Used Shinohara Offset Printing Type for sale (40,319)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Nodehg Rcxopfx Akcjld Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Nodpfxowhvq Is Akceld Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, Nedpfxowqcrqe Akceld - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,347 h, functionality: fully functional, machine/vehicle number: 190347, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, controller model: Heidenhain TNC 430 B, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS 6 axes (X, Y, Z, table C, swivel head A, B) Travel range X-axis: 3,000 mm Travel range Y-axis: 1,600 mm Travel range Z-axis: 1,500 mm Nledpfozku Sgsx Akcjd Table size (2x): 2,000 x 2,000 mm Table load: 10 t Spindle speeds: 60 - 3,600 rpm Spindle mounting: ISO 50 MACHINE DETAILS Control system: Heidenhain TNC 430 B digital Number of controlled axes: 6 Milling drive: 28 kW Total power consumption: 48 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 47 t Program runtime: 22,347 h EQUIPMENT Integrated coolant supply (ICS) 40-position automatic tool changer Chip conveyor High-speed spindle (30,000 rpm) 2 pallets

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,616 h, functionality: fully functional, machine/vehicle number: 184640, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, controller model: Heidenhain TNC 430 B, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 3,000 mm Travel in Y-axis: 1,400 mm Travel in Z-axis: 1,500 mm Table size: 3,200 x 1,100 mm Table load: 10 t Nledpfx Akezku R Ascjd Spindle speeds: 60 - 4,000 rpm Spindle mounting: ISO 50 MACHINE DETAILS Control system: Heidenhain TNC 430 B digital Milling drive: 22 kW Total power consumption: 50 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 22 t Program run time: 25,616 h Machine operating hours: 53,291 h Control system operating hours: 55,029 h EQUIPMENT 20-position automatic tool changer Milling head automatically swivels and rotates in 1.5° increments Chip conveyor Adaptable high-speed spindle (30,000 rpm) Mist coolant system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS Travel in X-axis: 2,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,100 mm Maximum workpiece weight: 5,000 kg Clamping area (L x W): 2200 x 850 mm Number of T-slots: 5 Width of T-slots: 22 mm T-slot spacing: 150 mm Feed rate in X/Y/Z axis: 10,000 mm/min Rapid traverse rate in X/Y/Z axis: 20,000 mm/min Spindle speed: 60 - 3,000 rpm Swivel range of the milling head: -180°/+177.5° Positioning of the milling head angle: Automatic in the A+B planes Positioning accuracy: ±0.014 mm Repeatability: ±0.008 mm Ball screw diameter in X/Y/Z axis: 63 mm Ball screw pitch in X/Y/Z axis: 16/10/10 mm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Motor power: 38 kW Nljdjzmfn Depfx Akcjd Power of the hydraulic unit: 1.8 kW Operating pressure of the hydraulic unit: 110 bar Capacity of the hydraulic unit tank: 100 l Delivery rate of the hydraulic pump: 9 l/min Power of the cooling unit: 1.36 kW Air pressure: 6–7 bar Air flow rate: 50–225 l/min Power supply: 400 V; 50 Hz Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,000 x 2,900 mm Total weight: 14,000 kg EQUIPMENT Two-stage spindle speed control

Condition: used, Year of construction: 2007, operating hours: 39,215 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 4,000 rpm, controller model: Fanuc 18i-MB, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,100 mm Table dimensions: 2,700 × 850 mm Table load capacity: 6,000 kg Spindle connection: ISO 50 – DIN 69871 AD Spindle power: 22/26 kW Spindle speed: 60–4,000 rpm Gear stages: 2 Working feed rate: 20 m/min Rapid traverse rate: 10 m/min Axes: A- and B-axes Division: 2.5° MACHINE DETAILS CNC control: Fanuc 18i-MB Nsdpozmw I Ajfx Akcjld Coolant pressure through the spindle: 23 bar Machine weight: 16 t Operating hours: 39,215 h EQUIPMENT Automatic 2-axis swiveling head for the A- and B-axes Two-stage spindle gearbox Coolant supply through the spindle at 23 bar Note: The functionality of the spindle cooling system was not tested prior to the auction. A surcharge of €500 will be applied for the necessary equipment if container loading is required.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 2,000 kg, product length (max.): 2,000 mm, product width (max.): 980 mm, production capacity: 180 unit/h, TECHNICAL DETAILS Print head manufacturer: Kyocera Number of print heads: 4, 8, or 12 Number of print stations: 2 or 3 Color channels with 4 print heads: CMYK Color channels with 8 print heads: CMYK + KYMC or CMYK + 4 × White Color channels with 12 print heads: CMYK + KYMC + 4 × White or CMYK + 8 × White Print format with frame, with 2 or 3 print stations: max. 400 × 500 mm Frameless print format, with 2 or 3 print stations: max. 600 × 900 mm Frameless print format, with 1 print station: max. 2,000 × 980 mm Printing speed: up to 180 pieces/hour Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Operating system: Linux RIP software: aeoon RIP software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Nedpfx Akezmr Azecsld Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 4,100 × 2,900 × 2,000 mm Machine weight: 2,000 kg

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20082440, overall weight: 1,500 kg, product length (max.): 1,200 mm, product width (max.): 800 mm, production capacity: 150 unit/h, TECHNICAL DETAILS Printhead manufacturer: Kyocera Number of printheads: 4 or 8 Number of print stations: 2 Color channels with 4 printheads: CMYK Nlsdpfezmr Ahjx Akced Color channels with 8 printheads: CMYK + KYMC or CMYK + 4 × White Printing speed: up to 150 pieces/hour Printing format with frame at 2 print stations: max. 400 × 500 mm Frameless printing format at 2 print stations: max. 500 × 700 mm Frameless printing format at 2 print stations: max. 1,200 × 800 mm Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Operating system: Linux RIP software: aeoon RIP Software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 2,800 × 2,200 × 1,700 mm Machine weight: 1,500 kg

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Njdpfx Akezfh U Doceld Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Spindle Taper 50 Nlodpfx Akjyx Hv Ascod Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Rapid power traverse to all motions 2,000mm/min Complete With: Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: used, Dean Smith & Grace Type 13 - 1SB Lathe, Overhead Guards, Swivel Toolpost Turrret, 30" Travel, 6" Swing Over Bed, 6 DI Camlok (No Chuck), Spindle Speeds 16.8 - 750rpm (High & Low), Screw Cutting Chart. S/No. 31613 1 - 58. Country of Origin: United Kingdom Nljdoznkp Aspfx Akced Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 1989, functionality: unexamined, Star SR-20 type 530J sliding head CNC lathe Year (1989) with Fanuc Series 16-T control Nlodezmamnopfx Akcjd Parts conveyor (belt missing) Cromer swarf conveyor (1995) Donaldson Torit oil mist filter FMB Turbo 3-26 barfeed

Condition: used, Year of construction: 2021, functionality: unexamined, Star SB-20R type G sliding head CNC lathe Year (2021) with Fanuc Series Oi-TF control Filtermist S400 oil mist filter Nledpfjzmahrsx Akced Parts catcher & conveyor LNS Turbo HB swarf conveyor FMB Turbo 2-20 / 3200A barfeed 3 available - 2 manufactured in 2021 and 1 manufactured in 2015

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing Nledpfx Akjwwk Tvecjd

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nedpfszi Tqljx Akcjld

Condition: ready for operation (used), Konica Minolta Accurio Press C 3080 with only 830,000 copies, in perfect condition, tested and ready to print! Equipment: FS 532 PI 502 RU 518 m PF 707 m Sd513/513f IC 605 As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet shipping, to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Nlodoznufzjpfx Akcjd Please do not hesitate to contact us for further information.

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total counter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. Nlodszpyfiepfx Akced 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. 📱 Print directly from USB, network, email, and mobile devices (AirPrint, HP Smart, HP Click). 🖥️ 15-inch touchscreen for easy operation. 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and extensively tested by our own specialized technical service. If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Year: 2015 Nlodpfsznwwaox Akcsd Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: used, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 760 mm, table width: 2,000 mm, Sachman Model R Nsdpfowtfvqex Akcold Table size 2000 x 560 Travel: X 1600 Y 700 Z 760

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. Nlsdozfh Uqopfx Akcjd - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Nsdpfx Akezd Urgscsld

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Lexmark XM5365” black-and-white production system Item for sale: 1x Lexmark XM5365 with the following features: Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Nedpfx Akszpw Nfecsld Counter readings: Total: Approx. 2,931 Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of the device undergoing a functional test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Canon imagePRESS V1000” black-and-white production system. Items for sale: 1x Canon imagePRESS V1000 with the following features: Includes Prisma Controller Includes Paper Deck E1/Bypass D1/ Includes Booklet Finisher AF1/Sensi Includes Duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Counter Readings: Total: Approx. 3,779,299 pages Condition: This listing is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for proper function Packaging and Shipping: Nledpjzpwnbsfx Akcjd You’re welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re also welcome to contact us directly.

Condition: excellent (used), Year of construction: 2006, Rotogravure Printing Line with 3-Stage Rotary Die Cutter – 660 mm / 200 m/min High-capacity roll-fed rotogravure printing and converting line designed for large production runs of labels, cigarette cartons, pharmaceutical boxes and other folding-carton packaging. The machine combines printing, coating, drying, embossing, creasing, perforating, rotary die cutting, waste stripping and product delivery in one continuous production process. Main technical specifications Printing process: Rotogravure Number of printing units: 7 Materials: Paper and cardboard Substrate weight: 60–300 gsm Maximum reel diameter: 1,800 mm Core diameter: 300 mm Nlsdpfx Aszpfpajkced Maximum web width: 660 mm Maximum printing width: 640 mm Printing repeat range: 360–760 mm Maximum rotary die-cutting width: 660 mm Rotary die-cutting repeat: 535–800 mm Maximum production speed: Up to 200 m/min Print-to-print register accuracy: ±0.10 mm Print-to-cut register accuracy: ±0.15 mm Electrical supply: 400 V, 3-phase, 50 Hz Web direction: Right to left Unwinding and web control The line is equipped with a dual-reel automatic zero-speed splicing system. Printing and drying Seven rotogravure printing stations provide high-quality, repeatable color production. The printing units include adjustable doctor-blade systems, controlled impression pressure, ink circulation and viscosity-control equipment. Three supplementary ink trolleys are included. Space is available for the possible installation of an additional printing unit. The high-efficiency drying system provides: Electrical heating capacity: 50 kW Air volume: 7,000 m³/h Air velocity: 40 m/s Adjustable temperature and air recirculation Normal and UV varnish applications are possible, depending on the installed coating and curing configuration. Three-stage rotary finishing system This line is particularly suitable for manufacturers requiring large-volume, high-quality packaging production with printing and finishing completed in a single pass. rotogravure printing machine, gravure printing press, used rotogravure machine, 7 color rotogravure machine, 7 colour printing press, web-fed gravure press, roll-to-roll printing machine, packaging printing machine, packaging converting line, cigarette box printing machine, cigarette carton printing machine, tobacco packaging machine, cigarette packaging production line, folding carton printing machine, pharmaceutical carton printing machine, medicine box printing machine, paperboard printing machine, cardboard printing press, label printing machine, inline rotary die cutter, rotary die-cutting machine, rotary die cutter for paper, rotary die cutter for cardboard, embossing and creasing machine, carton die-cutting machine, inline finishing machine, roll-to-sheet machine, industrial sheeter, automatic reel splicer, non-stop reel splicer, register control printing press, The universal sheeting system provides a variable cutting length of 500–1,000 mm. Maximum production speed in sheeting configuration is approximately 140 m/min. The high-pile delivery can stack sheets directly onto pallets. Pallet changes and sample removal can be performed without stopping production. High-pile receptacle Voltage stabilizer The exact cylinder, cassette, tooling and spare-parts inventory should be confirmed during machine inspection.