Used Punch & Perforation Press Solutions for sale (18,710)

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 mm with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500 mm. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheets, max. 2 mm. Kjdpfx Ahszdc Iqs Dedr A tapping head TU6 is included, but it displays an error message.

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Kedpfx Ahjdzqdds Djdr Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. Kdedeqxalxopfx Ah Djr So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Kdjdpfx Asxrnggjh Djr Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: good (used), Siegmund System Perforated Grid Table incl. Silverline Profile Machining Station For sale is an extremely robust, combined industrial workstation designed for metalworking, jig construction, or precision profile manufacturing. The system is composed of top-tier premium components: 1. Siegmund System Perforated Grid Table (Base) Kdedpfx Ajztawgjh Dor - High-precision, solid welding and clamping table from the global market leader, Siegmund; highly resistant to distortion. - The perforated grid system (including perforations on the side panels) allows for the flexible and highly repeatable positioning of stops, clamping bolts, and angle brackets. 2. Silverline Clamping & Machining System (Superstructure) - Solid superstructure featuring precision linear guides for longitudinal movement. - Two parallel-mounted yellow motor heads (milling/drilling units) for simultaneous or sequential machining operations. - Three heavy-duty horizontal clamps secure workpieces firmly against the stops—ensuring rock-solid stability while protecting the material. 3. Convenient Pneumatic Control System - Ergonomic control panel at the front featuring a numbered 5-lever control system. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge (manometer) and safety emergency stop switch. - Powerful central electric motor driving the mechanical/hydraulic systems. "A complete solution from a single source: We would be happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm Kedpfx Ahox S Ehwj Dedr - Foot switch - Emergency stop button

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. Kdedpfszlpanjx Ah Dsr The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Year of construction: 2005, condition: ready for operation (used), Pressing force: 6-8 bar Air consumption: 8 l/stroke Ram stroke height: 12 mm; 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic press Schüco for Schüco punching tools Article no. Schüco: 290 124 Manual included Various crimping tools included! Tool numbers: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and fast clamping of the crimping tools The data for this listing was created using ModulMWS — software from LogoTech oHG. Manufacturer: SCHÜCO Model: Pneumatikpresse Machine type: Ksdpfx Aheyzkifo Dsdr Pressure: 6-8 bar Air consumption: 8 l/stroke Ram stroke: 12 mm : 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic Schüco press for Schüco punching tools Schüco article no.: 290 124 Manual included Various crimping tools included! Tool no.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and rapid clamping of crimping tools Data for this offer was created with ModulMWS – software by LogoTech oHG.

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video Kdodpfx Aoll A Tmjh Dor We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm Kodpfxoztfbwj Ah Djdr -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time. Kdjdsx Ry Hrjpfx Ah Der

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet Kjdpfezhudwsx Ah Dodr

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: Kodoit T Hyepfx Ah Dodr - Pressing force 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Ksdpozhlr Ejfx Ah Dodr Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1998, functionality: fully functional, PLEASE NOTE: If you purchase on August 10, 2026, or August 11, 2026, you will receive an additional discount. Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 Max. wire diameter: 12 mm Max. wire cross-section: 115 mm Max. ejector length: 90 mm Max. ejector on the punch side: 20 mm Motor: approx. 15 kW Max. output: 160 pieces/min, depending on the part to be produced Station 3: optional deburring or forming Press Biauli BF17B, year of manufacture 1998, 13 tons Oil pan: 424 kg Conveyor belt: 199 kg Kdedpfx Aezd Da Hjh Djr Control cabinet: 205 kg Platform: 186 kg Machine parts/accessories: 565 kg We sell the above items with the exclusion of any warranty for defects in materials and workmanship and without guaranteeing functionality or dimensional accuracy. We are not aware of any major defects, and the machine has functioned perfectly until recently.

Year of construction: 2000, condition: used, Empty weight: 20.200 kg Dimensions (LxBxH): 550 x 290 x 310 cm Serial number: k 3833 Kedpfxszu Nfpe Ah Dodr Max. Pressing Force: 2250 kN Max. Working Length: 4500 mm Max. Working Pressure: 300 bar Max. Stroke: 235 mm Control system: Advantech Net weight: 20,200 kg Dimensions LxWxH: 5,500 x 2,900 x 3,100 mm Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! Kodpfx Ahjzuw D Tj Dodr MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 Kodpezr Inwjfx Ah Dodr - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Kdjdpfezg U R Iex Ah Dor Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Kdjdpjztyw Hjfx Ah Dsr Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW Kedpfx Aozuv H Tsh Dodr

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Ksdpjyffqqofx Ah Djdr Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Kdedpfx Ahjztn Ado Der Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. Ksdpfjwrp Emsx Ah Dodr The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. Kjdpfxszq Eg Uo Ah Dodr The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. The maximum printing format is 1150 x 990 mm.