Used Bodor I7 3Kw for sale (540)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Nwedpfxjfz Dvve Aazol ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Ostas Profile Ring Bending Machine OPK 65 Technical Specifications: • Tool holder, shaft: 60mm • Tool: 175mm • Working speed: 5m/min • Motor: 3kW • Dimensions L-W-H: 900x1250x1200mm • Weight: 1080kg • 3 driven rollers • Hardened standard rollers • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Side angle guide rollers • Digital displays (2 pcs.) • Brake motor Nsdpfefig Aiex Aazswl • Complies with CE standards

Year of construction: 2026, condition: new, ADZ SEAM CLOSER CLOSING MACHINE FOR VENTILATION DUCTS The machine is designed to be combined with the Numlock, which is most often used in ventilation systems. It is used for Nwsdpefwmtmofx Aazsl Seam closing of square and rectangular ducts made by Auto Duct Former. Quiet and fast production is achieved. Technical Specifications Power: 3Kw Power supply: 380-400V / 50-60Hz / 3 Ph Current Draw: 7.2A Working speed: 9m / min The thickness of the processed sheets: 0.5mm-1.00mm black steel, 0.5mm-0.70mm stainless steel Dimensions: W: 600 L: 4700 H: 1000mm Weight: 650Kg

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-400. Capacity - 400 litres. Max product input - 320kg. Installed power - 3kW. Njdpfx Aaehq Rgpszswl Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6 weeks for the manufacture of this machine.

Year of construction: 1950, condition: like new (used), Max working width 400mm 3 knife shaft Nwjdpfxeh Rfxme Aazjl The length of the tops is 2500mm 3kW engine Power supply 400V Cast iron

Year of construction: 1992, condition: excellent (used), Max working width 400mm 4 knife shaft The length of the tops is 2500mm 3kW engine Power supply 400V Nwsdpfx Aohzx Eroazel Cast iron

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 Nwodori Nvvspfx Aazjl - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: new, Meat grinder with mixer Manufacturer: Sind Model: S32A Nedpfx Aaep R Sbujzswl Dimensions: 800x700x1200 mm Electrical power: 3kW + 1.1kW Capacity: 800 - 1.000kg/h

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Nsdpfxjq Ny Efo Aazewl Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Nodporah S Hsfx Aazewl Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Nwsdpfxeia Taus Aazol Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height Nwsdpfxs Nn Hyj Aazel • Flexible adjustment in width

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Nwedpfsy Exaysx Aazol Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: good (used), Year of construction: 2002, 6-axis articulated robot with control and programming device. Nwodpfxjwrx Uke Aazsl KRC Software V5.2.14 Includes ZEPOL milling head type 90/150/4 of 3kW and 2850rpm with some tools.

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Nsdpsvxtrxjfx Aazswl Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Njdsxwtu Topfx Aazjwl Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: new, Year of construction: 2022, 2 dust bags Nwedpfxey N N Ipe Aazsl mobile construction motor 3kW

Condition: ready for operation (used), Year of construction: 1988, 4-side planer Brand: Gubisch Type: BS 170/3 Machine no.: 6538 Year: 1988 includes 4 cutter blocks 6 working spindles, the last universal Brake in motors Cardan drive Variable feed speed Pneumatic pressure TECHNICAL DATA Nedpfx Aaewntm Tszjwl Capacity max. wood dimension 180x120mm Spindles 6 pcs Spindle configur: Below 4kw, right 3kw, left 5.5kw, right 5.5kw, above 7.5kw, universal 7.5kw Spindle diameter 40mm Spindle speed 6000v/min Feed wheel 140x50mm Feed motor 1.5kw Motor for height adjustment 0.75kw Feed speed 0-30m/min Compressed air 6 bar, 150Nl/min Extraction nozzles 140mm in diam, air speed 25-30m/sec Power: 400 volts, 50Hz, 3 phase, 36kw, 78 AMP Dimension: 4800x1600x1500mm Weight 3800 kg Stock no.: 2002527

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports Nwsdezuw R Hepfx Aazel - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW Njdpfx Aoztrfcsazowl - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7556 Nwodpfszu R R Hex Aazsl Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses - smooth metal withdrawal roller - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 8101 TECHNICAL DATA PLANER: - roller width 500mm Nwodpfx Aaozzqrwszol - number of knives 3 pcs - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESS PLANER: - max thickness of the workpiece on the thickness planer 180mm - guard on the thickness planer roller - from top to bottom: - feed rollers - infeed roller, toothed - planing roller - outfeed roller, smooth - main motor approximately 3kW - dimensions L/W/H 2000x950x1000mm - weight 730kg ADVANTAGES - Italian made - 3-knife roller - very good condition, used machine Net price: 13900 PLN Net price: 3310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Nwodpfxezrgw Re Aazjl Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Individual components can also be sold separately after consultation. Recommended prices for individual sale: No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Condition: new, functionality: fully functional, Automatic L-sealer AMTEC SPEED 40L PRO including high speed shrink tunnel AMTEC POF-L HS Nsdpfx Aasv Hrd Nozowl PRO-version of vertically working L-bar shrink wrapper. Max. speed of the machine in neutral: 40 cycles/minute; max. product dimensions (mm): L(60-560)xW(60-430)xH(10-180), W+H max. 500mm. Power supply: ~220V, 50Hz; Power consumption: 3kW; Compressed air required: max. 0.6MPa; Compressed air consumption: 0.4m³/min; Dimensions: L3250xW1530xH1550mm. PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Speed: max. 30m/min; product dimensions (mm): W400xH300. Power supply: ~380V, 50Hz; Power consumption: 18kW; Dimensions: L1980xW1300xH1520mm.

Condition: new, Year of construction: 2025, Automatic filling and sealing machine for filling cups or containers, sealing with foil and capping with a hard plastic/hard tray lid. The rotary filling machine is suitable for various product types from liquids, pastes and powder to granular bulk materials such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. The dosing unit is selected accordingly. The Shape, dimensions and material of the cups and lids can be customized (within the range). Automatic operation from feeding of cups, filling, opening of cups, sealing with film, capping with a lid and outfeed of the cups / containers. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1200xW1200xH2000 mm; weight: approx. 800 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nsdpfxsv Nkzlo Aazswl