Used Bürkle 1-Cylinder Roller Coating Machine for sale (114,822)

Year of construction: 1965, condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Fgjdpelc N Szsfx Adcsc

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Fodpfxsq A Un So Adcsgc

Year of construction: 2019, condition: ready for operation (used), Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t. Fjdpfogl Nwfex Adcegc

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Fgedow S Exuopfx Adcjc Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Fgjdotylpiopfx Adcjc

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Fgsdpetylpcjfx Adcjc

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. Fedpfxsh N Di De Adcjgc HBR will provide to the total revision.

Condition: good (used), Series of machines to make complete UV coating line Fgodpfx Aeg T U Unjdcsc

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 5,600 mm, total length: 8,600 mm, total height: 12,200 mm, overall weight: 62 kg, rotational speed (min.): 1,420 rpm, roller diameter: 127 mm, rotational speed (max.): 1,420 rpm, feed rate X-axis: 300 m/min, input voltage: 230 V, grinding belt width: 76 mm, power: 1.1 kW (1.50 HP), LAGUNA 1632 SuperMax cylindrical grinding machine - Lever for quick unit height adjustment + micro device. - Digital display of workpiece thickness. - Special design of the cylinder cover for 15 % better extraction. - Lever for lifting the table when sanding wide workpieces. - Rigid cylinder adjustment. - Intelligent feed deceleration for larger material removal. Fgodpfx Adsqv D Uuecjc - Supplied with base and crown 80 sanding belt. Developed by professionals for demanding workshops, smooth operation, narrow or wide workpieces, precise sanding and quick adjustments. - Type: 1632 SuperMax - Recommended use: Professional production - Power (230 V): 1.1 kW - Feed belt motor: 40 W - Speed: 1420 rpm - Cylinder diameter: 127 mm - Feed speed: 0-3 m/min. - Workpiece thickness min/max: 0.8 - 76 mm - Max. workpiece width: 406 (812) mm - Sanding belt width: 76 mm - Extraction: 100 mm - Minimum air flow: 1000 m3/hour - Length × width × height: 860 × 560 × 1220 mm - Weight: 62 kg - Packaging dimensions: 940 × 660 × 550 mm - Weight incl. packaging 71.7 kg Scope of delivery: - Base frame - Sanding belt, crowning 80

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 43 mm, deep-drawn - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm Fedpfx Adsxq Rt Tecsgc L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 45 mm or as agreed - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Fsdpfx Aew Spntedcsgc Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: good (used), Year of construction: 2012, Sigel coating machine Prima V6 Nordson incl pump coating machine incl filter pump S16 used condition, from running operation, overhaul by experts recommended (contact can be arranged) Fodpfxjn Rym No Adcjgc

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system Fgsdpjiuc R Hsfx Adcjc 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Available immediately. Fully working.

Condition: good (used), working width: 850 mm, total width: 4,500 mm, total length: 14,300 mm, total height: 4,200 mm, overall weight: 10,000 kg, Equipment: CE marking, Coating and laminating line for the production of multilayer materials such as BOPP, PET, CPP, paper, and aluminum foil. Equipped with double turret unwinders and winder, coating unit, laminating unit, and electric dryers. Full specification available in the photos. Fodeyfuhlopfx Adcogc

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Fgodjxw D Udspfx Adcec - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual Fgodjw Slctjpfx Adcec OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Fgodpjw Slcgefx Adcjc Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Fgjdpfx Adjw Slbvscoc Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Sakurai Aktiprint SK UV Dryer Fjdpfx Adoww Eilscegc Sakurai Automatic Stacker Fully Cleaned

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Fgedpfjtp H Erox Adcsc Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Fodpstxlyxsfx Adcegc Grinder disconnected and ready for collection.

Year of construction: 2010, operating hours: 50 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: OMMA HGS 314, Roller applicator for hot melt polyurethane adhesives. Usable working width: 1300 mm. Working thickness: from 3 mm to 80 mm. Working speed: from 5 to 25 m/min. Working temperature up to 140 °C. Adhesive applicator roller diameter: 250 mm. Installed power: 15 kW. Power supply: 400 V / 50 Hz / 3+N. Fgodpjxfb N Iefx Adcjc

Condition: new, Year of construction: 2026, functionality: fully functional, Key Features Reinforced construction – A rigid, heavy frame minimizes vibrations and ensures stability even under intensive use. Accurate sanding thickness adjustment – A mechanical height gauge allows precise setting of the desired processing depth. Fjdpfx Adjw Hb D Decsgc Precisely balanced sanding drum – Made of drawn aluminum, it ensures even contact with the material and effective cooling during operation. Versatile application – Suitable for removing old paint, lacquer, rust, as well as for smoothing and deburring. Durable metal drive coupling – Reliable torque transfer from the motor to the sanding drum. Working width up to 920 mm – Ability to sand wide panels in two passes. Construction and Technology The Cormak MM3146 stands out with its robust, industrial-grade design. The main motor, rated at 1.5 / 2.2 kW (S1/S6), combined with a reinforced 60 W feed motor, provides ample power for demanding and continuous operations. The variable-speed feed system (0–4 m/min) allows for adjustment to material type and desired finish quality. The sanding belt (2100 × 75 mm) is driven by a high-speed drum (2800 rpm), allowing for quick and effective material removal. The sanding drum is self-cooling during operation, eliminating overheating issues. A reinforced side guide enhances parallelism and stability across the entire working width. Precision and Efficiency The Cormak MM3146 drum belt sander ensures consistent results thanks to its mechanical height adjustment system with a precision scale. It supports a minimum workpiece thickness of 3.5 mm and a maximum working height of 100 mm, allowing both thin boards and thick construction components to be processed. A working width of 460 mm in a single pass (or 920 mm with dual-feed operation) provides flexibility for both small and large batch production. Applications The Cormak MM3146 through-feed sander is suitable for use in: Joinery and furniture manufacturing workshops Wood restoration studios Metalworking shops for deburring Production of plastic components Surface finishing lines for flat materials Standard Equipment Precision aluminum sanding drum Metal drum drive coupling Worktable: 460 × 465 mm Conveyor belt: 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Ø62 mm dust extraction port Optional Accessories Dust extraction system with chip separator Sets of sanding belts in various grits Infeed roller table Mobile base with brake Choose performance and professional surface finishing. The Cormak MM3146 400V drum sander is a reliable partner for both batch and one-off production – choose quality that delivers efficiency. Technical Specifications Parameter Value Motor Power S1/S6 1.5 / 2.2 kW, 400V Belt Speed 2800 rpm (for wood and metal) Sanding Belt Size 2100 × 75 mm Feed Belt Size 1120 × 450 mm Worktable Dimensions 460 × 465 mm Dust Port Diameter Ø62 mm Feed Speed 0–4 m/min Min. Material Thickness 3.5 mm Max. Working Height 100 mm Working Width 460 (920) mm Feed Motor Power 60 W Machine Dimensions 880 × 540 × 1230 mm Net/Gross Weight 134 / 160 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Machine Description The latest model of a single-drum sander with a dust extraction bag from the Cormak brand. The sander has been enhanced with new technological solutions to ensure more precise processing of wood, metal, and plastic materials (removal of old paint, derusting, sanding, deburring, etc.). Fjdpfx Adsw Hb Atjcjgc Thanks to the efforts of our technical and design team, we have achieved: A massive construction significantly heavier than the previous version Reinforced side guide of the sanding drum, improving rigidity and ensuring high precision of the workpiece over a working surface of 460 (920) mm Metal coupling transmitting drive from the motor to the sanding drum A precise mechanical gauge for easy reading of the desired sanding thickness The sanding drum, made of drawn aluminum, is precisely balanced and self-cooling, included with the machine Technical Specifications Motor Power: S1/S6 1.5 / 2.2 kW 230V Belt Speed: 2800 rpm (for wood and metal) Roller Belt Dimensions: 2100 x 75 mm Feeder Belt Dimensions: 1120 x 450 mm Worktable Dimensions: 460 x 465 mm Dust Port Diameter: Ø62 mm Feed Speed: 0~4 m/min Minimum Material Thickness: 3.5 mm Maximum Working Height: 100 mm Working Width: 460 (920) mm Reinforced Feed Motor: 60 W Dimensions: 880 x 540 x 1230 mm Net/Gross Weight: 134 / 160 kg Manufacturer: Cormak

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P Wide Belt Sander – Durable and Reliable for Workshop or Professional Use Fgsdpfxjxfhn Do Adcoc The CORMAK MM3166P wide belt sander is a robust and dependable machine, ideal for both home workshops and professional woodworking environments. With its advanced features and solid technical specifications, it enables fast, accurate sanding of wood materials, delivering a perfect finish on every project. Key Features: Dual sanding drums ensure even and precise sanding across the workpiece. Conveyor belt system facilitates smooth material feed and consistent sanding results. Powerful motor (2200 W + 120 W) guarantees effective sanding, even on harder materials. Adjustable sanding belt speed allows you to match the speed to the type of material being processed. Dust extraction system ensures a cleaner working environment and protects the operator from inhaling fine dust. Sturdy construction guarantees long-term durability and operational stability. Wide sanding belt (635 mm) enables fast processing of large surface areas. Material thickness capacity: Min. 7 mm, Max. 125 mm. Sanding drum diameter: 150 mm. Sanding belt speed: 14 m/s. Two dust extraction ports (100 mm diameter) for easy connection to dust extraction systems. Technical Specifications: Parameter Value Belt length 800 mm Belt width 635 mm Roller radius R 120 Max. workpiece thickness 130 mm Main motor power 2.2 kW Voltage 230 V Frequency 50 Hz Motor speed (at 220 V) 1800 RPM Feed motor power 120 W Feed speed 1.8 – 7.3 m/min Dust port diameter 100 mm (x2) Net / Gross weight 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Drum length 635 mm Manufacturer: Cormak