Used Rilesa Accelerator for sale (842)

Condition: good (used), Center height: 1,000 mm Distance between centers: 15,600 mm Maximum diameter allowed above the bed: 2,019 mm Maximum diameter allowed above the carriage: 1,625 mm Diameter of the faceplate: 1,800 mm Maximum clamping between chucks: 1,500 mm Maximum load: 75 tons Spindle motor power: 82 Approximate dimensions: Length = 21,570 mm, Width = 4,765 mm Accelerated carriage travel: 2,000 mm/min Metric thread possibilities: from 2 to 25 mm Maximum thread length: 800 mm Minimum distance from faceplate to tool: 2,000 mm Accessories: Cedpfx Abezbt S Ij Dsrg 2 faceplates with a diameter of 1,100 mm on a traveling steady rest 2 steady rests, 150 to 450 mm 2 steady rests, 450 to 750 mm 2 steady rests, 750 to 1,000 mm (on a traveling steady rest) Videos available.

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Cedpfx Abjycc Rpe Dsrg Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Condition: used, mileage: 50,279 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 2,980 mm, first registration: 08/2020, CO₂ emissions: 156 g/km, emission class: euro6, color: white, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, parking sensors, seat heater, sliding door, traction control, = Further options and accessories = - Speed limiter (ZV77) - Cruise control (ZV77) - Rear parking sensors - Front parking sensors - Right-hand side sliding door - Android Auto - Apple CarPlay - Automatic dipped headlights - Body-coloured exterior mirrors - Heated exterior mirrors - Passenger airbag - Bluetooth - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Electronic brake-force distribution - Euro 6 Crodpfx Aoyrq S Tsb Dsg - Driver airbag - Remote central locking - Hill-hold control - Wooden load area - Height-adjustable driver’s seat - Keyless Entry - Keyless Start - Air conditioning - Cornering lights - Leather steering wheel - Alloy wheels - Lumbar support - Front centre armrest - Multimedia compatible - Fog lights - Emergency brake assist - Radio - Rain sensor - Tyre pressure monitoring system - Reversing camera - Left-hand side sliding door - Seat heating - Lane keeping assist - Start/stop system - Immobiliser - Body-coloured bumpers - Connected services - WiFi hotspot - Heated windscreen - Winter package (heated seats) - Partition = Further information = General information Number of doors: 5 Model range: Sept. 2018 - May 2022 Cab type: standard Technical information Torque: 300 Nm Number of cylinders: 4 Engine displacement: 1,499 cc Transmission: 8-speed automatic Acceleration (0–100 km/h): 10.6 s Maximum speed: 183 km/h Dimensions Length/height: L2H1 Dimensions (L x W x H): 475 x 185 x 188 cm Weights Kerb weight: 1,405 kg Payload: 965 kg Gross vehicle weight: 2,370 kg Interior Interior trim: black Consumption Average fuel consumption: 4.3 l/100km Maintenance, history and condition Manuals: available APK (MOT inspection): valid until 03.2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen, Wasaweg 22, 9723JD GRONINGEN, NL

Condition: used, mileage: 628,238 km, power: 205 kW (278.72 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 6,880 kg, maximum load weight: 5,110 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, The Iveco EuroCargo ML 120 is a powerful and reliable truck designed for professional use and has proven its worth in various industries for years. Whether for freight forwarding, craft businesses, logistics companies, or regional delivery services, this vehicle offers the ideal combination of reliability, functionality, and economy. Powered by a robust 5.9-liter diesel engine, the EuroCargo impresses with its high load capacity and its ability to handle even demanding transport tasks with ease. The conventional manual transmission enables direct vehicle control and ensures efficient power transmission, especially with varying loads and different operating conditions. The Euro 5 emissions standard reflects modern and economical engine technology. With initial registration in July 2013, this vehicle belongs to a series that is appreciated for its durability and low operating costs. The mileage of 628,238 kilometers underscores the reliability and performance of this model. In the commercial vehicle sector, the Iveco EuroCargo is known for achieving high mileages while consistently demonstrating its performance capabilities. Cedpeyriidsfx Ab Dorg A particular advantage is the existing tailgate lift, which significantly simplifies the loading and unloading of goods, machines, or pallets. This allows work processes to be accelerated, personnel costs to be reduced, and delivery processes to be made more efficient. The trailer hitch further expands the range of applications and offers maximum flexibility for transport tasks with increased space requirements or additional loads. The generous wheelbase of 4,815 mm ensures stable road handling and creates optimal conditions for a high payload volume. This makes the EuroCargo ideally suited for companies that rely on a reliable and versatile transport vehicle on a daily basis. This Iveco EuroCargo ML 120 is the right choice for entrepreneurs looking for a robust, proven, and immediately operational truck. With its powerful engine, practical tailgate lift, trailer hitch, and versatile applicability, it offers everything that is required for a successful and economical day-to-day transport operation. A vehicle designed to deliver reliable performance and support your business day after day. For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 2,670 mm, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), EQUIPMENT: - Equipment: extended Day Cab - Translucent sun visor - Halogen headlights - Headlight beam for right-hand traffic - Daytime running lights - Fog lights mounted in the bumper - Camera - Central locking system with external light check function, including 2 remote controls and 2 keys with transmitter - Adjustable roof spoiler - Long side fenders - Cab color: H3275WHTE - Headlight surround and bumper color: Stone Grey - Steps and side trims, cab steps and mud guards: Stone Grey - Roof spoiler color matched to cab - Side fender color: cab color - Chassis color: grey - Air-suspended luxury driver’s seat with adjustable damping and pneumatic lumbar support. Seat cushion heating. - Armrest on driver’s seat - Fixed co-driver’s seat - Manually controlled air conditioning - Manually operated roof hatch - Electric windows - ECAS remote control - 10-year subscription to PACCAR Connect - Digital (intelligent) tachograph VDO DTCO - Speed limiter setting for cruise control/accelerator: 90 km/h - DAF infotainment system - Lane departure warning system - Electronic vehicle stability control (VSC) - Acoustic reversing warning system - Basic immobilizer - Hill start assist - Safety system that alerts the driver to moving objects on the passenger side of the vehicle - Front axle type F60 - Single reduction driven rear axle, type SR10.15 - Front axle(s): Tire size 285/70R19.5, wheel size 19.5 x 7.50 - Driven rear axle(s): Tire size 285/70R19.5, wheel size 19.5 x 7.50 - Tire supplier: Goodyear - Tire pressure monitoring system - Steel disc wheels, silver-grey - Wheel trim rings without center part, silver-grey (RAL 9006) - Front axle: Tire size 285/70R19.5, Goodyear type KMAXS2 - Driven rear axle: Tire size 285/70R19.5, Goodyear type KMAXD2 - PX-7 engine - Emission class Euro 6 - Idle shut-off automatic after 5 minutes idle time - PowerLine automatic transmission, 8 gears - PowerLine economy automatic transmission 8AP1200 - Rear axle ratio 4.63 - Driven rear axle with mechanical differential lock - Exhaust brake - Parking brake operation with inspection position - Wheelbase 5.60 m / rear overhang 2.40 m - Longitudinal frame height 270 mm, thickness 6.0 mm, without inner reinforcement Cedpfx Aboyqdkge Dorg - Plastic fuel tank, 200 liters - AdBlue® tank 30 l - Wheel chock - Deployment with drawbar, type plate, up to max. permissible GVW - Drawbar cross member, D-value 85 kN, Dc-value 70 kN, V-value 25 kN. Trailer coupling D-value 85 kN. Cross member and coupling mounted on chassis - Pneumatic connection for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connection of the trailer/semi-trailer EBS system - Connector for hardwired engine speed regulation on chassis (A068) - LED side marker lights - Body mounting preparation BAM 1, with console type B - Alternator 100 A, batteries 2 x 175 Ah - Air intake from above, behind the cab Body: Curtainsider body, internal length 7280 mm, with Palfinger tail lift C 1500 ML pro Basic body specification: - Curtainsider body - Rear portal with upper rear flap - Sliding end crossbar including trailer coupling integrated in the chassis frame, suitable for body length 7280 mm (internal length) - Tail lift Body dimensions: - External length: approx. 7295 mm - Internal length: approx. 7280 mm - External width: approx. 2550 mm - Internal width: approx. 2480 mm - Internal height: approx. 2670 mm - Side loading height: ...

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Cedozcqncopfx Ab Dorg Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: used, mileage: 168,407 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 11/2019, fuel tank capacity: 57 l, CO₂ emissions: 164 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, traction control, General information Number of doors: 4 Model range: Jun 2016 - Aug 2019 Cab: single Technical information Torque: 270 Nm Number of cylinders: 4 Engine capacity: 1.598 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 14,4 s Top speed: 169 km/h Measures length/height: L3H1 Weights Empty weight: 1.779 kg Carrying capacity: 722 kg GVW: 2.501 kg Interior Interior: black Consumption Average fuel consumption: 6,3 l/100km (45 MPG) Urban fuel consumption: 7,8 l/100km (36 MPG) Extra urban fuel consumption: 5,4 l/100km (52 MPG) Maintenance, history and condition Service history: Present APK (MOT): tested until 11/2026 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Co-driver's bench - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Hatchback - Heated steering wheel - Height adjustable driver's seat - Immobiliser Credpezg Iyiofx Ab Deg - Passenger airbag - Radio - Reversing camera - Sliding side door right - Telephone enabled with Bluetooth - Tyre pressure control

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Codpfx Abezf Eh Uj Dsrg Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2021, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details. Credpfszdiw Hox Ab Dsg • Positioning accuracy: ±0.03 mm/m • Repositioning accuracy: ±0.03 mm • Maximum no-load speed: 110 m/min • Chuck rotation speed: 100 rpm • Maximum acceleration: 1.0 G • Material processing capacity: • Round tubes: Ø20–210 mm • Square tubes: 20 × 20 mm to 150 × 150 mm • Maximum weight of a single tube: 100 kg • Bevel cutting: No • Chuck type: Standard pneumatic chuck

Condition: used, mileage: 169,434 km, power: 82 kW (111.49 HP), first registration: 11/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,100 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,080 mm, total width: 1,960 mm, total height: 2,020 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, General information Number of doors: 5 Model range: Jan 2021 - Nov 2023 Cab: single Registration number: V-80-PVB Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 1.997 cc Acceleration (0-100 kph): 16,8 s Top speed: 165 km/h Measures length/height: L1H1 Weights Empty weight: 1.762 kg Carrying capacity: 1.038 kg GVW: 2.800 kg Interior Interior: black Consumption Average fuel consumption: 6,9 l/100km (41 MPG) Maintenance, history and condition APK (MOT): tested until 07/2027 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows Credpjzibwmjfx Ab Dog - Front central armrest - Front fog lights - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Passenger airbag - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: used, mileage: 151,335 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,270 mm, first registration: 01/2019, fuel tank capacity: 69 l, CO₂ emissions: 144 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Apr 2016 - May 2019 Cab: single Technical information Torque: 210 Nm Number of cylinders: 4 Engine capacity: 1.560 cc Transmission: 5 gears, Manual gearbox Acceleration (0-100 kph): 14,7 s Top speed: 145 km/h Measures length/height: L3H1 Dimensions (LxBxH): 496 x 192 x 194 cm Weights Empty weight: 1.497 kg Carrying capacity: 1.143 kg GVW: 2.640 kg Interior Interior: black Consumption Average fuel consumption: 5,5 l/100km (51 MPG) Urban fuel consumption: 6 l/100km (47 MPG) Credpfx Absziy Eij Djg Extra urban fuel consumption: 5,2 l/100km (54 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 04/2027 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Apple CarPlay - Automatic dipped headlights - Bluetooth car kit - Co-driver's bench - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Multimedia enabled - Panelling - Partition - Passenger airbag - Radio - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light - Tyre pressure control

Condition: excellent (used), Year of construction: 2012, LICON Type: LiFLEX 1477 1U Year of manufacture: 2012 Control system: Siemens SINUMERIK 840D Solution Line with integrated PLC control S7-300. Technical data of the machine Max. travel in X: 1400 mm Max. travel in Y: 700 mm Max. travel in Z: 700 mm A-axis swivel range: 45° to –225° B-axis: 360° Acceleration: max. 5 m/s² Travel speed: max. 60 m/min Technical availability: 96% Motor spindle speed: max. 16,000 rpm Motor spindle: HSK 63 Integrated spindle Spindle motor: 25 kW at 100% duty cycle Tool holder: HSK 63 Licon - Tool magazine DTC 30 Codpfx Abszi E A Ho Derg 2 disc magazines - total 60 positions. Positioning via servo motor Tool length from spindle center: max. 400 mm Tool diameter with full occupancy: max. 90 mm Tool diameter with free spaces on the right and left: max. 200 mm Tool weight: max. 15 kg Tilting moment (HSK plane): max. 15 Nm Tool change time: approx. 5.0 sec up to 15 kg Pallet changer with zero-point clamping system. Control system: - SINUMERIK 840D Solution Line with integrated PLC control S7-300. - PCU 50.3-C: Intel Celeron M Mobile processor 1.5 GHz / 512 Mbyte / 1 Mbyte L2 cache / 400 MHz - Connection of decentralized modules such as inputs/outputs, motor starters, interfaces is carried out via Profibus. - Operator panel front OP012 with 12.1" TFT color display, 800 x 600 pixels (SVGA), - Machine control panel MCP 483C - Siemens motors of type 1FK7 are used for the feed axes. - Spindles are designed as main spindle motors 1PH7, 1PM6 or asynchronous motors, depending on the application. Coolant supply: Technical data: Tank capacity: approx. 1500 l, Filter capacity: approx. 300 l/min for emulsion, 1x rinsing pump (centrifugal pump) 3 bar approx. 150 l/min, 1x HD screw spindle pump 30 bar, approx. 80 l/min. and minimum quantity lubrication (MQL). Voltage supply: 400V, 3 phases, 50/60Hz, TN-S with a reliable neutral conductor. Total connected load: approx. 106 kW. Dimensions, see layout plan. Transport dimensions, machine only, without auxiliary units: Approx. length 830 cm, width 360 cm, height 330 cm, weight 28000 kg.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Crsdpfozq Axzox Ab Dsg Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ABB Robotics IRB 1600-8/1.45 robot, serial number 67099, manufactured in 2004. The ABB Robotics IRB 1600-8/1.45 (with IRC5 M2004 controller) is a robust 6-axis industrial robot known for its high reliability, short cycle times, and path accuracy. Technical data: Max. payload: 8 kg (or 8.5 kg) Max. working range (reach): 1450 mm (1.45 m) Year of manufacture: 11/2011 Repeatability: 0.02 mm Controller: IRC5 M2004 Protection class: Standard IP54 (optional FoundryPlus 2 / IP67) Mounting options: Floor, wall, inclined, or suspended Application areas: Cedpfxezm E N Ij Ab Dsrg The robot is ideally suited for gluing, material handling, machine tending, arc welding, and deburring/grinding. It utilizes ABB's QuickMove and TrueMove motion control for maximum precision at high speeds. Key advantages: The IRB 1600 has cycle times up to 50 percent shorter than competing robots in material transport, machine maintenance, and process applications. It accelerates and decelerates faster than other robots, saving time between tasks. This is made possible by ABB's patented second-generation QuickMove motion control, combined with the robot's powerful motors and low friction losses in the bevel gears. Bevel gears with low friction and no unnecessary movements, thanks to QuickMove and TrueMove, reduce power consumption to 0.58 kW at maximum speed and even less at low speeds. The airborne noise level is only

Condition: used, mileage: 139,088 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 10/2020, fuel tank capacity: 70 l, CO₂ emissions: 185 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, General information Number of doors: 5 Model range: Mar 2019 - Aug 2022 Cab: single Technical information Torque: 270 Nm Number of cylinders: 4 Engine capacity: 1.499 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 19,6 s Top speed: 145 km/h Measures length/height: L2H2 Dimensions (LxBxH): 496 x 192 x 194 cm Weights Empty weight: 1.635 kg Carrying capacity: 1.195 kg GVW: 2.830 kg Interior Interior: black Consumption Average fuel consumption: 5 l/100km (56 MPG) Urban fuel consumption: 5,5 l/100km (51 MPG) Extra urban fuel consumption: 4,8 l/100km (59 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 11/2026 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Bluetooth car kit - Co-driver's bench - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front and rear parking sensors - Front central armrest - Front fog lights - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Panelling - Partition - Passenger airbag - Radio - Rain sensor - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth Cedpfx Asy Uvvwjb Derg - Third brake light

