Used Robopac Starbox 50 for sale (33,721)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Dodozb Uz Depfx Abajkn Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. WRAS Approved Model type: UKE-8-4PV-8 Dkjdpfx Abozbrv Esasn Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Dkodox Axbcepfx Abaen

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Dksdpottwt Asfx Abajn

Condition: like new (used), Year of construction: 2019, operating hours: 794 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller model: Siemens, overall weight: 7,750 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 60, We offer an DMG DMU 50 in great condition with only 794 hours. Machine will be in stock next week. Machine has following options: - Siemens 840D SL - Speedmaster Motorspindel 20.000 RPM 35 kW / 25 kW Torque 130 Nm / 86 Nm) SK40 - 60 tool automatic tool changer - Chip conveyor - Swivel table 630 x 500 mm - Internal coolant 20 bar - External air coolant - Air true spindle - Rotating clear view window - Spray Gun Dkjdpfxjzb Em Ro Abaen - Oil and emulsion mist separator - Touch probe Heidenhain TS460 - Tool measuring device Heidenhain TT160 - 3D quick set - Electronic handwheel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Serial number - RMST.1774.06. Date of manufacture - 2006 (never used). Dodpfsymzz Isx Abaskn Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with approx. 90 x trays and fitted with a brand new belt.

Condition: good (used), Year of construction: 2007, operating hours: 443 h, color: blue, Mast: articulated arm Working height: 5.000 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 2000 m Production country: DE Please contact Vink Machinery for more information Teupen Leo 50 GT * 2007 * Diesel and 380 volts * 443 working hours!! * 50 meters working height * 20 meters horizontal range * 200 kg lifting capacity * Adjustable tracks Dkodsr Hn H Djpfx Abaen * Remote control * Stamp machine * 13510 kg own weight * Including manual

Condition: excellent (used), Year of construction: 2021, Mileage: 2.021 km Drive: Wheel Empty weight: 408 kg Technical condition: very good Visual appearance: very good Transport dimensions (LxWxH): 3,1x1,5x1,95 Production country: NL Please contact Vink Machinery for more information Frisian Motors Leffert FM-50 * 2021 * Lithium battery drive * 1833 km Dkodpox I Rawsfx Abajn * Dutch license plate * 3 speeds * Top speed 50 km/h * Glass windshield with wiper * Polycarbonate rear window * Tow bar * Built-in charger

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres Djdpfx Aozbxyqobajkn PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Dodpjzbxxaefx Abajkn Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2021, condition: as good as new (ex-display), Due to order cancellation Dsdpfx Aezau Etjbaekn 2 x new Tersa planing heads D140x130x50 All original Swiss Made. It doesn't get any cheaper! One-time super cheap set offer

Condition: used, mileage: 100 km, power: 390 kW (530.25 HP), first registration: 05/2026, fuel type: diesel, overall weight: 28,000 kg, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, soot filter, tail-lift, Additional information: * Payload: 13516 kg * Wheelbase: 670 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2000 kg * Tail lift | Type: Tilting and sliding tail lift Additional features: * 9-ton front axle * Adaptive cruise control * Aluminum fuel tank Dedpfx Ajy Ng Ugobajkn * Anti-lock braking system * Anti-slip regulation * Automatic climate control * Heated mirrors * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * Speed limiter * Cruise control * Intarder * Camera * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particulate filter * Rain sensor * Retarder * Disc brakes * SemCollection * SemStars * Auxiliary heater * Stand-alone air conditioning * Power take-off (PTO) * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request you to inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, axle configuration: > 3 axles, first registration: 04/2011, loading space length: 8,400 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75R17,5, wheelbase: 1,360 mm, Year of construction: 2011, Suspension: air suspension Dkjdpszcdpgofx Abasn Axle 1: Tyre size: 235/75R17,5; Double wheels Axle 2: Tyre size: 235/75R17,5; Double wheels; Steering Axle 3: Tyre size: 235/75R17,5; Double wheels Axle 4: Tyre size: 235/75R22,5; Double wheels Drive: Wheel GVW: 40.000 kg Height of cargo floor: 100 cm = Additional options and accessories = - Towbar

Condition: used, mileage: 600,210 km, power: 427 kW (580.56 HP), first registration: 09/2019, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Aluminum fuel tank - Alloy wheels - Engine brake - Particle filter - Headlights - Side skirts - Visor Dksdpszcdc Hjfx Abaen - Alternating current - Tool box = Additional Information = Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65 R22.5; Alloy wheels; Steerable; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Rear axle: Tire size: 315/70 R22.5; Double tires; Alloy wheels; Tire tread depth left outer: 4 mm; Tire tread depth right outer: 4 mm Unladen weight: 9,459 kg Payload: 9,665 kg GVWR: 19,124 kg Damage: None

Condition: good (used), Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, Mechanical jack 50 ton -Type: JJ-5013 -Stroke: 125 mm Dkedpfei Hmnzsx Abaen -Shaft: Ø 87 mm -Number: 2x lifting jack available -Price: per piece -Dimensions: 280/220/H295 mm -Weight: 30 kg/piece

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm Dkjdpfx Absxln N Isasn -Number: 3x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Bito Type: PL 38 Included in delivery are: 01x pallet rack traverse, used Material color: blue box profile: 127 x 50 mm type of truss: PT36.127SN agraffe: 3 HK (hooks) clear width: 3.600 mm max. load per truss pair 2.400 kg, with evenly distributed load 02x safety pins, used Dsdsnfvnuepfx Abaokn design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: Speedlock P90 Included in delivery are: 01x pallet rack traverse, used material color: sendz. galvanized box profile: 120 x 50 mm type of truss: SLB 120|15 agraffe: 5 HK (hooks) clear width: 3.300 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams Djdpfsng Hdijx Abaekn against unintentional lifting out

Condition: good (used), Technical data for the pallet racking traverse: Dkedpenh H Dmsfx Abasn Racking system: Dexion Type: Speedlock P90 Included in delivery are: 01x pallet rack traverse, used Material color: light blue box profile: 100 x 50 mm type of truss: SLO 102|2 agraffe: 5 HK (hooks) clear width: 3.300 mm max. load per truss pair 1.300 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), The scope of delivery includes: Dksdpsld S Ufjfx Abajn 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS In the trusses are from the top, bottom & front view each 2 holes with a Ø of approx. 16 mm! These are used for diagonal bracing! Included in delivery are: 01x pallet rack traverse, used Material color: orange U-profile : 150 x 50 x 3,00 mm execution: head traverse agraffe: 4 HK (hooks) Dkodpfxolgzqcs Abasn clear width: approx. 1.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: Dedslhp Tcopfx Abajkn 198x depth bars, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg Note: The unit price is only valid for a purchase quantity of at least 198 pcs (01x pallet).

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm Dkodpfxeipugge Abaon for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dkjdpfx Aeiimtqebasn Technical data of the pallet rack traverse: Racking system: META (Thyssen) Included in delivery are: 01x pallet rack traverse, used Material color: orange type of truss: HN 100|20 box profile: 100 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.100 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer a new square tube for sale here. Included in the scope of delivery: 01 x square tube, new Material color: hot-dip galvanized Overall length: 6.050 mm Profilabm.: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Dedpfedzq Scox Abaskn Production according to: EN 10219-1 Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)