Used Turbo M100P for sale (633)

Condition: ready for operation (used), functionality: limited functionality, power: 74 kW (100.61 HP), fuel type: diesel, empty load weight: 6,450 kg, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2004, Equipment: additional headlights, all wheel drive, cabin, standard shovel, trailer coupling, Telescopic Loader MANITOU MLT 630 Turbo Year of manufacture: 2004 Operating hours are unknown as the counter is non-functional! 101 HP Perkins engine 4-speed powershift transmission 3-ton lifting capacity 6-meter lifting height - NEW BUCKET - mechanical quick coupler - auxiliary hydraulic circuit up to the fork carriage - all-wheel drive - 3 steering modes - joystick control - cab with heating - lighting system with indicators - ready for immediate use! - original paint! - good tires! - incl. CE certification - incl. Belgium road registration Lrjdeyf Abyjpfx Ac Aon Sale price: €23,500 net, incl. new bucket as shown in the photos! Pallet forks or light material bucket available at additional cost! Affordable delivery possible!

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Ledey D D Rhopfx Ac Aorn Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, functionality: fully functional, Turbo molecular pump nEXT85iD CF63 Edwards Lsdpfx Aow I Snhec Aorn

Condition: new, Year of construction: 2026, functionality: fully functional, BRAND-NEW, Fully functional Edwards T-Station 300 for sale in factory packaging, with a 1-year warranty. Lrodpfx Acoyrr N He Aen Worldwide shipping available - request a quote! If you are looking for a vacuum pump, accessories or any vacuum technology related equipment, please contact us. We are happy to help you with purchasing, technical advice or developing custom solutions.

Condition: excellent (used), functionality: fully functional, maximum load weight: 3,500 kg, lifting height: 14,000 mm, Year of construction: 2007, operating hours: 5,700 h, TELEHANDLER Manitou MT 1435 HSL Turbo Year 2007 Lifting height 14 meters Capacity 3.500 kg Lredpfx Aceyy R Npo Ajn Working hours 5700 Diesel engine Forks Regular documentation

Condition: new, Year of construction: 2025, Turbo mill MTR-800 The turbo mill is designed for grinding, knocking out, granulating of materials in order to improve the quality of final separation in further recycling processes. Technical date: - Installed power –75kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. - Number of abrasive counterknives – 18 pcs. - Structure placed on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening by means of a manual hydraulic pump - Engine base with a rocker tensioner Lodpfev I S Uksx Ac Asrn - Weight – approx. 1950kg- -Discharge ended with an orifice fi-150 -Electrical installation with inverter included in the price.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Rühle SR 2 Turbo Dicer / Cubing Machine Ledox E Du Nspfx Ac Aern

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production Lodpfsyu Up Isx Ac Ajrn - Compact and robust design - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. Ledpsxx R S Ejfx Ac Aern - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Lrjdpfxsxx Sawj Ac Aon Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: V001175, Weinig GRECON TURBO S finger jointing line with integrated Timme stacking machine - German production - year of manufacture 2015 TECHNICAL PARAMETERS: Wood parameters - width 40 - 150 mm Lodpfjyrccdjx Ac Asrn - thickness 20 - 80 mm - length 150 - 1000 mm - pressing length 3000 - 6100 mm - power consumption 145 kW - air consumption 4300 Nl/min - suction capacity 12088 m3/h - two milling stations - undercutters - package width 600 mm Folded machine dimensions - length 30000 mm - width 7000mm - height 2100 mm - required floor length: approx. 31000 mm - required width: approx. 8000 mm

Condition: like new (used), functionality: fully functional, The Manzini TE30 Single Turbo Passer is an industrial machine designed for processing fruits and vegetables, especially in the food industry. Its main function is the separation of pulp and seeds through a centrifugal refining system, enabling the production of purees, sauces, and concentrates with a homogeneous texture and free from impurities. Features: - Refining System: Utilizes a high-speed rotor that propels the product through interchangeable sieves, allowing the final texture to be adjusted according to specific requirements. - Versatility: Suitable for a wide variety of products, including tomatoes, stone fruits, berries, and other vegetables, adapting to various production processes. - Efficiency: Engineered for continuous operation, ensuring high output with minimal maintenance. - Hygiene: Made entirely of stainless steel with an accessible design for easy cleaning and to meet food hygiene regulations. Ljdpfxewxw A To Ac Asrn - Output may vary depending on the processed product.

Condition: like new (used), * Production may vary depending on the product. Lodpfjx S Irfjx Ac Asrn

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement Lodpjnfvmhefx Ac Aern • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: new, Year of construction: 2025, The TRM Series Turbo Mills is an advanced grinding system used primarily in the recycling of electronic boards and cables for the effective crushing and grinding of these materials. Plastics, metals, and other components found in electronic boards and cables are reduced to fine particles and transformed into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process, reducing materials to micron sizes through friction and impact forces. ✅ Superior Grinding Performance – Friction & impact forces ensure ultra-fine particle sizes. ✅ High-Speed Rotors – Maximum efficiency in material reduction. ✅ Durable & High-Efficiency – Designed for continuous, long-term operation. ✅ Eco-Friendly & Sustainable – Ideal for electronic waste recycling. 🔸 Choose the Right Model for Your Needs! Technical Specifications 🔹 TRM S1 Power: 15 kW Rotor Diameter: 380 mm Length: 1420 mm Width: 700 mm Height: 700 mm Weight: 660 kg 🔹 TRM M1 Power: 30 kW Rotor Diameter: 500 mm Length: 1680 mm Width: 820 mm Height: 920 mm Weight: 870 kg 🔹 TRM L1 Power: 45 kW Rotor Diameter: 620 mm Length: 1790 mm Width: 940 mm Height: 1040 mm Weight: 1000 kg Lredpfx Acsv Hm S Io Aen

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Ljdpfx Asn E N E Ejc Aern Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; Ledpfevtn Hmjx Ac Ajrn - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: used, axle configuration: 3 axles, first registration: 01/2009, suspension: air, tire size: 385/55 R22.5, color: other, Year of construction: 2009, Axle configuration Lsdpfx Acozgm Tue Aern Tyre size: 385/55 R22.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Tyre tread left: 13 mm; Tyre tread right: 14 mm; Brakes: Drum brakes Rear axle 2: Tyre tread left: 11 mm; Tyre tread right: 10 mm; Brakes: Disc brakes Rear axle 3: Tyre tread left: 14 mm; Tyre tread right: 15 mm; Brakes: Drum brakes Weights Unladen weight: 4,160 kg Payload: 34,840 kg Gross vehicle weight (GVW): 39,000 kg Condition Damages: none

Condition: used, axle configuration: 3 axles, first registration: 03/2007, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Axle configuration Tyre size: 385/65 R22.5 Lredpfxezgm S Rs Ac Ajn Axle brand: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle; tyre tread left: 6 mm; tyre tread right: 6 mm Rear axle 2: tyre tread left: 10 mm; tyre tread right: 6 mm Rear axle 3: tyre tread left: 6 mm; tyre tread right: 6 mm Weights Unladen weight: 6,850 kg Payload: 32,150 kg Gross vehicle weight (GVW): 39,000 kg Condition Damages: none

Condition: used, axle configuration: 3 axles, first registration: 03/2007, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: air suspension Rear axle 1: Tyre tread left: 5 mm; Brakes: disc brakes Lrsdpezglihefx Ac Aen Rear axle 2: Tyre tread left: 16 mm; Tyre tread right: 11 mm; Brakes: drum brakes Rear axle 3: Tyre tread left: 11 mm; Tyre tread right: 6 mm; Brakes: drum brakes Weights Unladen weight: 5,480 kg Payload: 33,520 kg Gross vehicle weight: 39,000 kg Condition Damages: none

Condition: used, axle configuration: 3 axles, first registration: 01/2009, suspension: air, tire size: 385/55 R22.5, color: other, Year of construction: 2009, Axle configuration Tyre size: 385/55 R22.5 Axle brand: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre tread left: 14 mm; right: 14 mm Rear axle 2: Tyre tread left: 12 mm; right: 12 mm Rear axle 3: Tyre tread left: 14 mm; right: 13 mm Lrodpfszglibsx Ac Aen Weights Unladen weight: 4,160 kg Payload: 34,840 kg Gross vehicle weight: 39,000 kg Condition Damages: none

Condition: used, axle configuration: 3 axles, first registration: 08/2003, color: other, Year of construction: 2003, Axle 1: left 7 mm right 7 mm Axle 2: left 10 mm right 15 mm Axle 3: left 12 mm right 11 mm We have the possibility to stack trailers!  Lrjdpsv Ib Dnofx Ac Asn

Year of construction: 2012, condition: used, Twin Chamber Vacuum Packer Make: Turbovac Model: SB620 Built 2012 Lredpfx Acoy T Ibpj Aon 2 units available for sale

Year of construction: 2015, condition: like new (used), Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph Lsdpfjlt T Trex Ac Aorn

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2009, total length: 10,200 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2009, Equipment: ABS, = Other options and accessories = - Air suspension = Notes = TRANSPORT TO ANTWERP €590 = Further information = Lredpsx A Ihxsfx Ac Asn Tyre size: 385/65 R22.5 Axle brand: SAF Suspension: Air suspension Unladen weight: 8,840 kg Number of compartments: 7 Technical condition: very good Visual condition: very good