Complete painting plant

Cefla MITO 2B

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Bsdpfx Aismiik Tewsww Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. Bwedpfxsy Ehrxo Aiwew SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit Bwedpfszutrasx Aiwew The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t Bedjwywgbspfx Aiwoww

Condition: used, machine/vehicle number: 007926, Max. working width: 1300 mm Drying system: warm air Hot air: yes vertical baskets: yes no. baskets: 48 Bodpfx Aisyhbkljwjww panels / vertical chambers: yes no. panels / vertical chambers: 2

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation Bodpsq Ev R Sefx Aiwoww - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: used, Year of construction: 2001, Bottom / right / left / top with Centro Fix cutter heads. Min/Max. working width (finished dimension): 23 - 180 mm Min/Max. working height (finished dimension): 6 - 105 mm Min. workpiece length: 300 mm Feed rate: 6 / 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindles: 7.5 kW Motor power, vertical spindles: 5.5 kW Bodpfx Aoym D Eioiwsww Feed motor power: 1 kW Diameter of feed rollers: 120 mm Dust extraction nozzle, 1 piece: 150 mm Dust extraction nozzle, 2 pieces: 120 mm Weight: approx. 950 kg Location: Nattheim

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Bjdox Iggyepfx Aiwsww Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Bwedpfx Aer Arrwoiwow Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Condition: used, Year of construction: 2019, functionality: fully functional, KUPER FWS 1250 Veneer splicing machine for sale! Currently in production, available in January 2027. Bwsdpfx Aiszu Auqowjw For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Feed speeds: 15 / 30 / 45 / 60 m/min Veneer thickness: 0.3–3.0 mm Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA