Used trimming saws for sale (54)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 7,198 h, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length Dksdpfx Anoyub Iqozor 18.5kWh saw engine

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Dkodpfot E Nw Tjx Anzjr Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 310 mm, saw blade diameter: 350 mm, height adjustment type: electric, total length: 2,500 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 8,500 kg, table height: 810 mm, cutting length (max.): 8,000 mm, feed rate X-axis: 40 m/min, power of feed motor: 4,000 W, saw drive: 15,000 W, equipped with 2 shafts (upper and lower) for a maximum cutting thickness of 200 mm Dkodpfx Answy Hzuezsr 2 motors of 75 KW each cutting width: 310 mm

Condition: used, Double-seam folder, 750 mm width. Dsdpfxszpyc Ij Anzekr

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg Dkedpfx Anezf Ixpszsr ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Djdpfxeucnuks Anzokr Total connection 39kW

Condition: used, Year of construction: 2006, machine/vehicle number: -, functionality: fully functional, input current: 40 A, type of input current: AC, cutting height (max.): 140 mm, saw blade diameter: 450 mm, saw blade bore: 80 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 1,500 kg, drive type: 3 x 4 KW Motoren, operating pressure: 6 bar, compressed air connection: 6 bar, feed length X-axis: 800 mm, feed length Y-axis: 5,000 mm, main saw diameter: 450 mm, pressure: 6 bar, Equipment: saw blade guard, We are offering this used JRIMAC multi-blade saw, 2-blade version, manufactured in 2006, for sale. Dkjdpfx Anozd Hcdozer Machine type: Machine no.: 0060401 Rated voltage: 3/N/PE/400/230 V - 50 Hz Rated current: 40 A Power consumption: 20 kW Minimum tool diameter: 450 mm Operating pressure: 6 bar Year of manufacture: 2006 Weight: 1500 kg Length: 6500 mm Width: 1800 mm Table height: 900 mm Overall height: 2100 mm Cutting length: 5100 mm, electrically adjustable Cutting height: 140 mm, 3x Cutting depth: 800 mm, 3x If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Djdpfszqrrqox Anzjkr Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Dksdpfxszqq R Sj Anzer

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Dodpfszqqn Djx Anzskr

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied available at the location in working condition Dksdpfozq Rh Dex Anzsr

Condition: excellent (used), Storti RM 500 edger Dkedpfxjk Talpj Anzsr - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Dksdpsirmulefx Anzer

Condition: used, Esterer DKV -160mm cutting height -with 2 mobile saws and 1 fixed saw -lath bush Djdpfxjwtclie Anzokr -splinter separator

Condition: good (used), Year of construction: 1987, older but functional panel saw with a cutting length of 5.1 m max. cutting width: 0.4 m max. cutting height: 140 mm overall length: 6.35 m Dkjdpfx Anjzl Hddozsr overall width: 1.2 m

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm Dksdpfx Anjvdcc Rozer min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Year of construction: 2024, condition: new, - 160 mm cutting height - 750 mm cutting width - 5-50 (100) m/min steppless feed - 37-110 KW sawing motor Djdpfx Aobrq Ndsnzekr - 75mm spindle diameter - 2 movable saw bushes

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Dedpezl N Tnefx Anzokr Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Djdpezcdn Nefx Anzskr Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Dkedpfxouprqwj Anzjr Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted - Used saw, very good condition Djdpfxjzddz Ss Anzskr Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, overall weight: 2,500 kg, cutting length (max.): 6,200 mm, We sell: JRIMAC rip saw STANDARD - NEW - Dkodjdndvkepfx Anzjr - Cutting length: 6,200 mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy: +/- 0.5 mm - Clamping device with an extremely robust blade guard and dust extraction connection - PLC machine control - Stepless, frequency-controlled, high-performance feed motor - Comfortable semi-automatic saw blade height adjustment - Stepless width adjustment of the fence - "JRIMAC" quick-clamping system for saw blades - Front table extension made of plastic or solid wood - Forced-guided splitter - Lower standard dust extraction channel pre-installed and ready for connection - CE-compliant, dust-tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 3,000 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 2,800 kg, cutting length (max.): 11,200 mm, We sell: JRIMAC rip saw/multifunction saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left - right/ right - left - Flexible and efficient working - Air cushion table for comfortable processing of panels - 90° stop ruler for cross-cuts - Clamping jaws for optimum processing of sheet material - Forced-guided pneumatic hold-down device with zero cut device - Various options for triggering the cut - Convenient, fully automatic saw blade height adjustment Dkjdpfsrdh Tkex Anzor - Stepless adjustment of the width stop - Electronic positioning control - Saw blade quick clamping system "JRIMAC" - High work safety - User-friendly - Cutting accuracy +/- 0.5 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, saw blade diameter: 600 mm, working height: 900 mm, We are selling 1 x CrossCut600. Cutting dimensions: 50x765 - 140x605 - 180x340 - 200x200 mm Maximum cutting height: 200 mm Saw blade: Ø 600 mm Working height: 850 mm Dust extraction port: bottom Ø 120 mm, top Ø 100 mm Dksdjfl Imaepfx Anzor - Infinitely adjustable, pneumatic feed system - Hydraulic brake cylinder for consistent feed speed - Pneumatically controlled workpiece clamping device - Cutting initiation via 2-hand control, with safety guard - Roller conveyors and stop systems available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 260 mm, saw blade diameter: 800 mm, working height: 880 mm, We are selling 1 x CrossCut 1.000 Cutting dimensions: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Maximum cutting height: 260mm Saw blade: Ø 700mm Working height: 880mm Dust extraction port at the bottom and top: Ø 120mm Dedpfx Aorfudrenzskr - Infinitely adjustable, pneumatic cutting feed - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - Cutting activation via 2-hand control, with protective shield - Roller conveyors and stop systems available upon request