Used Barberan Profile Coating Machines for sale (69,104)

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Dcsdpfx Aszinzljpbon Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Dodszxw E Ejpfx Apbocn Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Dcsdsx Anpvspfx Apben Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. Dsdpozugtwofx Apbecn The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBTS 651/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2008 Dcedpfx Aezka Dzepbjn Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Condition: excellent (used), Number of spindles 3 St. Dcedoymf Ekspfx Apbjn Number of tools 8 St. Spindle diameter 50 mm Dimensions (L/W/H) 4250x1850x2300 mm Weinig Univar 6 CNC ----- Technical details summary (please ask for possibly more included equpment) ----- 1st profiling spindle: ----- > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: ----- > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 3rd profiling spindle: ----- > position: vertical right > length of spindle: 160 mm > number of revolutions: 5850 rpm > spindle diameter: 40 mm > tool diameter max.: 210 mm > engine: 3 kW More features: ----- > possible to work online: > monitor control: > Equipment for profiling small sashes: min. 500 mm > Control: PC-Nexus If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! ----- Technical details according to manufacturer - without guarantee!

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 2001 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Dsdjwink Nspfx Apbscn Available immediately.

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Number: 29 Year of construction: 2003 kW: 4 RPM: 1500 Dcodpexrz Nbjfx Apbsn

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 Djdpfx Apezi Ew Rjbscn power hydraulic bending 2,2 Kw

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers - Documentation Dcodpfxslxw Rms Apben - 230V

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Dedpfx Apjhgiuhjbecn Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Dcodpoyurx Tjfx Apbsn Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable Djdpec Uv Ncjfx Apbocn -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Very good condition. Fully working. Available immediately. Dodpfx Apot S D Umebjcn

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm Dcjdpfx Apoucqquebsn - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Dodpfovwfx Iox Apbecn

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement 4/380 kW weight of the machine ca. 1645 kg required space 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 Djdpjyk Im Ejfx Apbjcn rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 80 Upper shaft diameter: Ø 80 mm Bottom shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Optional Equipments Pipe, tube and profile bending rolls Hydraulic lateral guide rolls (2 axis) Automation with NC control

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm Dcedpfxevaw Ele Apbsn

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 220 °C, heating capacity: 33 kW (44.87 HP), workpiece height (max.): 1,700 mm, workpiece length (max.): 1,700 mm, fuel: electricity, Compact Starter Package – Powder Coating System (Oven, Spray Booth & Wagner Hand System) For sale is a complete, immediately ready-to-use starter package for powder coating. The system is delivered fully assembled (installation and assembly are not required). On-site, only electrical and compressed air connections need to be provided. Dsdpebqk Nbefx Apbjcn 💡 Tailored Solutions & Individual Customizations: Each package can be flexibly adapted to your specific requirements, workpiece sizes, and space conditions. Whether it’s modified oven dimensions, different extraction capacities, additional transport technology, or alternative coating systems – we precisely tailor the system technology to your needs! Package Components & Technical Data (Standard Version): 1. Electric Powder Curing Oven: - Usable dimensions (L x W x H): 2,000 x 1,900 x 2,000 [mm] (dimension adjustments possible upon request) - Thermal output: 33kW (electrically heated) - Max. temperature: 220°C - Recirculating air / Fan: 5,700 m³/h (2.2kW motor) - Equipment: 2 infeed rails for trolley systems, 2 swing doors, rock wool insulation (150mm), stainless steel thermal block AISI 316 2. Open Powder Spray Booth (mobile): - Dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Extraction capacity: 6,000 m³/h (3.0kW motor) - Filter: 4 filter cartridges + 1 absolute bag filter at the top - Equipment: - Mobile 60-liter powder container - Electromagnetic valves for cleaning 3. Wagner Hand-Held Powder Coating System “Sprint 2 B” - Application: Corona / Tribo hand coating - Powder output: max. 450 g/min - Processable materials: Organic, tribo, metallic, and acrylic powder coatings - Protection class: IP 64 4. Electrical Control / Control Cabinet Electronic temperature control and control of the entire system

Condition: ready for operation (used), Faccin profile bending machine Djdpey Abz Usfx Apbocn

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Year of manufacture: 2002 Dcsdex Rvmuspfx Apbsn Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Weight: 290 kg Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: Dcsdefkz Rbspfx Apbjn - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Dcodsyxwdwspfx Apbon

Condition: excellent (used), Year of construction: 2006, I sell the roller coater Cefla Sorbini Smartcoater M. Year 2006 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Dedsg D Uuiepfx Apbecn Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Working width 1300mm Very good condition. Fully working. Dcodpfx Apet S Eb Ujbon Available immediately.