Used Wendel Tool Holder for sale (39,401)

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Nlodpfjzdizvox Akcsd Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: ready for operation (used), 12 kW, 140 degrees Celsius. Three units in stock. Njdpfx Ajzab S Hekceld Warranty: 6 months.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Nledpfecw Dg Djx Akcsd Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Njdey Uddpspfx Akcold Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: Nodpfxjx Emfkj Akcjld 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Nljdoy Uddcspfx Akced Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Nlsdpfex Emd Tex Akcsd Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), fuel type: diesel, Year of construction: 2019, operating hours: 840 h, Equipment: all wheel drive, car registration, soot filter, HOLDER C65 SC Municipal utility vehicle with mowing equipment Accessories: 1. WICKE FSML-165 mower with a maximum cutting width of 165 cm 2. STOLL Type 3000 container with a volume of approximately 1500 liters This HOLDER C65SC utility vehicle was first put into operation in 2019 and has only 840 operating hours according to the meter. It is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. - Net price: €41,932 // Gross price: €49,900 - Inspection / test drive is possible at any time - Shipping can be arranged nationwide; costs depend on the distance! Nodpfx Aezcv Syskcjld - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Nlsdpey Suavsfx Akced

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Nsdpoy St Urofx Akcold

Condition: used, diameter div. number 36x Nodpfx Akjww Nb Esceld tool adaptor BT 40

Condition: used, diameter div. number 40x Nledpfsww Nbxjx Akcjd tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Nlsdpfx Akoww Nbfscjd

Condition: used, diameter div. number 56x Njdpfxewtrzyo Akcjld tool adaptor BT 40

Condition: used, diameter div. number 16x tool adaptor SK 50 Nlsdpfxjwtrztj Akcsd Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, diameter div. number 36x tool adaptor SK 40 Nlsdpfx Akswtrzgeced

Condition: good (used), Different toolholders in very good condition. Nledpfxey Txiqj Akced

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​ Nledpfx Ajxv A Nqjkcjd

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Nedpfx Aev E Uirjkceld

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 Nsdpfoxni Iqsx Akcold 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Nljdpfx Aksxnizdjcod Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Nsdeyzt Nzspfx Akceld Price is for the entire unit.

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders Nodpfjwg Rv Nex Akcsld 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Nedpfx Akewu Adbscsld Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Nljdpfxjvictms Akcod