Used extruders & extrusion lines for sale (218)

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 MACHINE DETAILS Total power: 12.0 kW EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Degassing Dsdpfx Ajxx Uk Eofljcr Strand die Water bath by Collin Scheer granulator SGS 50-ET

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Dcodpex Agibjfx Aflsr Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW Dcsdsx Dkmgopfx Afljr • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Dedpoxx Tnpefx Aflecr Operating hours: 17,620 h Year of manufacture: 1999

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Stainless steel cooling tank Dodpfx Afexzfdbjlecr Sheer dryer Sheer granulator

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Dcedpfx Afjx Apcksler

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Djdsx Dip Tspfx Aflscr Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Dodjhy Tp Dopfx Aflocr Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones Dcjdpfxsu Hik De Afler - dosing - Control system

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: Dodpfx Afowqm Ddjlecr dr. wiesner Integra leak test system The classic - for all common test procedures The leak test system for industrial leak-tightness and flow tests with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Dodjxzlutepfx Aflscr Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Extrusion

Year of construction: 1993, operating hours: 2,466 h, condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466 Dcedpfeu Aqdkox Aflsr

Year of construction: 2017, condition: excellent (used), Category: Twin-screw extruder Number: DE27686 Manufacturer: Berstorff Dcsdpsx A Evajfx Aflsr Type: ZE 25 Year of manufacture: 2017 Capacity: 10 – 50 kg/h (depending on material) Screw diameter: 2 x Ø 25.1 mm L/D: 47:1 Motor: 14.5 kW Control: Siemens Details: Co-rotating, segmented screws and barrels, degassing, vacuum pump, 1x side feeder The laboratory extruder is in excellent condition and can be inspected at any time at our premises in Haan/Düsseldorf. Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry – we have suitable options for almost every budget in our portfolio.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER​ TWIN SCREWS EXTRUDER, for PP / PE / PET Direct Recycling Type: RZE 2-85-41: D, Corotating Unidirectional Machine No .: Year of construction 2007 With​ gear pump,​ dosing station​ with 5 components +​ working platform and​ 2 K-Tron, 2 screws feeder Application:​ for Recycling, Compound or Pinpe Production Screw speed: 280 U / p min 10 digital cylinder heaters with cooling Screws: segmental Screws Cylinder: Segment construction Heating power: 104 KW Drive Baumüller: 260 KW Throughput: approx. 900 kg / h Condition: very good Djdpfx Asxzr H Noflocr Vacuum pump is not included​ Price EXW 35.000,00 Euro Best Regards P. Sachal Location: D-26345 Bockhorn / Grabstede Sachal Extrusionsmaschinen Tel. =WhatsApp P. Sachal Sachal Extrusionsmaschinen

Condition: excellent (used), We are offering an unused single-screw extruder from stock. The unit was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory, material development, small batch production, or custom extrusion applications. Dodsxxim Iepfx Aflecr — Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / test runs only • Drive: 3 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Currently not connected, but can be integrated without issue • Die: Strand die can be customized or newly manufactured upon request • Design: robust laboratory/pilot plant construction • Mobile: base plate with heavy-duty castors – easy to position — Special Features • Very compact design • Ideal for filament, profiles, laboratory tests and material trials • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder grooved feed Djdpsua Ti Iofx Afljcr

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 1100 kg Measurements height 1960 mm Dimensions Machine Length 2120 mm Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Dsdpfxoxyl Svo Aflecr Extrusion

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Djdpexykcgsfx Aflscr Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Dcsdewqgitepfx Aflsr Germany

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding Dedpfx Afsxwvqqolecr • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 1993, condition: good (used), functionality: fully functional, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Dcedpfx Afjpy Eygolor Fully functional

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Dcsdpfx Aow Spt Nofler Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Dsdpfx Aoxu Dp Nsflecr

Year of construction: 2025, condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Dsdpfx Aeiv H Eksflocr We can also provide machines in other dimensions.

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Dcjdsiux Nmjpfx Aflor Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.