Used Aeg Ueb 15 for sale (16,357)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Brush air Apache 15 impregnation line, year 2016 (USED, fully operational, taken from the customer from whom it was acquired). Dwodevy Enhopfx Aggeb Complete with automatic loading and unloading conveyors.

Condition: used, mileage: 200,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 7498D ----Why Autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at Autonext – mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoker vehicle Immaculate service history, exclusively maintained at Mercedes Benz Next service due in 20,300 km New rear brakes New all-season tires (front) Body: Maxi Tourer Number of seats: 15 Roof air conditioning Controlled air conditioning (Tempmatik) Auxiliary heater Electr. side step Rear view camera Lane keeping assist Navigation system Microphone Roof window On request, we can offer you a trailer coupling retrofit for only 599 euros, and if possible, also an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * Auxiliary heater (air), electric * Generator 250 A * Audio system Audio 15 (radio with color display) * Outside temperature indicator * Battery disconnect switch 1-pole * Roof control unit with reading lamp, driver/passenger side * Entry lights * Driving assistance system: lane keeping assist * Digital tachograph, downloadable * Window for rear doors * Window in the cargo/passenger compartment: - fixed, rear left * Window in the cargo/passenger compartment: - fixed, rear right * Window in the cargo/passenger compartment: - fixed, center left * Window in the cargo/passenger compartment: - fixed, center right * Window in the cargo/passenger compartment: - fixed, front left * Window in the cargo/passenger compartment: - fixed, front right * Controlled air conditioning (Tempmatik) * Fuel filter with water separator * Light and rain sensor * Front engine drive with support for additional coolant compressor * Spare wheel with driving tires * Spare wheel carrier under frame end including jack Dodpfx Asyrwvroggewb * Rear view camera * Interior mirror * Mud flaps (front) * Seat equipment: comfort headrest, driver's seat * Seats in the cab: driver's seat, comfort * Stabilizer bar (rear) * Reinforced stabilizer bar (front) * Reinforced shock absorbers * Fuel tank sensor for auxiliary heater * Lining in the cargo/passenger compartment: standard * Fleece battery 95 Ah * Preparation for additional heat exchanger * Reinforced front axle * Thermal insulation cab * Thermal insulation cargo/passenger compartment * Heat-insulating glass (windshield with band filter at the top) * Auxiliary heater (hot water) * Intermediate partition for sliding cargo door Standard equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Anti-lock braking system (ABS), Drive type: rear-wheel drive, Indicator for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the cab, Electronic stability program (ESP), Power windows, electric 2-way, Gearbox 6-speed - TSG (Eco Gear), Glove compartment with lock, Rear door (opening angle 180 degrees), Body/Structure: High-roof standard van, Child safety lock, Fuel tank: main tank 75 L, Cargo area partition, continuous, Load securing / lashing eyes, Headlight range adjustment, Model refinement, Engine 2.1 L - 120 kW CDI CAT, Particulate filter, Wheelbase 4325 mm, Smoker's package, Pollutant emissions

Year of construction: 2023, condition: used, Empty weight: 6.500 kg Height: 20 cm Lift height: 200 cm Supply voltage: 400 V Serial number: 23515076 Working length: 1530 mm Maximum thrust: 800 kN Maximum lifting height: 200 mm Weight: 6500 kg Main motor power: 15 kW Operating voltage: 400 V/50 Hz Control voltage: 24 V DC Hydraulic operating pressure: 320 bar Hours of operation: 4,180 hours New price in 2023 (documented, from administration): EUR 120.000 Djdpfx Aozyq Iioggswb Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2020, FLIEGL SDS350 15 Meter X-TRA LONG STRAIGHT Container Chassis for 2 Swap Bodies or 2 Containers !EXTRA LONG! !! 14.85 m long!! • Mountings for 2 x 7.45 m swap bodies • or 2 x 20-foot containers • Straight chassis • 3 x SAF air-suspended 8-ton axles • Lift/lower system • ABS • ASR Dwedpjwtbvtjfx Aggeb Vehicle dimensions and weights: • Gross weight: 35,000 kg • Unladen weight: 4,100 kg • Dimensions: 14,850 x 2,550 x 1,200 mm • Tyres: 385/55 R22.5 • Tread depth: 13/13/11/12/12/9 mm - Very good condition, hardly used! - Technical Inspection (TÜV / HU / SP): NEW! - SP: 01/26 - German semi-trailer! - 1st owner Errors and prior sale reserved! = More information = Year of manufacture: 2020 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Dwjdezc Hkyepfx Aggeb

Condition: good (used), Year of construction: 1999, operating hours: 11,462 h, load capacity: 1,500 kg, lifting height: 3,500 mm, fuel type: electric, construction height: 2,200 mm, mileage: 11,462 km, Electric forklift Brand: JUNGHEINRICH Capacity: 1,500 kg Dodpfx Agozxzggegewb Equipped with a FREELIFT and a SIDESHIFT Lifting height: 3,500 mm Compact model Overall height: 2,200 mm Battery: 2006 Equipped with an external charger Make an appointment for a test drive Watch the video on YouTube.

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Dodpsxf Ikfefx Aggjwb

Condition: reconditioned (used), Year of construction: 2015, machine/vehicle number: 0-250-10-2402, functionality: fully functional, operating hours: 50,000 h, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Refurbished machining center. No.: 0-250-10-2402 TECHNICAL DATA: PERMANENTLY INTEGRATED FUNCTIONS: ▪️ V21/32 MM HIGHSPEED 7500 drilling head ▪️ Unit for making keyway grooves ▪️ H6X drilling unit ▪️ H4Y drilling unit Dsdpfx Aszu Nq Sjggowb ▪️ Tool changing spindle 10/12 KW HSK 63 (S1/S6-50%) ▪️ Drilling unit and milling unit on separate Z axes ▪️ Flange with unit connection ▪️ Tool magazine at the rear with 8 positions ▪️ Two-position magazine for unit feeding MACHINE OPERATION ▪️ WOODWOP for the machine ▪️ WOODWOP DXF IMPORT BASIC ▪️ 3D simulation for the CNC machine ▪️ Laser positioning for beams and suction cups DIMENSIONS OF WORKPIECES ▪️ Length of workpiece X, single processing – length M: 3250 ▪️ Width of workpiece Y, single processing – width M: 1400 DOCUMENTATION ▪️ Selected languages: English ▪️ Format: Data storage medium + paper documentation GENERAL INFORMATION ▪️ Control system: POWERCONTROL control with POWERTOUCH system ▪️ CE marking: YES ▪️ Operating status: Ready for operation ▪️ Year of manufacture: 2015

Condition: used, Used Silverson model GX10/1500 V range stainless steel high shear mixer. Unit direct driven by approximately 7.5kw electric motor. Stainless steel mixing shaft measures approximately 1100mm long with 100mm diameter upwards facing general purpose disintegrating head. Dwsdpfx Agozvylcjgsb

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 (documented, from administration): EUR 191.500 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dwodezyq Ivopfx Aggob Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A Dwjdpfsy R Dh Tjx Aggob • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Stephan MC 15 Vertical Microcutter / Emulsifier Brand: A. Stephan u. Söhne GmbH & Co. Model: MC 15 Power: 11 kW Voltage: 380 V 50 Hz Current: 21.5 A Dodpeyr S R Rjfx Aggewb Rotational speed: 2,900 rpm Duty cycle: ED 100 (continuous operation) Protection class: IP 44 The compact vertical Stephan MC 15 emulsifier is a reliable unit for ultra-fine chopping and homogenization of food products. With its 11 kW motor and high rotational speed (2,900 rpm), the machine excels at producing emulsions, sauces, and fine meat fillings. Its robust construction, combined with continuous operation capability (ED 100%), makes it a highly efficient component of any production line.

Condition: good (used), Year of construction: 2008, Forklift, Still, RX 20-15, Fork Positioner – used: Price at location: €6,950.00 (net)! Manufacturer: Still Model: RX 20-15 Year of manufacture: 2008 Serial number: 516210023268 Rated load capacity: 1,500 kg Operating hours: approx. 23,283 h Lifting height: 5.43 m Unladen weight: 2,021 kg Battery voltage: 48 V Battery weight min/max: 813/929 kg Rated drive power: 9 kW Includes: Rotating beacon, 2 headlights Attachment: 1T 151P4 Condition: good Dwodpszv In Ejfx Aggjb Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2014, YCM NSV 156A – Vertical Machining Center Vertical machining center with a 30-tool tool magazine, controlled in 3 axes with a Fanuc MXP-200FB control system. New Z-axis cover will be installed, 3400 cutting hours, standing under power. - Working range X/Y/Z: 1530 / 650 / 610 mm - Table surface: 1630 x 650 mm - Spindle taper: ISO 40 - Spindle motor: 22/7.5 kW (1 min/cont.) Included Optional Equipment - Spindle speed 12,000 rpm, BT40 Big Plus, 22/7.5 kW (1 min/cont.) - Tool changer/magazine for 30 tools, BT40 Big Plus - Spindle chiller - High-lift chip conveyor, hinge-belt type - Full enclosure guarding with roof - Through-spindle coolant, 20 bar, via pull stud - Heavy-duty coolant pump, 3 bar - Coolant nozzles around the spindle - Chip flush-out - Oil skimmer - Automatic main power shutoff (M30) - M-code, 1 pair - Safety door - Foundation bolts - Tool length/diameter/breakage measurement (Renishaw TS-27R) - CE marked - Prepared for 4th axis Technical Specifications – YCM NSV156A Travel Travel X/Y/Z 1530 / 650 / 610 mm Spindle nose to table surface 80 – 690 mm Table Table surface1630 x 650 mm Number of T-slots, pitch6 x 18 x 100 mm Table load capacity1500 kg Table surface to floor 950 mm Spindle (tool standard MAS BT40 Big Plus)Speed, S5 12,000 rpm Max torque 127 Nm Feed Rates traverse X/Y/Z48 m/min Working feed X/Y/Z, max1 – 20,000 mm/min Motors Spindle (1 min/10 min/cont.)22.0 / 15.0 / 7.5 kW AC X-axis feed5.5 kW AC Y-axis feed5.5 kW AC Z-axis feed 5.5 kW AC Ball Screws X/Y/Z axis Ø 45 mm Tool Changer Number of tool positions 30 Changing system Random (tools swap positions) Tool standard MAS BT40 Big Plus Pull stud YCM Max tool length 300 mm Max tool diameter (all pockets occupied)76 mm Max tool diameter (with adjacent pockets empty)125 mm Max tool weight6 kg Machine Dimensions Height 3051 mm Floor space, approx.2770 x 3855 mm Weight, approx.10,000 kg Power requirement39.5 kVA Standard Equipment NSV 66A, NSV 85A, NSV 102A and NSV 156A, with Fanuc MXP200FB control system - Spindle motor Alpha T8i (22 kW / 1 min) - Speed 12,000 rpm, max torque 127 Nm - Spindle ISO 40 - Tool standard MAS BT40 Big Plus + YCM special pull stud - Spindle chiller - Chip augers, dual, on both sides of the table - Fully enclosed guarding with roof - CE marked - Fanuc MXP200FB control system with YCM software - PCMCIA card for easy program transfer and expanded memory - Memory 1280 m (512 kb) - 10.4" TFT color display with graphics Dedpozz Ad Sjfx Aggowb - Manual Guide i – simplified menu-driven programming - AI Operation Plus - Helical interpolation - Tool offsets, total 200 - Coordinate systems: 48 - Synchronized (rigid) tapping - Macro B - Tool offset type C - High-speed function AI Nano CC - RS-232 interface

