Used Simatic Multitouch Display for sale (8,854)

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Itedpfx Acjy D Sqvspjn Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Itodpfoy Hkd Hex Acpon Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, ESPEC Type: PL-3KPH ESPEC Climate Testing Chamber / Environmental Simulation Chamber Model PL-3KPH Air-cooled version For sale is a high-quality ESPEC climate testing chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows STOP / ready for operation. Technical data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): 600 × 850 × 800 mm External dimensions (W x H x D): 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Weight: approx. 350 kg Cooling: air-cooled (no external water connection required) Refrigerant: R404A Equipment / Features Touchscreen control panel Program and constant operation modes BTHC temperature and humidity control Observation window in the door Stainless steel test chamber Internal lighting / Chamber lamp Side cable entry Overheat protection Hour meter integrated Industrial design For your security as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Scope of delivery ESPEC Climate Testing Chamber PL-3KPH Scope of delivery as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading with a forklift can be organized. (Subject to changes, prior sale, and errors in the technical data!) Ijdpfxoy H H Iuj Acpjtn If you have any questions, please do not hesitate to contact us.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Isdpfezixy Sox Acpotn Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Itjdpszizmzefx Acpjn Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Ijdpfxszdiuks Acpetn Wrist Rotation (J6) 720 (−360 to +360) Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: used, Applied Type: Applied Biosystems ViiA7 Biosystems ViiA7 Specifications: Block change from the front of the instrument in less than 1 minute; no secondary tools required Supported applications: Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve Temperature uniformity: ±0.5 °C, within 30 seconds after reaching the target temperature Run time: ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes: 96-well standard (10–100-μl reactions) 96-well Fast (10–30 μl reactions) • 384-well (5–20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions) Detectable sensitivity: up to 1 copy • Excitation/detection wavelengths: 6 excitation (450–670 nm) 6 emission (500–720 nm) • Dynamic range: Up to 9 logs linear dynamic range Resolution: Detects only 1.5-fold changes in target quantities in a singleplex reaction 21 CFR p11 Enablement: Security, audit, and e-signature functions for instrument data Automation: Includes plate loading arm with barcode (distribution, service, and support provided by Life Technologies) Remote notification: Notifies the user via email when the run is started, stopped, or aborted Data export format: Fully configurable by the user Description: Applied Biosystems Real-time PCR ViiA7. Ideal for performing real-time PCR with medium to high throughput. Interchangeable blocks for 96-well, Fast 96-well, and 384-well plates, as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet connection. 2x USB connection. 1x RS 232 connection. 2x connection on the display. Weight: 67 kg Itsdpfxezd Ud No Acpon Condition: used Scope of supply: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, English Type: German RepRap X1000 RepRap 3D printer The X1000 is a 3D printer for processing a wide variety of plastic materials, with an extra-large printing area and an optional dual extruder. With a layer thickness of up to 0.1 mm and a printing area of 1000x800x600 mm, this 3D printer can be used to produce both large models and multiple small objects with precision. An enclosed control cabinet, an emergency stop switch and an optional CO2-based dual fire protection system meet the requirements for safe operation in an industrial environment. Technical data: Description Data Printing area (X - Y - Z) 1000 x 800 x 600 mm Printing speed 10 - 150 mm/s Travel speed 10 - 300 mm/s Layer thickness (minimum) 0.1 mm (nozzle dependent) Filament/nozzle diameter (standard) 1.75 mm / 0.8 mm Material PLA, Performance PLA, Laywood, PVA, PET-G, TPU64D Extruder type DD3 Dual Iedpfozd Td Uex Acpstn Extruder temperature (maximum) 290°C Data transfer LC touch display, wireless printing via WLAN, Ethernet Software Simplify3D software Power consumption 2500 W Operating voltage* Three-phase 400V (CEE 3L+N+PE) Ambient temperature 15-26° C External dimensions approx. (W x D x H) 1725 x 1500 x 1320 mm Weight approx. 400 kg Marking DIN 10218-2 Options Heated bed, dual extruder, dual CO2 fire protection system Available nozzles 0.4 / 0.6 mm Available nozzle material Brass, hardened steel Technology Fused Filament Fabrication (FFF) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: Itsdpfxsy Iyuwj Acpon The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Ijdpfx Asyiy Hbecpotn Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Itodpfezhadcex Acpon Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Iedpfx Aezh I Dwecpjtn Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Itodpfjzicwuex Acpjn Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: excellent (used), mileage: 13,881 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, CO₂ emissions: 249 g/km, fuel tank capacity: 93 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, number of seats: 3, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, fog lights, navigation system, power mirror, seat heater, sliding door, start-stop system, = Additional Options and Accessories = - 2-pedal control - 7-inch touchscreen - attention assist - outside temperature display - heated side mirrors - passenger airbag - lighting in the cargo area - hill start assist system - car kit - stability class 1 - DAB radio - third brake light - entry step in the rear bumper Itodpfxjyngfzj Acpon - EURO 6 - driver airbag - height-adjustable steering wheel - front center armrest - rain sensor - immobilizer - steering wheel shift paddles - thermal glass - blind spot assist - two rear doors - partition without window = Additional Information = General Information Number of doors: 5 Year of manufacture: 2024 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Transmission: 9G-Tronic, 9 gears, automatic Front axle: steered Weights Unladen weight: 2,130 kg Payload: 1,370 kg GVWR: 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Consumption Average fuel consumption: 9.5 l/100km Fuel consumption in urban areas: 10.9 l/100km Fuel consumption in extra-urban areas: 8.3 l/100km Maintenance, History and Condition APK (Technical Inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good Warranty Warranty: 12 months Additional Information Please contact Lorenz Schoutteet for further information.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 17,099 h, load capacity: 6,000 kg, lifting height: 7,500 mm, free lift: 2,350 mm, fuel type: electric, mast type: triplex, construction height: 3,500 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 12,972 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideloading Forklift Ijdpjwyyifjfx Acpotn Load Center: 800 Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Front Tires Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tires Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Year: 2020 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing options are always available on favorable terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EGX60/16/75TR. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle for commission sale at our facility. Fork Positioner, 1 x NIVO Fork; Fork Positioner Opening Range: 460 / 1,460 mm Cab Heater, Full Cabin, Full Free Lift, Platform Height: 1,050 mm

Condition: used, mileage: 126,000 km, power: 177 kW (240.65 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, Year of manufacture: 2021 Year of construction: 2021 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Empty weight: 6.740 kg Carrying capacity: 5.250 kg GVW: 11.990 kg Tail lift: Palfinger, tail lift, 1500 kg Registration number: 37-BXH-3 = Additional options and accessories = Ijdezzw D Tjpfx Acpotn - Comfort seat with heating - Coupling Rockinger - Lock diff - Outside temperature display - Radio - Roof spoiler - Suspension seat - Visor = Remarks = Palfinger taillift 1500 kg

Condition: good (used), mileage: 159,981 km, power: 81 kW (110.13 HP), first registration: 10/2016, fuel type: diesel, wheelbase: 3,680 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 3, total width: 2,070 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 1,900 kg, Equipment: ABS, Bluetooth, USB port, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, sliding door, soot filter, tire pressure monitoring, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Front work lights - Armrest - Audio controls on the steering wheel - Exterior mirrors with turn signal indicator - AUX input - Outside temperature display - Becker holder - Heated mirrors - Co-driver's seat - DAB radio - Tachometer - Third brake light - Power mirrors, heated - Driver airbag - Driver's seat height adjustment - Remote central locking - Tinted glass - Rear doors - Adjustable steering wheel - Height-adjustable front seats - Multifunction steering wheel - Rear parking sensors - Particulate filter - Radio/CD player - Rearview camera - Disc brakes Iodpfxsz Tlbpo Acpstn - Headlight leveling system - Immobilizer - Touchscreen - Partition without window = Additional Information = General Information Number of doors: 5 Year of construction: 2016 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1,650 kg Maximum rear axle load: 1,900 kg Weights Unladen weight: 1,902 kg Payload: 1,398 kg GVWR: 3,300 kg Condition Technical condition: good Optical condition: good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van or truck. The stated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, mileage: 150,000 km, power: 129 kW (175.39 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, total length: 7,950 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,100 kg, permissible axle load (axle 2): 5,680 kg, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, tachograph, tail-lift, General information Year of construction: 2020 Registration number: BB-923-N Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Axle configuration Suspension: leaf suspension Front axle: Max. axle load: 3100 kg; Tyre profile left: 90%; Tyre profile right: 90% Rear axle: Double wheels; Max. axle load: 5680 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25% Weights Empty weight: 4.210 kg Carrying capacity: 3.280 kg GVW: 7.490 kg Functional Tail lift: 1000 kg = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest Itodpfez Avrfex Acpen - Outside temperature display - Radio - Reversing camera - Suspension seat - Tined glass - Toolbox

Condition: used, mileage: 42,000 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: white, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, Number of doors: 4 Year of manufacture: 2023 Year of construction: 2023 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Alarmsysteem class 1 - Camera system - Electrically adjustable exterior mirrors - Electrically operated windows - Lane Assist - Outside temperature display - PTO - Rear air suspension - Reversing camera = Remarks = Itjdpfx Acezzxy Nepen 7-person version with the Insoli System. LIKE NEW.

Condition: used, mileage: 418,000 km, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, Year of manufacture: 2020 Year of construction: 2020 Front axle 1: Steering; Suspension: leaf suspension Iodszzp Ukjpfx Acpjtn Front axle 2: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Empty weight: 15.345 kg Carrying capacity: 19.655 kg GVW: 35.000 kg = Additional options and accessories = - Air horn - Camera system - Heavy duty engine brake - Lock diff - Outside temperature display - PTO - Radio - Refrigerator - Spotlights - Vehicle heater - Visor = Remarks = Velsycon-Combilift Type CL 3572 16.655 KG

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel, professionally refurbished and tested, 6-month warranty, 100% functional. Scope of delivery as shown in the photos. Itedpfxji Edchs Acpen

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel, professionally refurbished and tested, with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Iodpfoi Edctox Acpstn

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! Iodpfx Acez S Euaopetn TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: used, mileage: 87,000 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, loading space length: 3,100 mm, loading space width: 2,050 mm, loading space height: 300 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, Year of manufacture: 2017 Year of construction: 2017 Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 45%; Tyre profile right outer: 40% Empty weight: 3.495 kg Carrying capacity: 1.705 kg Isdpfx Ao Aayfuscpotn GVW: 5.200 kg = Additional options and accessories = - Airbag - Camera system - Flashing lights - Outside temperature display - PTO - Radio/CD player - Reversing camera

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Working width: 2235 mm Iedpfouxu Eqsx Acpetn Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL