Used Nozzle for sale (2,621)

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting Nljdpfx Absxyntieueh * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system Nledjzc Dg Eepfx Abujh * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun Nlsdpsxugyqefx Abuoh - Spindle cooler for 10,000 rpm - Air gun - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 Nedpjyfgzdsfx Abuolh 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper Njdpjzyu R Usfx Abujlh - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. CONDITION Used machine in very good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: used, mileage: 70,000 km, power: 110 kW (149.56 HP), first registration: 06/2019, fuel type: diesel, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Special equipment: Nledpfx Abszu Dwajush 2nd battery, trailer stabilization program, Composition Media audio system (radio/CD player, MP3 playback function), speakers (4), multimedia interface USB (iPhone/iPod) with AUX-IN, electrical package 1, exterior mirrors electrically adjustable and heated, driver assistance system: parking assistance front and rear, windows in the cargo/passenger compartment: fixed front right, without windows in the rear, tailgate with glazing, heated rear window, interior mirror with automatic anti-glare function, heated rear window with windshield wiper system, leather gear/selector lever knob, truck registration, comfort mobile phone interface, multi-function display Plus, multimedia interface 2 x USB (iPhone/iPod) with AUX-IN, spare wheel with road tires, heated windshield wiper nozzles and display for windshield washer fluid level, heated windshield wiper nozzles, display for windshield washer fluid level, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: lumbar support for the driver's seat, voice control system, additional winter tires (customer information required), permissible total weight 3.20 t (including reinforced 17" steel rims) Additional equipment: Sliding door rail cover, airbag for front passenger, can be deactivated, airbag on driver/front passenger side, exterior mirror, convex, left, exterior mirror, convex, right, floor covering in the driver's cab: rubber, driver assistance system: multi-collision brake, windshield laminated glass, tinted, glove compartment with lock, interior filter: pollen filter, body/superstructure: standard van, body variant: normal roof, fuel tank: 70 liters, steering column (steering wheel) adjustable, engine 2.0 L - 110 kW TDI, non-smoker package, wheelbase 3000 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment, right, seat cover/upholstery: fabric, steel rims 6.5x16, start/stop system for the engine, door storage compartment in the front, lining in the cargo/passenger compartment: hardboard, partially high, heat-insulating glazing.

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Dust extraction nozzle diameter: 180 mm Motor: 4 kW Speed: 1430 rpm Belt speed: 22 m/s Nljdjzg Nawopfx Abujh Weight: approx. 700 kg Location: Customer

Year of construction: 2019, operating hours: 599 h, condition: excellent (used), functionality: fully functional, Auer ST-1000 DPS semi-automatic blasting cabinet – 4 nozzles For sale: Auer ST-1000 DPS semi-automatic blasting cabinet, equipped with 4 blasting nozzles. Professional industrial blasting cabinet from Auer for efficient and uniform blasting of parts. Thanks to its semi-automatic design and four nozzles, the machine is ideal for processing products in series where a consistent and reproducible blasting result is required. The machine has been used in our production process and is offered for sale due to the cessation of our business operations. Machine specifications: Brand: Auer Type: ST-1000 DPS Semi-automatic blasting cabinet Equipped with 4 blasting nozzles Suitable for series production Uniform and reproducible surface treatment Year of construction: 2019 Operating hours: 599 Includes: extraction system / filter system / rotary table / accessories etc. Nljdpfx Aboz A Ad Sjueh Suitable for cleaning, matting, roughening, and preparing surfaces for further treatment or coating. The blasting cabinet is currently still in place and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Nledpfx Aez R Uxmobush

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, FUJI NXT placement machine / pick & place Nlodpfsz Hxbnsx Abuoh FUJI NXT M6 II (based on the M4 module) Configuration: Single-track design Current software versions (V 9.8.1) Heads: 1 H01 and 1 H12S Left-to-right running direction Very good condition. The modules are in top condition, having undergone technical refurbishment, and will be delivered ready for immediate use. In addition, we could also supply 2 additional placement heads: 1 H08 and 1 H04. Including nozzle stations. Very good condition. Inspection possible by appointment.