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. Dwodpezxz Dfjfx Aggob There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 537, workpiece width (max.): 1,440 mm, workpiece height (max.): 1,500 mm, Equipment: CE marking, TECHNICAL DETAILS Max. workpiece width: 1,440 mm Max. workpiece height: 1,500 mm MACHINE DETAILS Dwjdpfx Agezxchxogsb Voltage: 400 V Current consumption: 15.5 A Fuse rating: 16 A Main motor power: 8.0 kW Power: 8.0 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,500 x 1,850 mm Machine weight: 300 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: used, mileage: 4,909 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,140 kg, empty load weight: 2,360 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, tire size: 18X7-8, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 4,909 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 is a used 3-wheel electric forklift, suitable for a wide range of industrial applications. First registered on November 12, 2015, it has a mileage of 4,909 kilometers along with 4,909 operating hours. With compact dimensions of 2,055 mm in height, 990 mm in width, and 2,580 mm in length, it is particularly well-suited for confined warehouse environments. The forklift is electrically powered, making it more environmentally friendly and quieter in operation. It features a red paint finish and is equipped with an automatic transmission, greatly simplifying handling. The permitted gross weight is 3,140 kg, ensuring stable and safe operation. The truck has had one previous owner and is in well-maintained condition. Viewings can be arranged without prior appointment during our business hours. Delivery within Germany is available at an additional cost. Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Dsdpfx Aowu Ih Ejggjwb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding wheel diameter: 150 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, type of input current: three-phase, input current: 3 A, input frequency: 50 Hz, operating speed: 22 mm/s, grinding height: 30 mm, grinding length: 1,350 mm, grinding width: 90 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, overall weight: 455 kg, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Dodpfjzytw Hsx Aggswb Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg Dedoztrfcepfx Aggswb ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Dwjdpfx Agezy Nixjgob Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Dsdpfx Aexphqtjggswb Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt. Dwsdotu H Hcepfx Aggjb

Condition: good (used), Year of construction: 2015, robot handling device Sepro S5-15 S3 SPE x=500 mm y vert=700mm Z=2000mm (without R1 90°) Dodpfx Aju N Dcyeggswb year 2015 Stock: 1 · price: €14,500.00 contact: Mr. Rainer Eckerle

Condition: good (used), functionality: fully functional, power: 52 kW (70.70 HP), nominal power: 45 kW (61.18 HP), overall weight: 330 kg, For sale: AEG AM225M4 Electric Motor – 45 kW Location: Ivanka pri Nitre, Slovakia Price: 1,000 EUR Used three-phase electric motor, type AEG AM225M4, rated at 45 kW / 400 V / 50 Hz (52 kW at 60 Hz). The motor is in good mechanical condition and has been stored indoors. Suitable for industrial applications, pumps, extruders, or general heavy-duty machinery. Inspection possible by appointment. Dwjdpjxvq Dvofx Aggob Contact for more information or photos.

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation Dwsdpfsl Ikzgjx Aggob * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf