Used crushing mills for sale (35)

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex Prsdpfx Aju Nxdfodisd (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz Predpfx Aoxxirwediod INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. Psdpexud Nvsfx Adijrd P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Condition: used, Year of construction: 2010, functionality: fully functional, year of last overhaul: 2020, nominal power: 120 kW (163.15 HP), Lindemann hammer mill for sale, fully operational. Power: 120 kW. Pjdpfx Adexyuyvoierd

Condition: good (used), Year of construction: 2021, The XC series cascade mill is a modern machine designed for the efficient shredding of plastics such as PP, PVC, PA, HDPE, LDPE, rubber, films, regrinds, and wood. It features high performance, energy efficiency, and robust construction. Supplier: P&F WARTACZ PHU Type: XC-GY50HP Year of manufacture: 2021 Power supply: 400 V Main motor power: 37 kW Rotation speed: 1480 rpm Capacity: 800–1200 kg/h Pedpfjxw U Nrex Adierd Number of rotary knives: 24 pcs Number of fixed knives: 4 pcs Rotor diameter: 720 mm Rotor width: 500 mm Cutting chamber: 720 x 500 mm Weight: approx. 3000 kg Machine external dimensions: - Length: 1,870 mm - Width: 1,510 mm - Height: 2,400 mm Technical condition: used, in working order

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Size of workplace Length: 3500 mm Height: 1800 mm Width: 3000 mm Electric demand: 2,7 KW Supply voltage: 3x400 V Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us! Prjdpfxjd Nfb Ue Adisd

Condition: like new (used), “Pallmann PHPH 16-23 Grizzly” for Sale Prjdpfxoggflyo Adisd Also many other manufacturer like: Sandvik-Aubema / Hazemag / Ammann Amaro. Find our complete stock on our website. Manufacturer: Pallmann Type: PHPH 16-23 Grizzly Rotor Dia.: 1.600mm Rotor Width: 2.300mm Electrical Motor: Included Included frame and feeders.

Condition: used, Year of construction: 1990, For sale: MAKRUM 41.98 Hammer Mill – 55 kW Used MAKRUM hammer mill, model 41.98 with 55 kW motor, available for sale. The machine is in good technical condition, fully operational and ready for work. Perfect for grinding bulk materials in manufacturing plants. Podpfx Adsw Eafqsijrd Technical data: Manufacturer: MAKRUM Model: 41.98 Motor power: 55 kW Condition: Used, operational For any questions, please contact me.

Condition: new, Year of construction: 2024, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Prsdpot Iwt Ujfx Adisd reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2025, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Pjdpedwqiuefx Adijrd Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Condition: used, Year of construction: 2019, Product crushing and screening kit Manufacturer : ARKAMA Year of production: 2019 Power: 9 kW (two motors 1.5 kW each + two motors 3 kW each) Includes control cabinet with weighing meter. Prjdpovbrczefx Adiod Technical condition: used machine

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm Prodpfxjuw Skhs Adisd -Motor: 22 kW / 30 hp -Liquid cooling Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 -Motor: 22 kW / 30 hp -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: like new (used), “Hazemag Universa 1620” for Sale Manufacturer: Hazemag Type: Universa 1620 Pedpfx Adjggflvjisrd Rotor size: 1.600 x 2.000 mm Inlet size: 2.500 x 2.000 mm

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,750 kg, total height: 2,000 mm, total length: 1,560 mm, total width: 1,320 mm, We are a company with over 30 years of experience in trading machines for the plastics industry. All offered machines are available from stock, and we can perform tests on your material. The XC series granulators are designed for shredding both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are available. Control cabinets are built with Siemens components. Material trials with customer samples are possible before purchase. For any questions, please contact us via email or the provided phone number. P&F Wartacz was established in 1990 and today we are the oldest trading company in the plastics processing sector, continuously distributing injection molding machines, granulators, crushers, chillers, conveyor belts, peripheral equipment, and spare parts. Psdpfx Adow Inzwoiord Rotor diameter (mm): 500 Rotor width (mm): 720 Motor power (kW): 37 kW Rotor knives (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 The unit can be purchased with extraction and cyclone instead of a drawer. The machine is unused and available immediately, with testing possible before purchase. (Several dozen machines in stock)

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Types of MCW Shredders: MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System • Magnetic Separator SM-370 • Unloading Belt Conveyor Prjdpfxehix Hre Adisd Contact us for more information!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland. Pjdstvdcyjpfx Adisrd

Condition: good (used), Milling mill for recycling plastics The machine is used to crush soft and hard plastics, such as: plastic bottles, plastic materials such as soles, belts, extrusions, materials with low metal content, such as electrical wires or electrical boards, waste paper, paper, cardboard and rubber materials. Predovzz H Nopfx Adisd Manufacturer: PRTECHNIKA Type: MF-15 Year of production: 2012 Power: 15 kW, 400V Sieve mesh diameter: 6 mm + additional sieve with a mesh diameter of 10 mm Cutting system: 24 movable knives Cutting chamber: 470x350 mm Inlet chamber: 470x300 mm Weight: 1200 kg Includes a large cyclone and a fan without an engine Technical condition: used machine, functional, good condition, knives not damaged

Condition: like new (used), Manufacturer: Löhnert / Berger Type: SKM 20 Prjdpog Snrxefx Adijd Electrical Motor: Included See PDF-file below for more detailed information. Will be sandblasted and painted.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,800 kg, rotational speed (min.): 560 rpm, total height: 2,880 mm, total length: 2,895 mm, total width: 1,995 mm, We are a company with over 30 years of experience in the trade of machines for the plastics industry. We have the offered machines in stock and we can carry out tests on them on your material. New, efficient RG-56E series mills - (EKO) with a very good price-quality ratio are mainly used for grinding various types of soft and hard material. The optional regrind collection system based on a blower and separating cyclone ensures comfortable and safe work for the operator. Mills from this series are characterized by a compact, compact design and ease of use. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted relative to each other as they wear out. Motor overload protection and safe control voltage as standard. Psdpfewqb Tmjx Adisrd P&F Wartacz was founded in 1990 and we are currently the oldest trading company in the PTSz industry, continuously selling injection molding machines, mills, crushers, coolers, conveyor belts, peripheral equipment and spare parts. Rotor diameter (mm): 560 Rotor width (mm): 1200 Power (kW): 75kw Rotor knives (pcs): 10 Fixed knives (pcs): 4 Weight (kg): 3800 Possible purchase with exhaust and cyclone instead of a drawer Unused machine available immediately, tests possible before purchase. (dozens of machines in stock)

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Engine Power: 75 kW Weight: 1850 kg Prjdpowav Hmsfx Adisd Year of Manufacture: 2003 Technical Condition: Used

Year of construction: 2012, condition: like new (used), “LuT LTP 1000/700 SK” for Sale Find our complete stock on our website Manufacturer: LuT Type: LTP 1000/700 SK Year of Manufacture: 2012 Rotor Dia. x W.: 1.000 x 700mm Included: – 55 kW Electrical Motor – Inlet – Hydraulic pump with control panel – 500 kg Service Crane Pedpfsglvxwsx Adierd Spare-parts in stock! Crusher can be sandblasted and painted.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Predperdgkcjfx Adijd Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: good (used), Year of construction: 2016, CARBOMA single-shaft shredder A device used for final shredding of plastics, mixed municipal waste, electrical wires, electronics, rubber, glass, ceramics, paper, cardboard, wood, etc. Manufacturer: CARBOMA (currently ICT S.A. Wyry) Model: PURSAN RK 2000 Podewny Rfepfx Adijrd Year of production: 2016 Max power: 160 kW Total weight: 15,000 kg Rotor diameter: 600 mm Rotor length: 2000 mm Working shaft speed: 80-200 rpm Number of knives: 156 pcs Sieve thickness: 12 mm Sieve hole diameter: 30 mm Efficiency: up to 12 tons (depending on the type of shredded material) Technical condition: used, functional

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Pjdperbh U Asfx Adijrd Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,750 kg, total height: 2,470 mm, total length: 2,000 mm, total width: 1,530 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Power (kW): 37 kw Knives on rotor (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 Prsdpfx Ajrbg Dtedijd Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)