Used Withworth Taps for sale (1,002)

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours. Kdodpfx Asznh R Rocpeu

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most Kdodpfxez D H D Ee Acpou carbon-efficient way to equip a modern laboratory.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Kdodpoz Icz Iofx Acpju Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling Kdsdpoz Hmpajfx Acpeu LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm Kdodpfx Aez Dtxcocpeu - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Kedpsz Dt Uksfx Acpedu Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: excellent (used), mileage: 443,951 km, first registration: 03/2017, tire condition: 50 %, axle configuration: 8x4, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, crane, = Additional options and accessories = - Beacon(s) - Hub Reduction - Power take-off (PTO) - PTO - Sun visor = Remarks = Superstructure Year of manufacture: 2016 Crane Remote control: × Rotator: ✓ Clamshell bucket: ✓ Beautiful DAF CF85/510 configured as a Z-crane hook truck, This one is ideal for the recycling industry! In addition to the options already mentioned, it features: -8x4 -Air conditioning -Navi -catching mouth -Extra hydraulics for trailer or environmental container -Rear camera -Palfinger hook 22 tons -Palfinger Epsilon tap -260Z96 (26 tons and 9.60 extendable etc etc This one is ready for immediate use! = More information = Axle configuration Tyre profile: 50% Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 17.825 kg Functional Crane: Palfinger EPSILON 260Z96, year of manufacture 2016, behind the cab Make of bodywork: Palfinger Extendable superstructure: Yes Tipper: Back Kdodpszvzp Nsfx Acpeu Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Orange juicer with automatic fruit feed This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh juice in kitchens, hotels, canteens or small-scale production. The juicer sits on a stainless steel base cabinet on castors. We have not been able to confirm the exact model or the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. Kdjdpfx Acsz Ndcvepeu More photos and full specifications: / Type: Automatic citrus juicer Feed: Fruit basket on top Controls: Display with on/stop/select buttons Construction: On stainless steel cabinet with castors and peel bins

Condition: good (used), Year of construction: 2011, functionality: fully functional, Mitsubishi controller, tapping spindle, loading magazine. Kdedpfxoz Ryz Ee Acpou

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 145 mm, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 0, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: ISO40, spindle diameter: 72 mm, nominal power: 3 kW (4.08 HP), Milling-/Drilling Machine, DRO, drilling capacity Ø 40 mm, motor 2,2/3,0 KW, table size 800x225 mm, spindle speed 32-3240 rpm stepless, ISO40, pneum. tollclamping el. tapping device, table stroke X/Y 585/240 mm, automatic spindle feed, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Kjdjz Rqfzopfx Acpjdu

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction Kodpfsiphu Iex Acpsdu INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm Kodpfxsq U Swgs Acpedu - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: used, Year of construction: 2005, CNC Mitsubishi Mieldas 635 LC Max. machining diameter Ø 32 mm (from Ø 10 mm) Max. machining length 320 mm for the chuck Max. front drilling diameter Ø 12 mm Max. front tapping diameter M 10, tap M 8 (die) Through-hole diameter of the spindle Ø36 mm Main spindle speed from 200 to 8,000 min¯¹ Main spindle speed change Continuous S + 4-digit numerical value Main spindle indexing 1° Main spindle C-axis 0.001° Max. diameter of the chuck Ø 32 mm of the rear spindle Max. workpiece length for pick-up 145 mm from the rear spindle Max. workpiece overhang length 25 mm of the rear spindle Max. drilling diameter in the Ø 10 mm rear machining process Max. tapping diameter in the M8 rear machining process Rear spindle speed from 200 to 7,000 min¯¹ Rear spindle speed change Continuous S + 4-digit numerical value Rear spindle indexing 1° Counter-spindle C-axis 0.001° Tool holder spindle Max. tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min¯¹ Continuous S + 4-digit numerical value Opposite tool holder Max. drilling diameter Ø 7 mm Max. tapping diameter M 6 Spindle speed from 200 to 4,500 min¯¹ Spindle speed change Continuous S + 4-digit numerical value Guide sleeve and chuck models Main spindle chuck MC081-M Guide sleeve FG531-M Rego type ER16/AR16 chuck Rear spindle chuck FC081-M-K Number of tools to be mounted Up to 18 tools + α Tool dimensions Tool (multiple tool holder) 16 x 169 x 130 mm Sleeve (opposite tool holder) Ø 25.4 mm Maximum diameter of the tool mounted in the rotating tool holder of the tool holder Drill and front milling cutter Ø 10 mm Rapid feed rate 20 m/min Minimum increment of movement X1 axis 0.001 mm Y1 axis 0.001 mm Z1 axis 0.001 mm X2 axis 0.001 mm Z2 axis 0.001 mm Z3 axis 0.001 mm Kdedpfx Acey Uvy Ajpou Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Bar length 2,500 mm Center height 1,132 mm IEMCA BOSS 332-E BAR FEEDER INCLUDED Machine complete with manuals and CE declaration of conformity. All technical data shown are indicative and may be subject to change without notice, and therefore should not be considered binding.

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Kedpfx Aju Idmvecpedu Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Kedpfxjz R Szlo Acpodu Spindle speed: max. 8,000 rpm Number of stations: 10 + α Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Kjdpfez R Ri Iox Acpjdu Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free   - 780 punching strokes per minute - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg Ksdpfszwc Sbox Acpodu - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kjdpfx Acoz R Dt Ejpodu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, This is the latest generation iVario Pro 2-S from the premium manufacturer Rational. The iVario Pro 2-S is offered including the base frame shown in the picture. The multifunctional pan has been fully overhauled in our in-house workshop and the unit is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The iVario Pro 2-S is available from week 45. These are sample images; original images will follow shortly. The list price for this unit including the base frame is: €19,140 net / €22,776 gross. Our offer price is €8,815.12 net = €10,490 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician throughout Germany. Kedpfx Acoz Tfcgopjdu Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 1100 x 938 x 485 mm (1080 mm with base frame) Power connection: V: 400 / kW: 20.5 / Hz: 50 Serial number: E11VK20118050776 Year of manufacture: 2020 Weight: 134 kg Capacity: 2 x 25 liters Servings per batch: 50-100 Condition: used, fully overhauled, fully functional Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and dessert dishes, soups and sauces, or the 5 cooking processes: boiling, frying, deep-frying, braising and finishing. iZoneControl: flexible division of the pan base into zones with different temperatures. Low-temperature cooking: (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result for the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless Kdodpfx Acjyrtzkspou > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: new, Approx. 34.56 linear meters of META tire racks, tire racks, wheel racks, workshop racks, storage racks, available immediately from stock Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 34.56 linear meters Shelf offer 34.56 linear meters (30 bays) consisting of: Kjdpfxez Tlmle Acpsdu - 031 x uprights approx. 200 x 40 cm, disassembled (including 2 x feet and 2 x cover caps). - 180 x crossbeams approx. 115 cm. - 360 x self-tapping screws 4.8 x 13. - Manufacturer: META. - Load capacity: 150 kg per bay, evenly distributed. - Levels: 3 x storage levels. - Finish: Sendzimir galvanized. - New, ex-stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of €2 net per piece. -- MULTIPLE ITEMS AVAILABLE IMMEDIATELY-- Price: €2057.00 net plus applicable VAT. You will receive a VAT invoice. Transport: Delivery is available upon request via our partner shipping company; costs depend on your zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to help you realize your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, A used, well-maintained, CNC-controlled drilling and tapping machine with a moving column, equipped for drilling, countersinking, and thread cutting, featuring: - 7-position tool changer - Micro-spray system - Internal coolant supply - Automatic tool length measurement - 5 pneumatic clamping cylinders Kjdpfxoz S Rfdo Acpsdu - Documentation - Programming guide Drilling capacity in steel ST60: up to a diameter of 40 mm without pre-drilling Thread cutting in ST60: up to M30 Spindle speeds: 50-1500, freely programmable Tool holder: BT40 Travel distances X/Y/Z: 6000/650/400 mm Feeds: 0.01 to 1.5 mm/rev Rapid traverse speed in X/Y/Z: 18/8/5 m/min Technical data and dimensions subject to change.

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm Kedoz I T Rtepfx Acpodu number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg Kedpfxozgu Aqe Acpodu tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Kdsdpjx Db D Ajfx Acpju Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.