Used Sick Otd2-1312 for sale (237)

Condition: used, Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake PRESS BRAKE HYDRAULIC CAPACITY: 80 TONS BENDING LENGTH: 2500mm CONTROL: OPERATEUR NO OF AXIS: 7 FRONT GUARDS ERWIN SICK MACHINE MOUNTED SIDE AND REAR Ledsfuaqmjpfx Ah Soru INTERLOCKEDFENCING

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm Lrjdpozrppvefx Ah Sju table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Ledpfx Asg Iihwjh Seru Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Year of construction: 2010, Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Lrodpswblk Rsfx Ah Ssu Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic CNC press, 100 tons (1,000 kN) pressing force Siemens SPS1200 series 10" Beijer display Stroke 400 mm Table size 790 mm x 600 mm Lodpenp Ndhjfx Ah Seru Feed speed 110 mm Return speed 140 mm Sick light curtain Remote maintenance module installed Rexroth hydraulics with cooler Modifications can be implemented upon request Upon request, the manufacturer can supply C-shaped frames for presses with a pressing force of 10 tons to 400 tons and variable dimensions.

Condition: used, Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT45-P660 -Connector: DC 10-60V -Number: 2x sensors available -Price per piece -Total dimensions: 105/60/H180 mm / 170/90/H110 mm Ledpfx Asdnllroh Ssru -Weight: 0.7/0.8 kg/pc.

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Lodpfxjuy T I Ho Ah Ssru

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 187 h, lifting height: 7,800 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 800 mm, transport height: 199 mm, next inspection (TÜV): 11/2025, fuel type: electric, maximum load weight: 227 kg, For sale scissor lift Skyjack Sjiii 3219, Batteries checked good. Working height - 7.80 m Lifting capacity - 227 kg Weight 1312 kg Lrodpfx Ahju Uplzo Ssu Powered by batteries 220V charging Control from the platform The lift has been checked and serviced without operation in Latvia.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted Lrodpfx Ask S Dt Teh Seu - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, controller manufacturer: Cybelec, controller model: DNC 1200, bending force (max.): 200 t, stroke length: 215 mm, number of axes: 6, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, upper tooling, Used high quality very accurate Edwards Pearson PR6 200/4100 6axis CNC Pressbrake for sale New / Year 2001 Model PR6 200/4100 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 200ton / 4100mm x 200ton Fully serviced Very late Pr machine before Bystronic pressbrakes Upper Euro Tool Clamps Complete with with: Cybelec CNC Control with Colour Graphics Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Ledpfx Ahjx Avbys Sjru Sick Infrared Lightguards Full set of Top and Bottom Tooling With crowning

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders -Manufacturer: Sick/Hausmann, Absolute Encoder -Type: ATM60-A4AO-K08 ID no. 1032969 Lrodpfsf Nrq Usx Ah Sju -Voltage: 10-32 VDC -Shaft: Ø 10 x 20 mm -Price: per piece -Number: 4 piece -Dimension box: 135/110/H90 mm -Weight: 0.4 kg/piece

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW Lrjdpfou Nfmyjx Ah Sou weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Ljdpfsyz Dr Tsx Ah Sjru Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Lsdpjhtm E Nefx Ah Seru Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Lsdoy H Ilbepfx Ah Seru Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Lredsy A Ifmjpfx Ah Sju Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec Lodpfx Ahjdyynvo Seru return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused -CE marking -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted. Lredpozivikjfx Ah Sou

Condition: used, Light barrier, safety light curtain -Protective field height: 1650 mm -Protection class: IP 65 -2x receiver photocell type: C40E-1603CA010 -Price: per piece -Dimensions: 1780/40/H50 mm Ljdpfeftpcmox Ah Seru -Weight: 7 kg

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm Ljdpfx Ahju Nfn Re Ssru ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm Ljdpfx Ahsyia Enj Sjru -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine for sale. Brand: Adast, model: MS80-M8. Size: 800 mm cutting width. This machine comes from an art academy, has not been used extensively, and has been serviced annually. The counter reads only 144,624. It is equipped with LED cutting line lighting and Sick safety protection. Features a large screen, programs, and air-table spare blades. Complete with all accessories and tools. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos. Lredpfozr Uyajx Ah Ssu

Condition: used, Max. Blechstärke: 1.25 mm steel Lrsdpfxehlnv He Ah Seu Roller center distance: 63 mm

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm Ljdsy D T S Iopfx Ah Seru distance between columns 2050 mm control CYBELEC ModEva 10 S dayligth 570 (EHT) mm total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm Lsdpfx Ahotqqq Rj Seru ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK