.130 Rigid rear underrun protection made of steel according to ECE-R58, in a bolted design. Braking / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638, (without connecting cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. I 32125.015 WABCO EBS system. 33420.070 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit. 34320.001 2 non-interchangeable coupling heads at the front ISO 1728. 34410.010 Air tank for brake system and air reserve made of steel (EN 286-2). Rear Impact Protection 42551.040 Solid steel rear impact protection on the rear end crossmember. Electrical / Electronics 60500.055 Lighting carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED outline lights and reflectors at the front. - Flashing LED side marker lights. - Superseal and bayonet connections for the lights. I 61910.120 2 LED multi-chamber tail lights with integrated LED outline lights with arm. K64100.932 Adapter spiral connecting cable (4m) from 15-pole socket to 2x7-pole Nodpfxsz N Nw Tj Abujlh plugs. Does not comply with ADR regulations! 64300.017 Front socket connection, 15-pole ISO 12098 (without connecting cables). I 65250.152 2 LED reversing lights (manufacturer of our choice) mounted on the rear end crossmember. The operator must ensure sufficient electrical protection of the towing vehicle (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3). K 68000.993 Complies with vehicle class EX/II, EX/III, FL, AT. Information Systems L69100.073 Tire pressure monitoring system according to UN ECE R141. Signage I 71100.030 1 hazardous goods sign, neutral

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data - Manufacturer: Bohrer Njdpoz Eh Sgjfx Abuolh - Model: R30 - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately.

Year of construction: 2014, operating hours: 40,000 h, condition: used, functionality: fully functional, belt width: 560 mm, number of shelf rows: 8, machine/vehicle number: B6, High-Capacity Industrial Ambient Spiral Cooling Conveyor Tower Nodoz E A Rkjpfx Abuelh Heavy-duty 8*2 -tier ambient spiral cooling tower engineered for food production and industrial bakery applications. Built entirely with a high-grade stainless steel frame and structure, ideal for washdown environments and strict hygiene standards. Key Technical Specifications: Tier Count: 16 continuous spiral tiers / turns. Belt Width: 560 mm food-grade blue open-mesh modular belt for maximum air circulation and product stability. Drive System: Heavy-duty Brevini / Rossi industrial planetary gear drive motor assembly. Control System: Freestanding stainless steel electrical control cabinet featuring a Siemens SIMATIC HMI touch display panel, integrated VFD variable speed frequency drives, and emergency safety stops. Applications: Suitable for ambient cooling of baked goods, confectionery, wafers, packaged products, and snack items prior to packaging. Condition: Used, Dismantled ،fully functional, clean, and in very good working condition.

Year of construction: 2022, condition: new, XSD310, 400 Volt Weight: 280 kg Jointer Jointer width: 310 mm Total length of jointer table: 1400 mm Diameter of cutterhead: 70 mm Spiral cutterhead RPM: 5500 Dimensions of jointer fence: 1300 x 150 mm Bevel adjustment of jointer fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power: 4 HP Thickness planer Dimensions of thickness planer table: 430 x 310 mm Throat of thickness planer: 230 mm Diameter of feed rollers: 30 mm Feed rate: 6 m/min Njdpfx Abodkl Sqsuolh Accessories: Spiral cutterhead Handwheel adjustment for thickness table with mechanical display Location: In stock at warehouse 54634 Bitburg The machine is on display at our showroom and is available immediately.

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm Nljdpfsw Sgnkox Abuoh - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric & manual hydraulic pump, loading ramp set (ramps + supports), parabolic suspension +100km/h Equipment: -Full steel floor -H-frame front -5-stage cylinder Net price: €9,050.42 / Gross price: €10,770.00 Article number: CHP235331811.05 Technical data: • Brand: Hapert Trailers • Model: Cobalt Plus • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 335 x 180 x 40 cm • External dimensions (LxWxH): 468 x 186 x 113 cm • Loading height of the floor: 73 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,106 kg • Payload: 2,394 kg • Chassis: High-loader (wheels under the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for attaching a cargo net, etc. • 40cm aluminum side panels with robustly integrated locks • Aluminum side panels, anodized, double-walled • Powder-coated side panels (anthracite/black) • All side panels foldable and removable • Steel corner posts, removable • Insertion possibility at all 4 corners for tarpaulin frames, grating attachments, side panel attachments or front wall extensions • Cargo net hooks on hinge lower parts • Stable eccentric locks • High grating 185x70cm for insertion • Full steel floor, 3mm hot-dip galvanized - extremely robust Nsdpfx Aoz Ri A Sobuslh • Reinforced, firmly screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts, continuously welded • All cross and longitudinal members rest on the ground • 6 lashing eyes recessed inside the side edge (1000DaN/kg), TÜV certified! • U-profile on the rear for easier attachment of the loading ramps • Loading ramp compartment with license plate flap • 2x integrated aluminum ramps, 250cm, load capacity: 3,600 kg • 2x crank supports, rotatable & crankable, heavy-duty • 1x crank for rear supports incl. holder • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status display • Manual hydraulic pump • External battery charging socket for 230V charger • Hapert 230V battery charger for Cobalt tipper • Parabolic axle from KNOTT • Shock absorbers for 100km/h, installed • Parabolic axle for absolute driving comfort! • Reinforced tires 185/70R13C • Reversing automatic • KNOTT inertia coupling and parking brake • 13-pole plug • Reversing lights • Large-sized safety lighting • Full-LED taillights incl. tail light protection grille • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced 70mm automatic support wheel with console

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle Nodpsz Rzh Hsfx Abuolh - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Nodpjz Ru Erofx Abuelh Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Nljdefz I Npjpfx Abujh Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: used, mileage: 4,800 km, power: 80 kW (108.77 HP), first registration: 11/2017, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M29 C.H.K 4x4 with winter package Vehicle can be re-registered to a maximum weight of 3.5 tons. 3.0 L, 80 kW / 109 hp turbo diesel engine, Euro 6, green 4,800 km, 645 operating hours * All-wheel drive with low-range gear * Automatic transmission * Air conditioning * Three-way tilting body with lashing eyes * Rear axle lock * Light bar with repeater lights and work lights * Foldable rotating beacon on the left and right * Hydraulic system * Swivel function, 2 front * Leakage line, front * Rear hydraulics Nsdpfj Aaudfex Abuelh * Control panel holder * Spiral fan * Gas inch function * Plug connection for front and mounted equipment * Snowplow function * Distance-dependent spreading * Radio with Bluetooth and hands-free system * LED work lights at the rear * Tires 285/65 R16C M&S * Inspection and service recently performed * Machine is in perfect, immediately operational condition. * TÜV/emission test newly passed * Includes winter package: Epoke spreader with stainless steel base, control panel and 4 parking devices * Fiedler snowplow * Leasing / hire purchase / trade-in possible. Various attachments in stock. Errors and prior sale excepted.

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. Nsdpfx Abjvc Apbsujlh *

Year of construction: 1990, condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,1 t dimensions L x W x H: 0,75 x 0,80 x 1,8 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 4mm Additional sieve inserts 5mm and 3mm are optionally available for 150.00 Euro per sieve. Nlodpfeu Tr Trjx Abueh *

Condition: used, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x8, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2025, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, traction control, trailer coupling, - Heated mirrors Nedjz R Tnaspfx Abuelh - Leaf spring suspension - Differential lock - Low noise - Air conditioning - Air-suspended seats - PTO EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. MAN TGS 37.480 BB 8x8 EURO 6e EuromixMTP EM 10 L Concrete Mixer Truck (also available as 8x6) Vehicle Equipment MAN D2676 LF86, (480 hp) power, torque, Euro 6e MAN TipMatic 12.28 OD - MAN TipMatic Offroad, -TipMatic Efficiency, 300 l fuel tank - 35 l AdBlue tank High-performance engine brake MAN EVBec, multi-stage MAN EasyStart hill start assist Navigation system Tires 385 /80R22,5 - 315/80R22,5 Axle ratio, i=3.25 Rear axle, 13,000 kg, AP axle - Front axle, 9,200 kg Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Bumper, steel, 3-piece Concrete Mixer Truck Equipment EuromixMTP - Concrete Mixer Body EM 10 L - Lightweight Model: EM 10 L Nominal volume 10m³ ready-mix concrete Mixing drum in lightweight construction Mixing drum in lightweight design made of HARDOX S450 material Mixing spirals in lightweight design made of HARDOX S500 material Gearbox manufacturer ZF-P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooler system integrated Mixing control mechanical and start-stop electrical Compressed air water system Water connection on the standing platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with standing platform Rubber insert on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swivel chute Drum lock to secure the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of steel over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 650l 500l 350l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling, Operation & Electrical Mixer operation - mechanical at the rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian) • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica |...

Condition: good (used), Year of construction: 2011, functionality: fully functional, Max. diameter = 450 mm and module = 10 Nodoz Rm Hzepfx Abujlh Min. diameter = 69 mm and module = 0.9

Year of construction: 2003, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process many different products for all kind of industries, like minerals, chemicals, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Nljdpfx Aeic Nq Hebuoh Non pressure shock resistant (NPSR) Scope: Hosokawa Alpine bare Turboplex ATP 200 air classifier with one single classifier wheel and 5,5kW motor

Year of construction: 2006, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Hosokawa Alpine compactor CS 25. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. Material of construction - product contacting parts: stainless steel - non product contacting parts: mild steel Non ATEX - Non Pressure Shock Resistant (NPSR) Scope: Nlodpfxsh U Awno Abush Compactor, with 11kW motor for compactor rolls and 4kW for the feeding screw, switch cabinet

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Nodpfsz Rwpyex Abuelh Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: electric, overall weight: 2,390 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, RRP: €41,000. Technical data & drive: Power: 100 kW / 136 hp * Torque: 260 Nm * Top speed: 135 km/h * Battery capacity: 50 kWh net / 54 kWh gross * Range: Up to 275–345 km according to WLTP Charging times: DC (Direct Current): Up to 100 kW at a fast-charging station (0 to 80% in approx. 30 minutes). * AC (Alternating Current): Three-phase charging at a wallbox with up to 11 kW. Special equipment: Rear wing doors with glazing Metallic/mineral effect paint Opel Connect Rear parking pilot system Nlodezt Ulxepfx Abueh Additional equipment: Driver's airbag, audio controls on the steering wheel, audio system BT (Bluetooth/USB interface), electric vehicle, electric motor 100 kW (cont. 57 kW), body/superstructure: van, charging cable with Schuko plug (Mode 2), closed cargo area partition, on-board charger (11 kW), wheel hub covers, wheelbase 2785 mm, halogen headlights, sliding door on the right.

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: SEW-EURODRIVE Type: R40DT71C2BMG/Z Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany Nedpfx Abjz Snkxjuelh

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 2,650 kg, maximum load weight: 850 kg, overall weight: 3,500 kg, tire size: 225/65R16C, axle configuration: 4x2, wheelbase: 4,100 mm, CO₂ emissions: 199 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 7.6 l/100km, fuel consumption (combined): 8.3 l/100km, color: grey, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 3, total length: 7,240 mm, loading space volume: 21 m³, loading space length: 4,240 mm, loading space width: 2,150 mm, loading space height: 2,300 mm, Year of construction: 2026, front tire size: 225/65R16C, rear tire size: 225/65R16C, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, soot filter, spoiler, traction control, Iveco Daily 35S18HA8 3.0 129KW/180HP Hi-Matic automatic transmission, new vehicle in stock – available immediately! Color: Mineral Gray IC371 Wheelbase 4,100mm Box body with sandwich construction and roof window, LED interior lighting (strips on the right side), roof and side spoiler in vehicle color. Cargo area length: 4,240mm, width: 2,150mm, height: 2,300mm, 8 pallets. 72625 Full-LED headlights. 06650 Automatic climate control. 01605 10-inch navigation system with DAB radio, color display, passenger car and truck navigation, driving style analysis, voice recognition, Apple CarPlay and Android Auto. 00344 Rear view camera. 01611 USB sockets on the driver and passenger side. 02533 Digital instrument cluster / digital cockpit. 00259 Driver comfort seat - suspension seat. 79297 Comfort headrests. 14522 Adaptive cruise control ACC. 05925 Programmable speed limiter. 02308 Aluminum rims Daily. 79336 Radiator grille with satin chrome lines. 73024 Mirrors for body width 2.3 meters. 02443 Multifunction leather steering wheel. 01553 Iveco logo in matte finish. 06555 Fog lights. 75082 Double passenger seat with storage compartment. 07196 Air conditioning compressor 170 cm³. 06064 Double parabolic springs at the rear. 00726 Spare wheel holder between frame longitudinal members. 02210 Spare wheel in driving condition. 00663 Splash guards. 02714 Heated and adjustable exterior mirrors. 04495 Airbag for driver. 04176 Airbag for passenger. 00587 Rear wall insulation. 00219 Two wheel chocks. 08647 Heated crankcase ventilation. 00256 Driver's seat occupancy sensor. 02211 Warning triangle. 5-step entrance step. We would be happy to provide you with a financing or leasing offer. Optionally, we offer you: Set of winter complete wheels on steel rim 225/65 R16 112/110R Nexen Winguard WT1 net 870EUR. Set of winter complete wheels on steel rim 225/65 R16 112/110R BRIDGESTONE W810 net 970EUR. Set of winter complete wheels on steel rim 225/65 R16 112/110R PIRELLI CARRIER Winter net 1020EUR. For a viewing, we ask that you make an appointment by phone. If you have any questions, please contact Mr. Bernhard Höger. Nledpfs Afanmsx Abush

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Njdpsvrvcasfx Abuslh Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Njdpezgclmjfx Abuelh Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Steel arch hall with a self-supporting arch structure, double-skin roof and wall cladding, and large wooden gates. Construction: Steel arch hall with curved steel beams. Dimensions (L x W x H): approx. 24.5 x 12 x 5.18 m Floor area: approx. 294 m² External passage height: approx. 5.5 m (according to the owner) Steel beams: Double-T beams, 200 x 100 mm Nledpfx Abe Afmavsush Exterior walls: Double-skin construction with corrugated sheet cladding Roof: Arched roof, double-skin Insulation: Approx. 80–100 mm mineral wool in the roof and exterior walls Roof covering: Corrugated profile with translucent roof panels End walls: Wooden cladding Gates: Large, double-leaf wooden gates on the end walls.

Condition: used, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in new condition, and is still in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analytical techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K), and lithium (Li), and alkaline earth metals such as calcium (Ca). The measurement is carried out simultaneously for these elements in a single step. Through consistent modernization of the flame photometers and a special focus on safety concepts, completely new application areas are opening up for many cost-sensitive customer groups – from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of the main strengths of AES; in addition, the technology of the FP8000 series scores points with its high determination accuracy. Measuring food samples Nlsdpfx Aboziap Ijush Determining the quality of high-purity glasses and vials for pharmaceutical packaging Concrete classification, analysis of infusion solutions. Flame photometer, laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with corresponding quality of standards Precision:

Condition: used, This WERNER & PFLEIDERER Multimatic bread dough divider and forming machine will be auctioned off online as part of our industrial auction / machinery auction for the bakery Schrannenbäck, which is closing down – including the bakery, sales area, DEBAG ovens, refrigeration equipment, and catering supplies. Nlodpj Abbb Hsfx Abujh You can find this and many other items on our platform.