Used Nozzle for sale (2,599)

Condition: used, mileage: 46,826 km, power: 294 kW (399.73 HP), first registration: 04/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering configuration RIGHT, with Rotorcleaner. Operating hours as of 31.12.24: 752. Total hours: 864h. Features: ASR, BrakeMatic, single-tone horn, ESS, EBA2, Bluetooth hands-free, RIO Box, MAN Tronic, MAN Media Truck 7 color display with navigation, LGS IV, Twin Engine 1-0905, 9m³ hopper, 2,660-liter water tank including filling system, 350mm debris chute, supply broom, sweeping unit with integrated conveyor roller, LED work lights, coarse dirt intake, flap valve via inlet pipe, rear suction option with 340 liters, additional 1,500-liter water tank, Rotorclean, total water volume 3,820 liters, adjustable speed for supply brush, dual sweeping unit, 600mm suction nozzle, laterally shiftable sweeping unit (400mm), high-pressure system: 280 bar at 74 liters water per minute, high-pressure unit behind suction nozzle and supply broom, front disc brush, manual suction hose. Kodpfx Abjyxznajvenc

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill-start assist * Emission standard EU6e (EC) * Preparation for tow hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN compartments, and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror left and right, convex, with LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist (Front Assist) * Battery 520 A (92 Ah) * Rubber floor covering in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip control (ASR), and ABS * Operating voltage 12 V * Stone chip protection * H2 - Normal roof * Differential lock on the rear axle (manually engageable, mechanical) * Immobilizer, electronic * Parking assist system (PDC) front and rear * Entry handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assist driving lights and coming/leaving home function * Electrical connection block and KFG (vehicle-specific wiring harness) * Premium interior noise damping measures * With UNECE CS&SU (Cyber Security and Software Update) * 4-cylinder diesel engine, 2.0L, engine code 03N.G * Automatic distance control (ACC) * 8-speed automatic transmission 4x4 * Glove compartment with lockable flap, illuminated * Entry handle on the partition in the cargo area * Automatic climate control "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Interior rearview mirror, automatically dimming * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist "Light Assist" * Leather multi-function steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Driver alertness and fatigue detection with driver monitoring camera * MAN SmartLink * 130 kW (LD - low power) * Fog lights including cornering lights * MAN Connect services including call services * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * 12 V socket, cup holder * Region code "ECE" for radio * Tire pressure monitoring system (TPMS) * L3 - Standard * Three-point automatic safety belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seat belt warning, front * Seat covers in fabric "Toronto Grid" * Seat heating for driver and front passenger, separately adjustable * Sidemarker lights * 2 remote control keys * Approved as a 3.5-ton vehicle * Start-stop system with brake energy recovery * Lane change assist (Side Assist) * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated * Windshield washer nozzles * Windshield wiper intermittent control with light and rain sensor * LNFZ (light commercial vehicle) version with up to 3 seats Knodpfx Aj Aauvnsbvsc * Keyless Go * Sliding door, right * Turn warning on both sides and drive-off alert * Turn assist braking function * Emergency assist including travel assist and lane assist * Preparation for alcohol interlock * Speed limiter with predictive control * Multi-function front camera * Partition * Step illumination * Digital radio reception (DAB+) * F

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke Knodpfx Aozkgzyobvec – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Knjdpoz R Uxmefx Abvsc

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V Kedpfxsz Smz Ae Abvonc • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction Knodpez Slkvjfx Abvec • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Kodpfoz Slx Tex Abvjnc Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), CATALOGUE NUMBER 8129 Technical data: - diameter of circular saw blades 500mm - spindle diameter 60mm - max. diameter of material being cut 380mm - min. thickness of material being cut 100mm - max. thickness of center prism 160mm - min. thickness of center prism 60mm - max. number of saw blades: 2 pieces per motor - motor power 4 x 7.5kW/400V, 50Hz Knodpfx Asz U Ihzebvsc - speed 1450 rpm - feed motor 1.5kW - manual table lifting up to 80mm - feed speed on frequency inverter 0-8m/min - output approximately 40 m³/h - dust extraction nozzle 2 x 150mm - dimensions (L/W/H) 6150x1350x2000mm - weight approximately 2000kg ADVANTAGES - Made in Poland, drewMET brand - 4000mm track - Unpainted – used machine, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc Kodeyfgzdspfx Abvonc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Kedpfxjzyu R Ue Abvenc Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. CONDITION Used machine in very good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, FUJI NXT placement machine / pick & place FUJI NXT M6 II (based on the M4 module) Configuration: Single-track design Current software versions (V 9.8.1) Heads: 1 H01 and 1 H12S Left-to-right running direction Very good condition. The modules are in top condition, having undergone technical refurbishment, and will be delivered ready for immediate use. In addition, we could also supply 2 additional placement heads: 1 H08 and 1 H04. Including nozzle stations. Very good condition. Inspection possible by appointment. Kodpfx Aboz Hxbnsvonc

Condition: used, Year of construction: 2004, Design of the intake nozzle: left Diameter of the intake nozzle: 160 mm Nominal volumetric flow rate: 2050 m³/h Filter area: 9.2 m² Cleaning: vibrating motor Chip disposal: 1 collection container Collection volume: 200 liters Filter material: polyester needle felt Kodoz R Du Aspfx Abvjnc Negative pressure at nominal flow rate: 2580 Pa Installation: mobile Weight approx.: 310 kg Motor power: 3 kW Power connection approx.: 400 Volt/50 Hz Storage location:

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 230188 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 27,9 (mit Absaugung) kW 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² Knodpfox Urp Hex Abvsc 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 188488 € 3562.42 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 26,4 (mit Absaugung) kW 3100 x 1525 mm 3100 mm Ksdpfx Ajx U Elbebvsnc 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Knjdjyzlzpepfx Abvsc A50 Front axle with increased load capacity, AR2 axle ratio i = 3.923, B25 electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable for tilt and height, CL3 leather steering wheel, CT1 vibration damper, D03 high roof, D93 partition omitted, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E1U USB socket 5V, E43 13-pin trailer socket, E46 socket in cab, E4S smartphone integration package, E7M MBUX multimedia system, ED4 AGM battery 12V 92Ah, EE1 230V socket, EE5 Ultracap Automatic transmission locking, ES0 jump-start connection, ES2 12V socket in luggage compartment/load compartment, ET4 Active Distance Assist DISTRONIC, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY2 DIGITAL EXTRA: LIVE TRAFFIC INFORMATION, F2W Winter package, F61 interior mirror, F64 exterior mirrors electrically folding, F68 exterior mirrors heated and electrically adjustable, FF4 storage compartment above headliner, FF5 storage above windscreen, FJ1 flip lid for storage compartment, FJ4 storage compartment under dashboard, FM3 WET WIPER SYSTEM, FR8 reversing camera, G43 9G-TRONIC, H00 warm air duct to passenger compartment, H01 thermal insulation load/passenger compartment, H12 auxiliary hot water heater, H15 passenger seat heating, H16 driver's seat heating, H1B tachograph operation front under headliner, H1I long-range nozzles in instrument panel, H21 heat-insulating glass with band filter on windscreen, H22 heated rear window, HH2 electric auxiliary air heater, HH4 THERMOTRONIC automatic climate control, IL5 left-hand drive, IR4 wheelbase 3,665 mm, IT4 3.5-ton variant, J10 speedometer km/h, J4V pre-installation intelligent tachograph EU, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver's seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JF1 rain sensor, JH3 communications module (LTE) for digital services, JI7 initial maintenance interval 60,000 km, JK5 instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 main fuel tank 93 liters, L65 roof light(s) load/passenger compartment with door contact, L94 deletion of parking light, LA1 High Beam Assist, LA2 driving light assist, LB1 side marker lights, LB5 3rd brake light, LC2 LED light strip in load compartment, LE1 adaptive brake light, LG7 LED High Performance headlamps, LX5 Europe, M60 alternator 14V / 250A, M72 vehicle HVO capable, MJ8 ECO start-stop function, MP6 engine version Euro VI, MR0 emission standard E (for heavy commercial vehicles), MU6 OM 654 DE 20 LA 140 kW (190 hp) at 3,800 rpm, P4F country set rating Euro-NCAP, Q11 longitudinal member reinforcement, QA7 tow bar for increased towing capacity 3.5 t, QA9 cross member with integrated step, R65 spare wheel carrier under frame end, R87 spare wheel, RF1 tire brand Continental (10), RH2 tires 235/65 R16 C, RM7 summer tires, RS3 steel wheels 6.5 J x 16, RY2 tire pressure monitoring on front and rear axle, wireless, RZ2 wheel brand Magnetto Wheels, S31 comfort headrests for passenger compartment seats, SA5 driver's airbag, SA6 passenger airbag, SB1 comfort driver's seat, SB2 comfort passenger seat, SE4 passenger seat lumbar support, SE5 driver's seat lumbar support, SK0 comfort headrest

Condition: ready for operation (used), functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,381 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1985-2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil, and filters free of charge at the time of sale. 4297 sweeping operating hours 7381 total operating hours 53179 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or alternatively with Kif front sweeper, type CM 1600, 1.300 mm wide, built in 2019 (like new/never seen snow), not shown in the pictures including Gmeiner salt spreader, type Husky 500V FS with support legs (like new/used twice for testing) like-new mixed bristle brush new water spray nozzles external controls for the sweeping material container rearview camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg Kjdpjzk Ukijfx Abvsnc permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. We are also available on Saturdays by appointment. Telephone appointments can be arranged outside of these opening hours. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial enterprises and exporters are given priority; this applies to our entire vehicle stock. The above information is not binding. Errors/changes and prior sale are subject to change!

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater Knedpfx Asu D Arijbvoc A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Knsdpfs Aa Nq Tex Abvsc Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!

Condition: used, Acword BR100 Extractor with Workstation Metal extractor from the Acword brand with a Bosch Rexroth workstation and drawer cabinet. Exhaust air capacity: 1010 m3/h Connection nozzle: 100 mm Noise level: 83 dB Inlet under pressure: 2550 Pa Voltage: 400 V, Weight: 65 kg Exhaust air speed: 32 m/s Knsdpshufbcofx Abvec Frequency: 50 Hz, Height: 1490 mm Filtration area: 6 m2 Motor power: 1.1 kW Width: 594 mm Volume of the waste container: 0.0338 m3 Number of phases: 3 Length: 670 mm Complete factory closure; large selection of storage platforms, pallet racks, shelving, and paternosters. High-quality industrial machinery, lathes, grinders, and hand tools. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, 4 x Ceramic sleeve nozzles 514736 4 x Ceramic sleeve nozzles 514736 L = 1520 mm, OD = 128 mm Knsdpfsghrmaex Abvsc You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Ksdpeg Ipp Aefx Abvonc Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull Kedogrzh Eopfx Abvenc 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), CATALOG NUMBER 7541 Technical specifications: - max. diameter of the main blade (without scoring blade) 400mm - max. diameter of the main blade (with scoring blade) 350mm - blade bore diameter 30mm - max. cutting height for a 400mm blade - 90 degrees - 120mm, 45 degrees – 85mm - max. cutting height for a 350mm blade - 90 degrees – 95mm, 45 degrees – 67mm - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on the carriage 1700mm - cutting width on the carriage 1400mm - cutting width with the guide 1350mm - main motor 6kW - table dimensions 1190x990mm - with extension 1880mm - with lengthening 1890mm - with scoring blade - max. diameter of the scoring blade 120mm - diameter of the scoring blade spindle 20mm - scoring blade motor 0.75kW - 3 types of rotational speeds 3500, 4500, 6000 rpm - brake Kjdpsztavvefx Abvjnc - diameter of the dust extraction nozzle 80, 120mm - dimensions (length/width/height) 3050x2200x1600mm - weight 800kg ADVANTAGES – Made in Poland – DTR documentation – Blade guard – With scoring blade – With extension and widening – Used saw, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Dust extraction nozzle diameter: 180 mm Knodpozg Nawsfx Abvsc Motor: 4 kW Speed: 1430 rpm Belt speed: 22 m/s Weight: approx. 700 kg Location: Customer

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kedpfevvkipjx Abvenc