Used Ump Technika Hydraulic Press for sale (28,582)

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm Ijdech Dacjpfx Am Dsbc MARCELS MASCHINEN CH

Condition: new, Year of construction: 2025, A high volume shredder for long pieces of material. Boards and cuts are fed into the machine via a horizontal vibratory conveyor and multiple feeding rotors. The high speed shredder makes quick work of extra long pieces when shredding them against replaceable blades, blade holders, sieves and counterblades. Allows to shred pieces up to 170mm height, 510mm width. Material is extracted with an included main auger to the side/rear of the machine. Includes electrical cabinet with full load monitoring. Material is suitable to sell as chips, or further processed with a hammer mill. Specifications: Throughput: Up to 13m3/h, ~2225kg/h* Main motor: 37/45kW Speed: ~500RPM Blades: 38 units. Blade size: 40x40 for softwood, 35x35 for hardwoods. Length: 2100mm Width: 1550mm Height: 1350mm Weight: 3500kg Screen: D20 / 35x35 Ijdetnfrlspfx Am Djbc Warranty: 2 years / 1 000 workhours

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm Ibedpfsyfwxtsx Am Djc ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with Ibodpfx Ajyfwywjm Djc - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK Ibodpjtqqq Rofx Am Doc

Condition: used, Year of construction: 1987, Press force: 315 t Stroke: 750 mm Frame width: 1700 mm Side frame opening: 1100 mm Shut height (stroke up): 1250 mm Table area: 1600 x 1300 mm Cushion force in table: 125 t Ijdpfx Amozynk Ie Dsbc Cushion stroke in table: 350 mm Cushion area in table: 1000 x 900 mm Table height above floor: 750 mm

Condition: used, functionality: fully functional, COLMAL hydraulic press brake 3000x250 ton, 4 axes, throat 300 mm. Dimensions: 380x350x180 (H) cm, weight 14,100 kg. Ibedpswyng Sefx Am Dec

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: Ibsdpfxotmup Uo Am Doc The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: used, Year of construction: 1987, Pressing force: 65 t Stroke: 1100 mm Frame width: 930 mm Ijdpfx Amozyl Dfe Debc Side frame opening: 705 mm

Condition: new, pressure 200 t stroke 400 mm Ijdpfxjfm T Hgj Am Djbc daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l liter capacity 22 l feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 1,1 x 2,6 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: used, Technical details: Ibjdpfovc Ax Nox Am Djc pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Ijdpfx Amezypmwe Dsbc Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Upstroke speed: 30 - 450 mm/s

Condition: new, pressing force: 135 t, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 940 mm, overall weight: 7,750 kg, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Isdexfzpzspfx Am Dsbc Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: excellent (used), Year of construction: 2004, SCHULER HYDRAP Year of manufacture: 2004 Ibodpfx Amjz Ei A Ts Dsc Press force: 10,000 kN Stroke length max.: 1,650 mm Installation height: 2,400 mm Closing speed: 420 mm/s Working speed max.: 68 mm/s Working speed at rated force: 21 mm/s Tool base area max.: 3,900 x 2,400 mm Tool base area min.: 1,800 x 1,200 mm Tool installation height: 750 mm Tool weight max.: 50,000 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm Ibjdpfx Amjzzzi Hj Dsc - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm Ibjdpexna Uzofx Am Dsc max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW Ijdpjw Smukofx Am Debc weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m Ibodpfx Aju Nfq Eom Dsc HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: new, pressure 150 t Ibodpfx Aoxabnasm Dec stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW Ibsdpjxaar Defx Am Djc weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Iedpfoxaayhox Am Dobc Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display Isdpfx Aexaakgjm Djbc - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Side frame opening: 700 mm Iedpfozyl Haex Am Dobc Shut height (stroke up): 800 mm Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Cushion area in table: 700 x 400 mm Table height above floor: 960 mm

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l Ijdpfxsxabcwe Am Debc engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm Ibedpfx Asu N A Easm Dsc daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *