Used Robuste Kaiser Fourgon for sale (5,273)

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Hfodpfxezix U Ao Af Hei Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Brabender Model: 920000 Brabender AQUATRAC® Station – Moisture Analyzer – Laboratory with Precisa Analytical Balance 0.1 mg – 120 g Hsdpfx Aozix Ngsf Hjfi For sale is an AQUATRAC® Station by Brabender Messtechnik – a professional laboratory device for precise determination of water content in powders, granulates, and other solid materials. The device is ideally suited for quality assurance, research, and production, and is used worldwide in industrial and laboratory settings. Features: • Precise thermogravimetric moisture measurement • Integrated touchscreen • Internal data storage • USB and Ethernet interfaces • Robust industrial/laboratory construction Technical data: Model: 920000 Year of manufacture: 2019 Mains voltage: 85–265 V AC Frequency: 47–63 Hz Power consumption: approx. 0.6 kW Connections: 3× USB, Ethernet Dimensions: approx. 60 × 45 × 35 cm (W×D×H) Weight: approx. 30–35 kg Precisa Analytical Balance 0.1 mg – 120 g Description: For sale is a high-precision analytical balance from Precisa (Switzerland), 321 LS Series / Type 120A. The balance is ideally suited for laboratories, pharmacies, research, industry, or education. Thanks to the enclosed glass draft shield, very precise and stable measurement results are possible – even for the smallest weights. Technical data: Max weighing range: 120 g Readability: 0.0001 g (0.1 mg) Minimum weight: 0.01 g Digital display Tare function RS232 interface Power supply: 12 V DC / 6 W Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2018, condition: excellent (used), Julabo Model: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are operational, and the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology - Cooling of plastics, lasers, or systems Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Casters for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Hodszix D Dopfx Af Hjfi Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Charge: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): - Approx. 1.3 kW at –20 °C - Approx. 5.5 kW at 0 °C - Approx. 7.4 kW at +20 °C Connections & features: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Mobile base with casters Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Connection cable Shipping: Freight shipping on a pallet (by arrangement, shipping costs depend on destination) Collection: possible by prior appointment. (Technical data may be subject to change or errors. Details without obligation!) For further questions, we are happy to assist you by phone.

Year of construction: 2021, condition: new, Julabo Model: FLW20006 Julabo FLW20006 Recirculating Chiller / Cooling Unit 400 V Year of manufacture: 2021 – Mint condition For sale is a Julabo FLW20006 recirculating chiller suitable for laboratory and industrial applications. This unit was manufactured in 2021 and has never been put into operation, thus it is in mint/unused condition. The recirculating chiller is water-cooled and ideal for demanding process and machine cooling tasks. Premium Julabo industrial quality, robust design, mobile on casters. Key features: - Mint condition / unused - Water-cooled - Digital temperature control - RS232 interface - Alarm contact - Heavy-duty industrial build - Mobile on casters Technical data (according to nameplate / manufacturer's specifications): Manufacturer: Julabo GmbH Model: FLW20006 Year of manufacture: 2021 Degree of protection: IP21 Hfodpfx Afezix Dws Hji Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 18 A Refrigeration technology: Refrigerant: R452A Charge: 2750 g Operating pressure HP / LP: each 26 bar CO₂ equivalent: 5.88 t GWP: 2140 Temperature data (FLW series): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1200 × 600 × 800 mm Weight: approx. 220–240 kg Shipping & Delivery: Condition: Mint / unused Scope of delivery: - Julabo FLW20006 recirculating chiller - Power cable Shipping type: Freight shipment on pallet (by arrangement, shipping costs depend on destination) Collection: By appointment only. (Specifications subject to change or error!) For further questions, feel free to contact us by phone.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Hsdpfx Aszixyfsf Hjfi Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Hfsdpfx Aecnw U Djf Hoi Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Hfedocr S Ecopfx Af Hji Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Hsdpfelht Hwjx Af Hofi Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee. Hodpjd R Ev Defx Af Hjfi

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Hjdpfx Ajdqy Uqef Hefi Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side Hfjdpfecnxayox Af Hji No hose is needed that extends around the machine

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Hfodpfx Ajcnxa Sof Hsi Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: like new (used), Year of construction: 2024, On behalf of the customer: €12,150 Technical data: - Engine - Mitsubishi - Power 18.5 hp - Cylinders 3 - Bore / Stroke 70/78mm - Displacement 900cc - Rated speed 2700 rpm - Max. torque 55 Nm at 1600 rpm - 7-pin socket - Hydraulics - Automatic depth control Yes - Lift position control Yes - 3-point linkage, Category 1 - 1 double-acting control valve at the rear - Lifting capacity on the lifting balls 590kg - Brakes Disc brakes, dry - Parking brake - Transmission 6F + 2R - Transmission Mechanical, sliding mesh - Speeds - Min. driving speed 1.24 km/h at 2700 rpm Hfedpfxszb Agus Af Hei - Max. driving speed 18.5 km/h at 2700 rpm - PTO - 540, 900 rpm Mechanical - Steering system Power steering - Dimensions and weights - Total weight 625 kg TÜV (technical inspection) - valid until 05/2027 - The vehicle is two years old. The Fieldtrac has been used very little and therefore has very few operating hours. The vehicle is in very good condition, both technically and visually. The first service has already been carried out, so nothing stands in the way of immediate use. The offer includes a rear-mounted forklift including accessories, including: Grapple bucket - Soil tiller 95 cm, used only once!! Original wheel set with AS tires Thanks to the various tire options, the vehicle can be used flexibly. The Fieldtrac impresses with its robust design, high maneuverability and versatile applications. Ideal for farms, agriculture, and equestrian facilities. Highlights at a glance: - Little used / few operating hours - First service already carried out - Rear-mounted forklift with accessories - Very well-maintained condition Location: at the customer's location - immediately available - Sold on behalf of the customer.

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale Hedpfxshkz E Ts Af Hsfi

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Hfedshk Dfrepfx Af Hei Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Foldable outfeed table extension (without top) Hsdjk Dpp Sepfx Af Hefi C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, The Hebrock F 2 Hfsdpfx Aelht Hzjf Hei The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Hjdpfevk Scgox Af Hefi Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Hfedoff Hdpspfx Af Hji Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Hjdsn D Arhspfx Af Hsfi Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 2 Hfjdpfxji Am U De Af Hei The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Hjdpfx Aecnz Iqjf Hsfi Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Hfodpfxjhk S Sdj Af Hsi Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Hsdpfx Afshk S Slo Hofi Maximum negative pressure 2000 Pa Scope of supply: Two filter bags, two chip collection bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Heavy-duty, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Super Silent sound insulation to reduce saw blade noise Hfjdpfeihahbox Af Hji Electromagnetic motor brake Saw weight: approx. 910 kg Cutting depth: 60 mm Saw motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Saw blade bore: 30 mm *1 Emission sound pressure level at the workstation LpA: 82 dB *2 Saw blade speed: 5250 rpm 2 extraction ports: ø 100 mm Connection value: 4.8 kW Mains connection: 3 x 400 V / 50 Hz Cutting range: L: 4600 mm; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - VSA scoring saw, stepless adjustment - Strip stop - Mechanically braked support rollers - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Photo shows optional digital display, which is not included in the offer.