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: Yes, for both spindles • Condition: Good, properly working; regular maintenance since 2008 Additional equipment • Gantry loader with reverse turn unit • Work stocker: 2 units (expandable to 4) • Chip conveyor Crjdpfey Ndu Djx Ab Dog • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 71,984 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 02/2021, fuel tank capacity: 70 l, CO₂ emissions: 177 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Mar 2019 - Aug 2022 Cab: single Technical information Torque: 270 Nm Number of cylinders: 4 Engine capacity: 1.499 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 19,6 s Top speed: 145 km/h Measures length/height: L2H1 Dimensions (LxBxH): 496 x 192 x 194 cm Weights Empty weight: 1.635 kg Carrying capacity: 1.000 kg GVW: 2.635 kg Interior Interior: black Consumption Average fuel consumption: 4,9 l/100km (58 MPG) Urban fuel consumption: 5,4 l/100km (52 MPG) Extra urban fuel consumption: 4,7 l/100km (60 MPG) Maintenance, history and condition Service history: Present APK (MOT): tested until 02/2027 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Co-driver's bench - Driver's airbag - Electrically adjustable door mirrors - Electrically folding door mirrors - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Panelling - Partition - Passenger airbag - Radio - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right Codpfx Aey Em Aisb Djrg - Start / stop system - Telephone enabled with Bluetooth - Third brake light

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm Cjdpfx Abjy Enr Ee Dorg • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 3,800 km, power: 70 kW (95.17 HP), first registration: 06/2025, fuel type: electric, next inspection (TÜV): 06/2028, color: black, gearing type: automatic, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Comfort package, exterior mirrors electrically adjustable and heated, both sides, camera with parking assist front and rear with parking sensors on the sides, heated front seats, rear seat split / foldable Additional equipment: Cjdpfxozqhvxo Ab Djrg 4 speakers, airbag driver/passenger side, ambient lighting, anti-slip regulation (ASR), dashboard in color (vehicle color), automatic lighting function (follow me home), exterior mirror caps painted red, passenger airbag can be deactivated, parking assist rear, automatic activation for headlights / light sensor, electric motor 70 kW (continuous 43 kW), driving mode selector, vehicle key in stone-look, power windows front with comfort operation, floor mats, smartphone holder, illuminated glove compartment, rear lights LED, heated rear window, high-voltage battery 23.8 kWh (lithium-ion), inductive charging cradle for smartphone (wireless charging), infotainment system: UConnect 5 with navigation system, DAB+ and Bluetooth hands-free system (touchscreen 10.25"), instrument display color display, 7 inches, body: 3-door, head airbag system front, headrests rear, charging cable with Type 2 plug (Mode 3), steering column (steering wheel) height adjustable, memory function for driver's seat front left, mobile online services UConnect Live, fog light rear, emergency call system (eCall), One Pedal Drive (electronic accelerator pedal), parking brake electric, radio reception digital (DAB+), quick charging function 50 kW (DC), side airbag front, seat cover / upholstery: fabric, smartphone interface (Apple CarPlay & Android Auto), special paint red, sun visors with mirror (illuminated), socket (12V connection) front, USB interface, heat protection glazing

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Crjdpozd Alzsfx Ab Deg Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg Credpfx Aezd Dz Rsb Dog • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Cjdpszdnnujfx Ab Djrg Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Crjdpfx Ajzc Dyreb Dsg Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), functionality: fully functional, Discover the LUTETIA T3 Churn, an essential piece of equipment to enhance your marinating processes and improve the quality of your meats. Its vacuum system accelerates flavor penetration while preserving the hydration of the ingredients. Furthermore, its stainless steel construction ensures optimal hygiene and quick maintenance. Furthermore, its custom-designed dimensions allow for seamless integration into different production facilities without the need for complex configurations. This gives you greater flexibility when you want to expand your product range. Cjdpsv Uxatsfx Ab Djrg Then, the meat and brine capacity, estimated at 1,450 kg, is a real asset for processing large volumes without sacrificing mixing consistency. With this churn, you'll also reduce wasted time, as its user-friendly interface makes it easy to learn. Furthermore, its dynamic operation limits lump formation, enhancing the final presentation of your preparations. Finally, this robust machine can withstand high production rates and offers a long service life, even in an intensive environment. In addition, its airtight lid maintains a stable internal climate and prevents external contamination, a key factor in the food industry. Contact us now to discover how the LUTETIA T3 Churn can enhance your processing operations. You'll benefit from superior performance and precise recipe control, two essential elements for satisfying demanding customers. Technical specifications: Dimensions: L 2782 mm × W 1450 mm × H 2020 mm Capacity (meat + brine): ~1450 kg Operation: Vacuum-sealed for rapid marinating Structure: Stainless steel for enhanced hygiene Weight: ~1500 kg (estimated) for greater stability t7jlRcke

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints Cedpfxex U Ayve Ab Dsrg • Gas-powered design for mobile, flexible operation on job sites • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Weed removal and surface cleaning ahead of maintenance • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!