Used Andras Rotary Encoder for sale (4,607)

Condition: good (used), Fluidair RPK47 Air compressor Serial: 41449 Kdodpfx Aerq Itqja Rjt Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Kedezf Adgjpfx Aa Rodt Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: ready for operation (used), Heidenhain RON 255 rotary encoder ID no.: 263 635 01 SN: 5674119A, used, in as-new condition, 100% functional, scope of delivery as per photos. Kdedsy Nqttspfx Aa Rot

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Kdjdpfx Aaezlx E Tj Rjt Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. Kedpfx Aajzfyvys Rsdt The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm

Condition: used, HEIDENHAIN rotary encoder Kdodpfjy Sumcsx Aa Rjt Type: ROD 486 1024 27S12-03

Condition: ready for operation (used), Wolke M 600 advanced labeling system controller Device is in very good condition ( like new ) 230 V 50/60Hz Accessories: Rotary encoder for Wolke printer Splitter box for Wolke printers Kdedop T Uiqspfx Aa Rjt Print head for Wolke printer You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2011, condition: used, Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible. Ksdpfx Aez Da Nnea Rodt

Condition: ready for operation (used), Year of construction: 2021, DELTA LC 400 / Year of manufacture 2021 / Rotary table grinding machine -CE marking -Year of manufacture 2021 -Magnetic table - rotary table 300mm -Max. grinding diameter 400mm -Distance column - grinding spindle axis approx. 315mm -Grinding height - magnet - grinding wheel approx. 215mm -Grinding spindle speed 2840 rpm Kodpfx Aozrpdmja Redt -Fine feed 0.01mm -Lateral retraction device -Spindle motor approx. 3 KW -Dimensions of cup wheel 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight approx. 800kg Subject to errors and omissions.

Condition: ready for operation (used), DGS 70 AK 1000 PULS/REV rotary encoder / encoder SN: 5PK0002E0K02,used, good condition, 100% functional, scope of delivery as per photos Ksdstxuhfjpfx Aa Redt

Condition: ready for operation (used), Heidenhain ROD 250-18000 rotary encoder ID: 213 116 45 SN: 4556768E – cable length: 1m, used, in good condition, fully functional, delivery scope as per photos Kodpfx Aaex Er R Ee Redt

Condition: ready for operation (used), Rexroth RF03 12 305054 circuit board for rotary encoder with accessories, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kdsdpfx Ajzzhlzea Rjt

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Kdsdpszuzptjfx Aa Ret Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min Kedju N D Rqopfx Aa Rjdt table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We offer this overhauled HAAS TR210 rotary/tilting table, year of manufacture 2015. The TR210 is a two-axis rotary/tilting table with tailstock, providing maximum rigidity and precise performance for 3+2 and full 5-axis machining of small to medium-sized parts. Encoders on the A-axis (tilt axis) improve positioning and repeatability accuracy. The TR210 fits VF-3 and larger machines from the VF series (the extended Z-axis clearance option is highly recommended). The table has been overhauled and serviced. All worn spare parts, seals, and O-rings have been replaced. We can provide a video upon request showing flawless machining. If you have any questions or need further information, please feel free to send us a message or call us. Ksdpfxeyxw Aye Aa Rodt

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Kjdpfx Aaoxrdb Ho Rsdt Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: used, HEIDENHAIN Rotary Encoder Incremental Angle Measuring Device Kdodpjx Nqvuofx Aa Rjt Type: ROD 285C 18000 03S12-03 ID 358 699-01

Condition: used, table length 400 mm table width 400 mm table load 250 Kg table diameter 400 mm swivelling range 135 Grad turning speeds 0,2 - 3,0 stufenlos U/min total power requirement 0,3 kW weight of the machine ca. 0,115 t dimensions of the machine ca. 1,2 x 0,8 x 1,5 m Kdjdpfoz Dkywjx Aa Rjt Welding turntable with - footswitch - manual tilt/swivel - remote control - infinitely variable speed - machine base frame

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Machine: Rotary Lobe Compressor / Drehkolbenverdichter Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. Kdsdpfx Aaezucpnj Ret The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information.

Condition: new, Heidenhain RCN 226 16384 03S17-7V . 533 110-03 SN 73230177B rotary encoder, unused, 100% functional, delivery scope as per photos Kdodsy Nql Aopfx Aa Ret

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 2,500 kg, grinding spindle motor power: 11 W, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production Kodpfx Asxmhyioa Rsdt - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: new, Indramat SCS 70 6SK120310101 DSF 02 SN-S rotary encoder, VDC 7 - 12V, SN 64S020661, unused, 100% functional, scope of delivery as shown in the photos. Kdedpfxeztul Ee Aa Rjt

Condition: new, Indramat SCS 70 6SK120310101 DSF 2SN-S rotary encoder VDC 7 - 12V SN 64S020661, unused, 100% functional, scope of delivery as shown in the photos. Kjdpeztulxsfx Aa Rodt

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Kdjdpsz A R I Ssfx Aa Rjt Plus costs for dismantling and transport.

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Ksdsr Uftropfx Aa Rjdt Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph