Used Żefam Dszb-50 for sale (32,957)

Condition: good (used), Plastic pipe, polyamide pipe -Plastic pipe: 50 pieces -Length: 1695 mm Pjdoy S S Udopfx Apvopt -Outer diameter: 96 mm -Inner diameter: 76 mm -Weight: 4 kg/piece -Submission/Price: complete -Transport dimensions: 1700/1056/H600 mm -Total weight: 200 kg

Condition: used, Year of construction: 2011, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW Ppodpewvl Apefx Apvet tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center for spare parts electric false - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center for spare parts Electric false - chipconveyor - external handwheel Pedpfx Apewvl Aiovjpt - Dual tool change arm - internal coolant - filter - Oil dust collector

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Pjdpfxemx Sl Ts Apvjpt

Condition: good (used), Year of construction: 2017, operating hours: 6,992 h, load capacity: 5,000 kg, lifting height: 4,630 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, mileage: 6,992 km, Electric triplex forklift Brand Still (Germany) Year of manufacture 2017 Capacity 5,000 kg Lifting height 4,630 mm Clearance height 2,350 mm Equipped with: FREELIFT Equipped with SIDESHIFT 6,992 operating hours Battery from 2023 with external charger Automatic filling system Video to follow Podpjyucwasfx Apvopt

Condition: good (used), Year of construction: 2017, operating hours: 5,558 h, load capacity: 5,000 kg, lifting height: 4,030 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, mileage: 5,558 km, Electric three-wheel forklift Brand: Still (Germany) Year of manufacture: 2017 Capacity: 5,000 kg Lifting height: 4,030 mm Mast height (lowered): 2,250 mm Features: FREELIFT Equipped with SIDESHIFT and FORK SPREADER 5,558 hours Fork length: 2,200 mm Podpfxjylb Tbj Apvopt Battery: 2022 With external charger Watch the video on YouTube.

Condition: good (used), Year of construction: 2019, operating hours: 3,276 h, load capacity: 5,000 kg, lifting height: 5,380 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, empty load weight: 7,700 kg, mileage: 3,276 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2019 Capacity: 5,000 kg Lifting height: 5,380 mm Overall height: 2,600 mm Equipped with: FREELIFT and SIDESHIFT ONLY 3,276 hours NON MARKING tyres Battery from 2019 with external charger Pedpfx Ajx Hyuzjpvept

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier Pedevmpgnjpfx Apvopt -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm Ppsdslxulcopfx Apvst -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Condition: like new (used), Nilma salad spinner in as new condition. 5-8 kg per cycle with a 1-2 minute cycle time Ppjdpfoy Hqanox Apvet

Condition: used, Year of construction: 2008, weight max. in kg / kg dimensions / mm weight / kg Technical data Manufacturer BÜTER Hebetechnik Type: HA 05-50 Year of construction: 2008 Load capacity 500 kg Own weight 3700 kg Ppsdpjtmyq Hefx Apvjt Lifting height 4842 mm Overall height 1222 mm Platform size 3000 mm x 700 mm Lifting time approx. 30 sec Lowering time approx. 30 sec Perm. ambient temperature -10°C - +40 ºC Motor supply: 400 V, 50 Hz Rated current: IN = 10 A + 4.5A Connected load 4.0 + 1.5 kW Control voltage 24 V IP protection class IP54 Operating pressure Lifting platform 182 bar Dbv setting 218 bar Pump capacity 12 l/min Operating pressure lifting/lowering chassis 36 bar Dbv setting 50 bar Pump capacity 3.1 l/min Oil type HLP 32 User manual available! TÜV until 07/2024

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA38-G2, General information Field of application: Construction Weights Empty weight: 13.910 kg Functional Generator capacity: 1.100 kVA Dimensions of cargo space: 606 x 245 x 290 cm Other information Fuel consumption: 128 Liter per Hour at 75% Load at 50Hz Generator: Stamford S6L1D-E41 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1200 l Production country: CN Ppedpsy T Uwqjfx Apvet Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Switchable 50Hz and 60Hz Standby power: 1125kVA at 60Hz, 1000kVA at 50Hz

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 07/2027, working width: 700 mm, conveyor belt width: 700 mm, type of input current: three-phase, TOP Pastry Twisting Machine, Universum HWM 50/70, New for all types of dough, such as corn twists, pretzels, and lye sticks, etc. Pedpfx Apsy U Tvzjvept Universal combination twisting machine for all types of dough for twisting and producing long rolls robust technology Pastry twisting machine with long roller at the bottom DGUV V3 certified – available only from us Connection: 400V, 16A CEE plug Used machine, refurbished & SAB inspected with warranty + spare parts service

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Ppodpfx Apey Urpyovst Made in Germany Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced Ppodpfxoy R Npis Apvet All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Pedpfx Asy R Npcjpvjpt Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), power: 88 kW (119.65 HP), fuel type: diesel, fuel tank capacity: 78 l, color: other, Year of construction: 2017, operating hours: 1,820 h, Year of manufacture: 2017 Empty weight: 6.115 kg Carrying capacity: 3.700 kg GVW: 9.815 kg Dimensions (LxBxH): 466 x 200 x 272 cm Engine type: Yanmar 4TNV94CHT-NTBC CE mark: yes Technical condition: very good Visual appearance: good = Additional options and accessories = - Blower - Radio - Rubber tracks Ppjdpfx Asy Ub Raspvot - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Japan

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz Podpfey Uvp Rex Apvspt • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal Ppsdpfx Apsxmag Uovot DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors Ppodpfjx Urn Aox Apvjt - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm Psdpfxsym D Ahe Apvopt - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Pjdpfx Apsy R Akmjvjpt

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Pedpfx Aey R Admepvspt

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Pjdpfx Apjyz R Hdovjpt Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, total width: 690 mm, total length: 640 mm, total height: 1,410 mm, empty load weight: 258 kg, input frequency: 50 Hz, year of last overhaul: 2026, overall weight: 258 kg, electrical fuse: 16 A, power: 4 kW (5.44 HP), Planetary mixer Fomko P 50 L Power adjustment Mixer with the following tools: 1 mixing beater, 1 dough hook 1 50-liter stainless steel mixing bowl DGUV V3 tested – available only from us Connection: 400V, 16A CEE plug Dimensions: 690 x 640 x 1410 mm (W x D x H) Used machine, refurbished & SAB tested With warranty + spare parts service Optional: Maintenance contract Ppodpfx Apevdkq Ajvjt Service package Delivery service More mixers in stock!