Condition: used, mileage: 47,789 km, power: 294 kW (399.73 HP), first registration: 04/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering configuration RIGHT, with Rotorcleaner. Operating hours as of 31.12.24: 752. Total hours: 864h. Features: ASR, BrakeMatic, single-tone horn, ESS, EBA2, Bluetooth hands-free, RIO Box, MAN Tronic, MAN Media Truck 7 color display with navigation, LGS IV, Twin Engine 1-0905, 9m³ hopper, 2,660-liter water tank including filling system, 350mm debris chute, supply broom, sweeping unit with integrated conveyor roller, LED work lights, coarse dirt intake, flap valve via inlet pipe, rear suction option with 340 liters, additional 1,500-liter water tank, Rotorclean, total water volume 3,820 liters, adjustable speed for supply brush, dual sweeping unit, 600mm suction nozzle, laterally shiftable sweeping unit (400mm), high-pressure system: 280 bar at 74 liters water per minute, high-pressure unit behind suction nozzle and supply broom, front disc brush, manual suction hose. Nsdpfx Abjyxznasuelh

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Njdpfxovvizko Abuslh Storage location: Garbsen

Condition: used, Year of construction: 2014, Nominal volumetric flow: 5087 m³/h Negative pressure: 2700 Pa Filter area: 32 m² Motor: 7.5 kW Extraction nozzle: 300 mm Dimensions: 3600 x 1590 x 2535 mm Nlsdpfxjz Tzp Nj Abujh Weight: approx. 905 kg Storage location: Supplier

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nlsdpfxevvkipo Abuoh

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program Njdpfxezzn Hle Abuolh · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant Nlodpfe Aa Nq Tex Abujh The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN Nedpjgrzh Ejfx Abuslh ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. Nljdpfxog Ipp As Abujh - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Nedpfx Abou D Arijujlh Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: new, 4 x Ceramic sleeve nozzles 514736 4 x Ceramic sleeve nozzles Njdsghrmajpfx Abuelh 514736 L = 1520 mm, OD = 128 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Acword BR100 Extractor with Workstation Metal extractor from the Acword brand with a Bosch Rexroth workstation and drawer cabinet. Nlsdpfxehufbcs Abuoh Exhaust air capacity: 1010 m3/h Connection nozzle: 100 mm Noise level: 83 dB Inlet under pressure: 2550 Pa Voltage: 400 V, Weight: 65 kg Exhaust air speed: 32 m/s Frequency: 50 Hz, Height: 1490 mm Filtration area: 6 m2 Motor power: 1.1 kW Width: 594 mm Volume of the waste container: 0.0338 m3 Number of phases: 3 Length: 670 mm Complete factory closure; large selection of storage platforms, pallet racks, shelving, and paternosters. High-quality industrial machinery, lathes, grinders, and hand tools. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher PLC control Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nedpfx Ae Adrxbobujlh Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, manufactured in 2003 - Ideal for high-quality furniture production; HPL and matte finishes are no problem - Machine is completely controlled by PLC; almost everything can be adjusted at the control panel; no defects; well-maintained machine, used with expertise. Leuco Z3 joiner cutter installed; second set of cutters available; various insert cutters available. Maximum board thickness approximately 48 mm; edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for separating and cleaning agents, controlled according to application. -Motorized, program-controlled joiner fence. -Joiner cutters 1961, 2 x 2.0 kW. -Glue system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color changes easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cuts adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable at the control panel). -Profiling blade 2 mm 1929, pneumatically controlled. -Corner copying unit 1983, carbide-tipped, with adjustment at the control panel, functional, but needs to be fine-tuned. -Straight profiling blade 1964. -Scrap conveyor, controlled according to application. Includes all operating manuals; documentation of process steps digitally and in printed form, provided by Holzher technicians. One set of DIA joiner cutters is included, as well as various insert cutters for the cutting units. Return conveyor system ZHR 15 Boomerang, manufactured in 1995. Attached to the machine, with connection to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate; sensors still available from HOMAG. -Information without guarantee; the parties agree that the sale of the used machine will take place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase.- Sale only to commercial businesses; the machine is currently powered and in operation. Nledjz Dxh Nepfx Abujh Price negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - Track width: 300mm - Shaft width: 300mm - Max cutting height: 120mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Top: - 2 rows of pawls/ejectors - Smooth, sliding pressure shaft - Pawls/ejectors - Pressure pad - Shaft with saws - Pressure pad - Smooth, sliding pressure shaft - Bottom: - Guide rail - Pawls/ejectors - Track Njdpfx Abszx U Iqjuelh - 1 feed speed + variable - Main motor power: 22kW - Feed motor: 2kW - Central lubrication - Laser - Diameter of extraction nozzle: 250mm - Table dimensions (length/width): 2000x710mm - Dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg Nlsdpfx Ajzr Izkobuoh ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)